基于Python進行定時任務管理封裝
更新時間：2024年12月24日 09:49:41 作者：qh0526wy
這篇文章主要為大家詳細介紹了如何基于Python進行定時任務管理封裝,文中的示例代碼講解詳細,具有一定的借鑒價值,有需要的小伙伴可以參考下
效果圖
主邏輯代碼
# -*- coding: utf-8 -*-
# import apscheduler
import pandas as pd
from datetime import datetime
# 導入調度器，此處使用BackgroundScheduler阻塞調度器
from apscheduler.schedulers.background import BackgroundScheduler
# 導入觸發器，此處使用IntervalTrigger特定時間間隔觸發
from apscheduler.triggers.interval import IntervalTrigger
from apscheduler.triggers.cron import CronTrigger
from apscheduler.triggers.date import DateTrigger
from apscheduler.executors.pool import ThreadPoolExecutor,ProcessPoolExecutor
from apscheduler.jobstores.sqlalchemy import SQLAlchemyJobStore
from apscheduler.util import undefined
import os,time,sys,random,copy,json
from QhTestJob import Ui_Form
from PyQt5.QtWidgets import QApplication
from PyQt5 import QtWidgets
from PyQt5.QtCore import Qt
# cron定時調度（某一定時時刻執行）
# (int|str) 表示參數既可以是int類型，也可以是str類型
# (datetime | str) 表示參數既可以是datetime類型，也可以是str類型
# year (int|str) – 4-digit year -（表示四位數的年份，如2008年）
# month (int|str) – month (1-12) -（表示取值范圍為1-12月）
# day (int|str) – day of the (1-31) -（表示取值范圍為1-31日）
# week (int|str) – ISO week (1-53) -（格里歷2006年12月31日可以寫成2006年-W52-7（擴展形式）或2006W527（緊湊形式））
# day_of_week (int|str) – number or name of weekday (0-6 or mon,tue,wed,thu,fri,sat,sun) - （表示一周中的第幾天，既可以用0-6表示也可以用其英語縮寫表示）
# hour (int|str) – hour (0-23) - （表示取值范圍為0-23時）
# minute (int|str) – minute (0-59) - （表示取值范圍為0-59分）
# second (int|str) – second (0-59) - （表示取值范圍為0-59秒）
# start_date (datetime|str) – earliest possible date/time to trigger on (inclusive) - （表示開始時間）
# end_date (datetime|str) – latest possible date/time to trigger on (inclusive) - （表示結束時間）
# timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations (defaults to scheduler timezone) -（表示時區取值）
# interval 間隔調度（每隔多久執行）
# weeks (int) – number of weeks to wait
# days (int) – number of days to wait
# hours (int) – number of hours to wait
# minutes (int) – number of minutes to wait
# seconds (int) – number of seconds to wait
# start_date (datetime|str) – starting point for the interval calculation
# end_date (datetime|str) – latest possible date/time to trigger on
# timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations
# date 定時調度（作業只會執行一次）
# run_date (datetime|str) – the date/time to run the job at -（任務開始的時間）
# timezone (datetime.tzinfo|str) – time zone for run_date if it doesn't have one already
def QhRR(QhVALUE,QhVALUE1):
print("{}--{}執行定時任務...".format(QhVALUE,QhVALUE1))
class QhApscheduler():
QhFiled = {
"QhJabId": "None", # 任務ID
"QhJabName": "None", # 任務名稱
"QhJabFuncName": "None", # 任務名稱 執行的程序名
"QhTimesType": "None", # 任務類型 重復 間隔 一次
"QhYear": "None", # 年
"QhMonth": "None", # 月
"QhDay": "None", # 日
"QhWeek": "None", # 周
"QhDayOfWeek": "None", # 星期幾
"QhHour": "None", # 小時
"QhMinute": "None", # 分鐘
"QhSecond": "None", # 秒鐘
"QhJabArgs": "None", # 任務參數 函數參數
"QhJabKwargs": "None", # 任務參數 函數參數
"QhJabStartDate": "None", # 開始時間
"QhJabNextRunTime": "None", # 下次運行時間
"QhJabLastRunTime": "None", # 上次運行時間
"QhJabStatus": "None" # 任務狀態
}
def __init__(self,
*args, **kwargs):
self.QhCheduPath = os.path.dirname(os.path.abspath(__file__)) #絕對路徑 用于獲取定時模塊的根目錄
print(self.QhCheduPath)
self.QhCheduPoolJobDf = self._QhinitJobPoolCsv()
QhExecutors = {
'default':ThreadPoolExecutor(20),
'processpool':ProcessPoolExecutor(10)
}
self.QhJobstores = {
'default': SQLAlchemyJobStore(url='sqlite:///QhJobPoolDb/QhJabSqlite.sqlite')
}
self.Qhscheduler = BackgroundScheduler(jobstores=self.QhJobstores,executors=QhExecutors,misfire_grace_time=3,coalescing=True)
self.Qhscheduler.start()
self._QhInitAddJobFor()
def _QhInitAddJobFor(self,QhIsFor = True):
if self.QhCheduPoolJobDf.shape[0] == 0: return
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
QhJabId = QhRow["QhJabId"]
QhJabName = QhRow["QhJabName"]
QhJabFuncName = QhRow["QhJabFuncName"]
QhTimesType = QhRow["QhTimesType"]
QhYear = self.QhGeShiZH(QhRow["QhYear"])
QhMonth = self.QhGeShiZH(QhRow["QhMonth"])
QhDay = self.QhGeShiZH(QhRow["QhDay"])
QhWeek = self.QhGeShiZH(QhRow["QhWeek"])
QhDayOfWeek = self.QhGeShiZH(QhRow["QhDayOfWeek"])
QhHour = self.QhGeShiZH(QhRow["QhHour"])
QhMinute = self.QhGeShiZH(QhRow["QhMinute"])
QhSecond = self.QhGeShiZH(QhRow["QhSecond"])
QhJabArgs = self.QhGeShiZH(QhRow["QhJabArgs"])
QhJabKwargs = self.QhGeShiZH(QhRow["QhJabKwargs"])
QhJabStartDate = QhRow["QhJabStartDate"]
QhJabNextRunTime = QhRow["QhJabNextRunTime"]
# QhJabLastRunTime = QhRow["QhJabLastRunTime"]
# QhJabEndDate = QhRow["QhJabEndDate"]
QhJabStatus = self.QhGeShiZH(QhRow["QhJabStatus"])
print(QhYear,QhMonth,QhDay,QhWeek,QhDayOfWeek,QhHour,QhMinute,QhSecond)
print(type(QhYear),type(QhMonth),type(QhDay),type(QhWeek),type(QhDayOfWeek),type(QhHour),type(QhMinute),type(QhSecond))
self.QhAddJob(QhJabId,
QhTimesType=QhTimesType,
QhJabFuncName = QhJabFuncName,
QhJabArgs=QhJabArgs,
QhJabKwargs=QhJabKwargs,
QhName = QhJabName,
QhYear = QhYear,
QhMonth = QhMonth,
QhDay = QhDay,
QhWeek = QhWeek,
QhDayOfWeek = QhDayOfWeek,
QhHour = QhHour,
QhMinute = QhMinute,
QhSecond = QhSecond,
QhIsFor = QhIsFor,
QhJabStatus=QhJabStatus)
# QhIsFor當為True時，保存到csv文件，批量增加時的場景
if QhIsFor == True:self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False,encoding='gbk')
def _QhinitJobPoolCsv(self):
# 初始化定時任務數據庫文件夾
# 作者：闕輝
QhCheduPathpd = "{}\QhJobPoolDb".format(self.QhCheduPath)
if os.path.exists(QhCheduPathpd):
print("{} is exist!".format(QhCheduPathpd))
else:
os.mkdir(QhCheduPathpd)
print("{} is not exist, create it!".format(QhCheduPathpd))
self.QhCheduPoolJobCsv = "{}\QhJobPoolCsv.csv".format(QhCheduPathpd)
if not os.path.exists(self.QhCheduPoolJobCsv):
QhFiled = list(QhApscheduler.QhFiled.keys())
self.QhCheduPoolJobDf = pd.DataFrame(columns=QhFiled)
self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False)
else:
self.QhCheduPoolJobDf = pd.read_csv(self.QhCheduPoolJobCsv, encoding='gbk')
self.QhCheduPoolJobDf.fillna("None", inplace=True)
return self.QhCheduPoolJobDf
def QhAddJob(self,
QhJabId,
QhTimesType, # 重復 間隔 一次
QhJabFuncName,
QhJabArgs=None,
QhJabKwargs=None,
QhName=None,
QhYear = None,
QhMonth = None,
QhDay = None,
QhWeek = None,
QhDayOfWeek = None,
QhHour = None,
QhMinute = None,
QhSecond = None,
QhStartDate = None,
QhEndDate = None,
QhTimezone=None,
QhJitter=None,
misfire_grace_time=undefined,
next_run_time=undefined,
jobstore='default',
executor='default',
coalesce=undefined,
max_instances=undefined,
replace_existing=False,
QhIsFor = False,
QhJabStatus = None,
QhJobIsOpen = False,
):
if self.Qhscheduler.get_job(QhJabId):
print("{} is exist!".format(QhJabId))
return # 如果任務已經存在，則不添加
if QhJabStatus == "已關閉" and (not QhJobIsOpen):
print("{} 任務已關閉，不用新建!".format(QhJabId))
return
QhTiggers = self.QhTiggers(QhTimesType =QhTimesType,
QhYear = QhYear,
QhMonth = QhMonth,
QhDay = QhDay,
QhWeek = QhWeek,
QhDayOfWeek = QhDayOfWeek,
QhHour = QhHour,
QhMinute = QhMinute,
QhSecond = QhSecond,
QhStartDate = QhStartDate,
QhEndDate = QhEndDate,
QhTimezone=QhTimezone,
QhJitter=QhJitter)
if QhJabArgs!=None:
QhJabArgs = tuple(QhJabArgs.split("+"))
if QhJabKwargs != None:
QhJabKwargs = QhJabKwargs.replace("+",',')
QhJabKwargs = QhJabKwargs.replace("'",'"')
QhJabKwargs = json.loads(QhJabKwargs)
self.Qhscheduler.add_job(func=globals()[QhJabFuncName],
trigger=QhTiggers,
args=QhJabArgs,
kwargs=QhJabKwargs,
id=QhJabId,
name=QhName,
misfire_grace_time=misfire_grace_time,
next_run_time=next_run_time,
jobstore=jobstore,
executor=executor,
coalesce=coalesce,
max_instances=max_instances,
replace_existing=replace_existing,)
# 函數參數還原輸入格式處理 闕輝
# print(QhJabArgs,type(QhJabArgs))
if isinstance(QhJabArgs, tuple):
QhJabArgs = str(QhJabArgs).replace("'",'').replace("(",'').\
replace(")",'').replace(",","+").replace("+ ","+").replace("+ ","+")
# print(QhJabArgs,type(QhJabArgs))
# print(QhJabKwargs,type(QhJabKwargs))
if isinstance(QhJabKwargs, dict):
QhJabKwargs = str(QhJabKwargs).replace("'",'"').replace(",","+")
# print(QhJabKwargs,type(QhJabKwargs))
QhAddJoblDic = copy.deepcopy(QhApscheduler.QhFiled)
QhAddJoblDic["QhJabId"] = QhJabId
QhAddJoblDic["QhJabName"] = QhName
QhAddJoblDic["QhJabFuncName"] = "None" if QhJabFuncName==None else QhJabFuncName
QhAddJoblDic["QhTimesType"] = QhTimesType
QhAddJoblDic["QhYear"] = "None" if QhYear==None else QhYear
QhAddJoblDic["QhMonth"] = "None" if QhMonth==None else QhMonth
QhAddJoblDic["QhDay"] = "None" if QhDay==None else QhDay
QhAddJoblDic["QhWeek"] = "None" if QhWeek==None else QhWeek
QhAddJoblDic["QhDayOfWeek"] = "None" if QhDayOfWeek==None else QhDayOfWeek
QhAddJoblDic["QhHour"] = "None" if QhHour==None else QhHour
QhAddJoblDic["QhMinute"] = "None" if QhMinute==None else QhMinute
QhAddJoblDic["QhSecond"] = "None" if QhSecond==None else QhSecond
QhAddJoblDic["QhJabArgs"] = "None" if QhJabArgs==None else QhJabArgs
QhAddJoblDic["QhJabKwargs"] = "None" if QhJabKwargs==None else QhJabKwargs
# QhAddJoblDic["QhJabStartDate"] = "None"
# QhAddJoblDic["QhJabNextRunTime"] = "None"
# QhAddJoblDic["QhJabLastRunTime"] = "None"
QhAddJoblDic["QhJabStatus"] = "已運行"
try: # 任務id存在，則更新任務，不存在則新增
self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf["QhJabId"]==QhJabId].index[0]
for QhKey,QhValue in QhAddJoblDic.items():
if QhKey == "QhJabId":continue
self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf["QhJabId"]==QhJabId,QhKey] = QhValue
except:
QhCheduPoolJobDfRow = pd.DataFrame([QhAddJoblDic])
print(QhCheduPoolJobDfRow)
try:
self.QhCheduPoolJobDf = self.QhCheduPoolJobDf._append(QhCheduPoolJobDfRow)
except:
self.QhCheduPoolJobDf = self.QhCheduPoolJobDf.append(QhCheduPoolJobDfRow)
print(self.QhCheduPoolJobDf)
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
if (not QhIsFor):self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False,encoding='gbk')
def QhTiggers(self,QhTimesType,
QhYear = None,
QhMonth = None,
QhDay = None,
QhWeek = None,
QhDayOfWeek = None,
QhHour = None,
QhMinute = None,
QhSecond = None,
QhStartDate = None,
QhEndDate = None,
QhTimezone=None,
QhJitter=None
):
if QhTimesType == "重復":
QhTiggers = CronTrigger(year=QhYear,
month=QhMonth,
day=QhDay,
week=QhWeek,
day_of_week=QhDayOfWeek,
hour=QhHour,
minute=QhMinute,
second=QhSecond,
start_date=QhStartDate,
end_date=QhEndDate,
timezone=QhTimezone,
jitter=QhJitter)
elif QhTimesType == "間隔":
QhTiggers = IntervalTrigger(weeks= int(0) if QhWeek == None else QhWeek,
days= 0 if QhDay == None else QhDay,
hours= 0 if QhHour == None else QhHour,
minutes= 0 if QhMinute == None else QhMinute,
seconds= 0 if QhSecond == None else QhSecond,
start_date=QhStartDate,
end_date=QhEndDate,
timezone=QhTimezone,
jitter=QhJitter)
elif QhTimesType == "一次":
QhRunDate = datetime(0 if QhYear == None else QhYear,
0 if QhMonth == None else QhMonth,
0 if QhDay == None else QhDay,
0 if QhHour == None else QhHour,
0 if QhMinute == None else QhMinute,
0 if QhSecond == None else QhSecond)
QhTiggers = DateTrigger(run_date=QhRunDate,
timezone=QhTimezone)
return QhTiggers
def QhPauseJob(self,QhJabId,QhIsFor=False):
# 暫停任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
try:
if QhJabId == "":
print("任務ID不能空，請輸入任務ID")
return
if self.Qhscheduler.get_job(QhJabId):
self.Qhscheduler.pause_job(QhJabId)
print("暫停任務",QhJabId)
self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'] = '已暫停'
if (not QhIsFor):self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False, encoding='gbk')
# AA = self.Qhscheduler.get_job(QhJabId)
# print(AA.state)
else:
print("暫停失敗,請檢查任務ID,任務可能不存在")
except:
print("暫停失敗,請檢查任務ID,任務可能不存在")
def QhPauseJobFor(self,QhIsFor=True):
# 暫停所有任務
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
self.QhPauseJob(QhRow['QhJabId'],QhIsFor)
def QhGetJobsState(self):
for job in self.Qhscheduler.get_jobs():
print(f"Job ID: {job.id}, 任務的下一次運行時間: {job.next_run_time}")
print(f"Job ID: {job.id}, 任務是否有待執行: {job.pending}")
# print(f"Job ID: {job.id}, 任務是否有待執行: {job.job_state}")
# print(f"Job ID: {job.id}, 任務是否正在運行: {job.running}")
def QhResumeJob(self,QhJabId,QhIsFor=False):
# 恢復任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
try:
if QhJabId == "":
print("任務ID不能空，請輸入任務ID")
return
if self.Qhscheduler.get_job(QhJabId):
self.Qhscheduler.resume_job(QhJabId)
print("恢復任務",QhJabId)
self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'] = '已運行'
if (not QhIsFor):self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False, encoding='gbk')
else:
print("恢復失敗,請檢查任務ID,任務可能不存在")
except:
print("恢復失敗,請檢查任務ID,任務可能不存在")
def QhResumeJobFor(self,QhIsFor=True):
# 恢復所有任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
self.QhResumeJob(QhRow['QhJabId'],QhIsFor)
def QhRemoveJob(self,QhJabId,QhIsFor=False):
# 刪除任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
try:
if QhJabId == "":
print("任務ID不能空，請輸入任務ID")
return
if self.Qhscheduler.get_job(QhJabId):
self.Qhscheduler.remove_job(QhJabId)
print("刪除任務",QhJabId)
self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'] = '已關閉'
if (not QhIsFor):self.QhCheduPoolJobDf.to_csv(self.QhCheduPoolJobCsv, index=False, encoding='gbk')
else:
print("刪除失敗,請檢查任務ID,任務可能不存在")
except:
print("刪除失敗,請檢查任務ID,任務可能不存在")
def QhRemoveJobFor(self,QhIsFor=True):
# 刪除所有任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
self.QhRemoveJob(QhRow['QhJabId'],QhIsFor)
def QhReopenJob(self,QhJabId,QhIsFor=False):
# 重新打開任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
# try:
if QhJabId == "":
print("任務ID不能空，請輸入任務ID")
return
QhJabStatus = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'].values[0])
if not self.Qhscheduler.get_job(QhJabId):
if QhJabStatus == "已關閉":
# QhJabId = QhRow["QhJabId"]
QhJabName = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabName'].values[0]
QhJabFuncName = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabFuncName'].values[0]
QhTimesType = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhTimesType'].values[0]
QhYear = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhYear'].values[0])
QhMonth = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhMonth'].values[0])
QhDay = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhDay'].values[0])
QhWeek = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhWeek'].values[0])
QhDayOfWeek = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhDayOfWeek'].values[0])
QhHour = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhHour'].values[0])
QhMinute = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhMinute'].values[0])
QhSecond = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhSecond'].values[0])
QhJabArgs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabArgs'].values[0])
QhJabKwargs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabKwargs'].values[0])
QhJabStartDate = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStartDate'].values[0]
QhJabNextRunTime = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabNextRunTime'].values[0]
# QhJabLastRunTime = QhRow["QhJabLastRunTime"]
# QhJabEndDate = QhRow["QhJabEndDate"]
# QhJabStatus = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'].values[0])
print(QhYear,QhMonth,QhDay,QhWeek,QhDayOfWeek,QhHour,QhMinute,QhSecond)
print(type(QhYear),type(QhMonth),type(QhDay),type(QhWeek),type(QhDayOfWeek),type(QhHour),type(QhMinute),type(QhSecond))
self.QhAddJob(QhJabId,
QhTimesType=QhTimesType,
QhJabFuncName = QhJabFuncName,
QhJabArgs=QhJabArgs,
QhJabKwargs=QhJabKwargs,
QhName = QhJabName,
QhYear = QhYear,
QhMonth = QhMonth,
QhDay = QhDay,
QhWeek = QhWeek,
QhDayOfWeek = QhDayOfWeek,
QhHour = QhHour,
QhMinute = QhMinute,
QhSecond = QhSecond,
QhJabStatus=QhJabStatus,
QhIsFor = QhIsFor,
QhJobIsOpen = True) # 狀態已在此函數更新
# except:
# print("打開任務失敗,請檢查任務ID,任務可能不存在")
def QhReopenJobFor(self,QhIsFor=True):
# 重新打開所有任務
# QhIsFor當為False時，保存到csv文件，單個增加時的場景
# 闕輝
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
self.QhReopenJob(QhRow['QhJabId'],QhIsFor)
def QhShouDongRunJob(self,QhJabId):
# 手動運行任務
# 闕輝
try:
if QhJabId == "":
print("任務ID不能空，請輸入任務ID")
return
# if self.Qhscheduler.get_job(QhJabId):
QhJabFuncName = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabFuncName'].values[0]
QhJabArgs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabArgs'].values[0])
QhJabKwargs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabKwargs'].values[0])
QhJabFunc = globals().get(QhJabFuncName)
if QhJabFunc:
if QhJabArgs!= None:
QhJabArgs = tuple(QhJabArgs.split("+"))
QhJabFunc(*QhJabArgs)
elif QhJabKwargs != None:
QhJabKwargs = QhJabKwargs.replace("+",',')
QhJabKwargs = QhJabKwargs.replace("'",'"')
QhJabKwargs = json.loads(QhJabKwargs)
QhJabFunc(**QhJabKwargs)
else:
print(f"Function '{QhJabFuncName}' not found.")
# self.Qhscheduler.run_job(QhJabId)
print("手動執行任務",QhJabId)
except Exception as e:
print(f"An error occurred while executing the job: {e}")
print("2手動執行任務失敗,請檢查任務ID,任務可能不存在")
def QhShouDongRunJobFor(self):
# 手動運行所有任務
# 闕輝
for QhInx,QhRow in self.QhCheduPoolJobDf.iterrows():
self.QhShouDongRunJob(QhRow['QhJabId'])
def QhXiuGaiJob(self,QhJabId,
QhIsFor=True):
# 修改任務方案：先刪除，修改后重新添加
pass
# self.QhCheduPoolJobDf = self._QhinitJobPoolCsv() # 重新加載任務池?cái)?shù)據
# QhJabName = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabName'].values[0]
# QhJabFuncName = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabFuncName'].values[0]
# QhTimesType = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhTimesType'].values[0]
# QhYear = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhYear'].values[0])
# QhMonth = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhMonth'].values[0])
# QhDay = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhDay'].values[0])
# QhWeek = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhWeek'].values[0])
# QhDayOfWeek = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhDayOfWeek'].values[0])
# QhHour = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhHour'].values[0])
# QhMinute = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhMinute'].values[0])
# QhSecond = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhSecond'].values[0])
# QhJabArgs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabArgs'].values[0])
# QhJabKwargs = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabKwargs'].values[0])
# QhJabStartDate = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStartDate'].values[0]
# QhJabNextRunTime = self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabNextRunTime'].values[0]
# # QhJabLastRunTime = QhRow["QhJabLastRunTime"]
# # QhJabEndDate = QhRow["QhJabEndDate"]
# # QhJabStatus = self.QhGeShiZH(self.QhCheduPoolJobDf.loc[self.QhCheduPoolJobDf['QhJabId'] == QhJabId, 'QhJabStatus'].values[0])
# print(QhYear,QhMonth,QhDay,QhWeek,QhDayOfWeek,QhHour,QhMinute,QhSecond)
# print(type(QhYear),type(QhMonth),type(QhDay),type(QhWeek),type(QhDayOfWeek),type(QhHour),type(QhMinute),type(QhSecond))
# self.Qhscheduler.modify_job()
def QhGeShiZH(self,QhValue):
# 時間格式轉化 后期需要優化
# 作者：闕輝
try:
if isinstance(QhValue, str):
if QhValue in ["None","","0"]:
# print("zhuan01")
return None
else:
try:
# print("zhuan02")
return int(QhValue)
except:
# print("zhuan03")
return QhValue
else:
# print("zhuan04")
return int(QhValue)
except:
# print("zhuan05")
return None
class QhTestApschedulerGui(QtWidgets.QWidget,Ui_Form):
def __init__(self, parent=None):
super(QhTestApschedulerGui, self).__init__(parent)
self.setupUi(self)
self.aa=QhApscheduler()
self.pushButton_2.clicked.connect(self.QhPauseJob)
self.pushButton_18.clicked.connect(self.QhResumeJob)
self.pushButton_19.clicked.connect(self.aa.QhGetJobsState)
self.pushButton.clicked.connect(self.QhAddJob)
self.pushButton_3.clicked.connect(self.QhRemoveJob)
self.pushButton_20.clicked.connect(self.aa.QhPauseJobFor)
self.pushButton_21.clicked.connect(self.aa.QhResumeJobFor)
self.pushButton_22.clicked.connect(self.aa.QhRemoveJobFor)
self.pushButton_23.clicked.connect(self.aa.QhReopenJobFor)
self.pushButton_6.clicked.connect(self.QhReopenJob)
self.pushButton_4.clicked.connect(self.QhShouDongRunJob)
self.pushButton_24.clicked.connect(self.aa.QhShouDongRunJobFor)
def QhAddJob(self):
QhJobId = self.lineEdit_5.text()
if QhJobId == "":
print("任務ID不能空，請輸入任務ID")
return
QhJobName = "{}-Name".format(QhJobId)
QhScoends = random.randint(8, 20)
QhTimesType = "間隔"
QhJabFuncName = "QhRR"
self.aa.QhAddJob(QhJobId,
QhTimesType=QhTimesType,
QhJabFuncName = QhJabFuncName,
QhName = QhJobName,
QhSecond = QhScoends,
QhJabArgs = "{QhJobId}-測試順序+QUEHUI".format(QhJobId=QhJobId),
)
print("添加任務{(diào)}".format(QhJobId))
def QhPauseJob(self):
QhJobId = self.lineEdit.text()
print(QhJobId)
self.aa.QhPauseJob(QhJobId)
def QhResumeJob(self):
QhJobId = self.lineEdit_18.text()
print(QhJobId)
self.aa.QhResumeJob(QhJobId)
def QhRemoveJob(self):
QhJobId = self.lineEdit_2.text()
print(QhJobId)
self.aa.QhRemoveJob(QhJobId)
def QhReopenJob(self):
QhJobId = self.lineEdit_6.text()
print(QhJobId)
self.aa.QhReopenJob(QhJobId)
def QhShouDongRunJob(self):
QhJobId = self.lineEdit_3.text()
print(QhJobId)
self.aa.QhShouDongRunJob(QhJobId)
if __name__ == '__main__':
# aa=QhApscheduler()
# aa._QhInitAddJobFor()
# # 保持主線程運行
# try:
# while True:
# time.sleep(2)
# except (KeyboardInterrupt, SystemExit):
# aa.Qhscheduler.shutdown()
QApplication.setHighDpiScaleFactorRoundingPolicy(
Qt.HighDpiScaleFactorRoundingPolicy.PassThrough)
QApplication.setAttribute(Qt.AA_EnableHighDpiScaling)
QApplication.setAttribute(Qt.AA_UseHighDpiPixmaps)
qh_app = QApplication(sys.argv) # 創建應用實例
qh_MyWindows = QhTestApschedulerGui() # 創建窗口實例
qh_MyWindows.show() # 顯示窗口
qh_n = qh_app.exec() # 執行exec()方法，進入事件循環，如果遇到窗口退出命令，返回整數qh_n
print(qh_n) # 輸出輸出關閉事件返回的整數
try: # 捕獲程序退出事件
sys.exit(qh_n) # 通知python系統，結束程序運行
except SystemExit:
print("請?jiān)诖俗鲆恍┢渌ぷ鳌?) # python解釋器停止執行前的工作UI代碼
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'QhTestJob.ui'
#
# Created by: PyQt5 UI code generator 5.15.7
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_Form(object):
def setupUi(self, Form):
Form.setObjectName("Form")
Form.resize(632, 610)
self.gridLayout = QtWidgets.QGridLayout(Form)
self.gridLayout.setObjectName("gridLayout")
self.verticalLayout = QtWidgets.QVBoxLayout()
self.verticalLayout.setObjectName("verticalLayout")
self.horizontalLayout_5 = QtWidgets.QHBoxLayout()
self.horizontalLayout_5.setObjectName("horizontalLayout_5")
self.pushButton = QtWidgets.QPushButton(Form)
self.pushButton.setObjectName("pushButton")
self.horizontalLayout_5.addWidget(self.pushButton)
self.lineEdit_5 = QtWidgets.QLineEdit(Form)
self.lineEdit_5.setMinimumSize(QtCore.QSize(500, 28))
self.lineEdit_5.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_5.setObjectName("lineEdit_5")
self.horizontalLayout_5.addWidget(self.lineEdit_5)
self.verticalLayout.addLayout(self.horizontalLayout_5)
self.horizontalLayout_4 = QtWidgets.QHBoxLayout()
self.horizontalLayout_4.setObjectName("horizontalLayout_4")
self.pushButton_2 = QtWidgets.QPushButton(Form)
self.pushButton_2.setObjectName("pushButton_2")
self.horizontalLayout_4.addWidget(self.pushButton_2)
self.lineEdit = QtWidgets.QLineEdit(Form)
self.lineEdit.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit.setObjectName("lineEdit")
self.horizontalLayout_4.addWidget(self.lineEdit)
self.verticalLayout.addLayout(self.horizontalLayout_4)
self.horizontalLayout_18 = QtWidgets.QHBoxLayout()
self.horizontalLayout_18.setObjectName("horizontalLayout_18")
self.pushButton_18 = QtWidgets.QPushButton(Form)
self.pushButton_18.setObjectName("pushButton_18")
self.horizontalLayout_18.addWidget(self.pushButton_18)
self.lineEdit_18 = QtWidgets.QLineEdit(Form)
self.lineEdit_18.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit_18.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_18.setObjectName("lineEdit_18")
self.horizontalLayout_18.addWidget(self.lineEdit_18)
self.verticalLayout.addLayout(self.horizontalLayout_18)
self.horizontalLayout_3 = QtWidgets.QHBoxLayout()
self.horizontalLayout_3.setObjectName("horizontalLayout_3")
self.pushButton_3 = QtWidgets.QPushButton(Form)
self.pushButton_3.setObjectName("pushButton_3")
self.horizontalLayout_3.addWidget(self.pushButton_3)
self.lineEdit_2 = QtWidgets.QLineEdit(Form)
self.lineEdit_2.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit_2.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_2.setObjectName("lineEdit_2")
self.horizontalLayout_3.addWidget(self.lineEdit_2)
self.verticalLayout.addLayout(self.horizontalLayout_3)
self.horizontalLayout_6 = QtWidgets.QHBoxLayout()
self.horizontalLayout_6.setObjectName("horizontalLayout_6")
self.pushButton_6 = QtWidgets.QPushButton(Form)
self.pushButton_6.setObjectName("pushButton_6")
self.horizontalLayout_6.addWidget(self.pushButton_6)
self.lineEdit_6 = QtWidgets.QLineEdit(Form)
self.lineEdit_6.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit_6.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_6.setObjectName("lineEdit_6")
self.horizontalLayout_6.addWidget(self.lineEdit_6)
self.verticalLayout.addLayout(self.horizontalLayout_6)
self.horizontalLayout_2 = QtWidgets.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
self.pushButton_4 = QtWidgets.QPushButton(Form)
self.pushButton_4.setObjectName("pushButton_4")
self.horizontalLayout_2.addWidget(self.pushButton_4)
self.lineEdit_3 = QtWidgets.QLineEdit(Form)
self.lineEdit_3.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit_3.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_3.setObjectName("lineEdit_3")
self.horizontalLayout_2.addWidget(self.lineEdit_3)
self.verticalLayout.addLayout(self.horizontalLayout_2)
self.horizontalLayout = QtWidgets.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
self.pushButton_5 = QtWidgets.QPushButton(Form)
self.pushButton_5.setObjectName("pushButton_5")
self.horizontalLayout.addWidget(self.pushButton_5)
self.lineEdit_4 = QtWidgets.QLineEdit(Form)
self.lineEdit_4.setMinimumSize(QtCore.QSize(230, 28))
self.lineEdit_4.setMaximumSize(QtCore.QSize(500, 16777215))
self.lineEdit_4.setObjectName("lineEdit_4")
self.horizontalLayout.addWidget(self.lineEdit_4)
self.verticalLayout.addLayout(self.horizontalLayout)
self.pushButton_19 = QtWidgets.QPushButton(Form)
self.pushButton_19.setObjectName("pushButton_19")
self.verticalLayout.addWidget(self.pushButton_19)
self.pushButton_24 = QtWidgets.QPushButton(Form)
self.pushButton_24.setObjectName("pushButton_24")
self.verticalLayout.addWidget(self.pushButton_24)
self.pushButton_20 = QtWidgets.QPushButton(Form)
self.pushButton_20.setObjectName("pushButton_20")
self.verticalLayout.addWidget(self.pushButton_20)
self.pushButton_21 = QtWidgets.QPushButton(Form)
self.pushButton_21.setObjectName("pushButton_21")
self.verticalLayout.addWidget(self.pushButton_21)
self.pushButton_22 = QtWidgets.QPushButton(Form)
self.pushButton_22.setObjectName("pushButton_22")
self.verticalLayout.addWidget(self.pushButton_22)
self.pushButton_23 = QtWidgets.QPushButton(Form)
self.pushButton_23.setObjectName("pushButton_23")
self.verticalLayout.addWidget(self.pushButton_23)
self.gridLayout.addLayout(self.verticalLayout, 0, 0, 1, 1)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
def retranslateUi(self, Form):
_translate = QtCore.QCoreApplication.translate
Form.setWindowTitle(_translate("Form", "Form"))
self.pushButton.setText(_translate("Form", "添加任務"))
self.pushButton_2.setText(_translate("Form", "暫停任務"))
self.pushButton_18.setText(_translate("Form", "啟動任務"))
self.pushButton_3.setText(_translate("Form", "刪除任務"))
self.pushButton_6.setText(_translate("Form", "打開任務"))
self.pushButton_4.setText(_translate("Form", "手動執行"))
self.pushButton_5.setText(_translate("Form", "獲取任務狀態"))
self.pushButton_19.setText(_translate("Form", "獲取所有任務的狀態"))
self.pushButton_24.setText(_translate("Form", "手動執行所有任務"))
self.pushButton_20.setText(_translate("Form", "暫停所有任務"))
self.pushButton_21.setText(_translate("Form", "恢復所有任務"))
self.pushButton_22.setText(_translate("Form", "關閉所有任務"))
self.pushButton_23.setText(_translate("Form", "打開所有任務"))到此這篇關于基于Python進行定時任務管理封裝的文章就介紹到這了,更多相關Python定時任務內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要介紹了Python讀取表格類型文件代碼實例,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-02-02
這篇文章主要介紹了二十種Python代碼游戲源代碼分享,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-04-04
python遞歸調用中的坑:打印有值, 返回卻None
這篇文章主要介紹了python遞歸調用中的坑:打印有值, 返回卻None,本文通過問題分析給出解決方法，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-03-03
在性能和資源占用方面,venv?通常更適合輕量級項目、純Python應用以及對資源敏感的場景,其簡單快速的特點使得環境創建和管理更為高效,這篇文章主要介紹了Python虛擬環境conda的安裝使用教程,需要的朋友可以參考下2024-03-03
python pygame實現2048游戲
這篇文章主要為大家詳細介紹了python pygame實現2048游戲，具有一定的參考價值，感興趣的小伙伴們可以參考一下2018-11-11
這篇文章主要介紹了django解決訂單并發問題，本文給大家介紹的非常詳細，具有一定的參考借鑒價值,需要的朋友可以參考下2019-07-07
淺談django url請求與數據庫連接池的共享問題
今天小編就為大家分享一篇淺談django url請求與數據庫連接池的共享問題，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2019-08-08
Django 如何使用日期時間選擇器規范用戶的時間輸入示例代碼詳解
這篇文章主要介紹了 Django 如何使用日期時間選擇器規范用戶的時間輸入，本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-05-05
這篇文章主要介紹了Python中的整除和取模實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2020-06-06
pytorch 如何自定義卷積核權值參數
這篇文章主要介紹了pytorch 自定義卷積核權值參數的操作，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2021-05-05