SpringSecurity在單機環境下使用方法詳解
參考
來源于黑馬程序員: 手把手教你精通新版SpringSecurity
技術選型
SpringBoot2.1.3,SpringSecurity,MySQL,mybatis,jsp
初步整合認證第一版
創建工程并導入jar包
先只導入SpringBoot
<parent>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-parent</artifactId>
<version>2.1.3.RELEASE</version>
<relativePath/>
</parent>
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
</dependencies>提供處理器
@Controller
@RequestMapping("/product")
public class ProductController {
@RequestMapping
@ResponseBody
public String hello(){
return "success";
}
}編寫啟動類
@SpringBootApplication
public class SecurityApplication {
public static void main(String[] args) {
SpringApplication.run(SecurityApplication.class, args);
}
}測試效果
使用SpringBoot內置tomcat啟動項目,即可訪問處理器。

加入SpringSecurity的jar包
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-security</artifactId>
</dependency>重啟再次測試
SpringBoot已經為SpringSecurity提供了默認配置,默認所有資源都必須認證通過才能訪問。

那么問題來了!此刻并沒有連接數據庫,也并未在內存中指定認證用戶,如何認證呢?
其實SpringBoot已經提供了默認用戶名user,密碼在項目啟動時隨機生成,如圖:

認證通過后可以繼續訪問處理器資源:

整合認證第二版
加入jsp,使用自定義認證頁面
說明
SpringBoot官方是不推薦在SpringBoot中使用jsp的,那么到底可以使用嗎?答案是肯定的!
不過需要導入tomcat插件啟動項目,不能再用SpringBoot默認tomcat了。
我們不能 通過啟動類的方式來進行啟動了,因?yàn)樗鼤?huì)不識別Jsp頁面,必須導入jar包,然后更換方法
導入SpringBoot的tomcat啟動插件jar包
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-tomcat</artifactId>
</dependency>
<dependency>
<groupId>org.apache.tomcat.embed</groupId>
<artifactId>tomcat-embed-jasper</artifactId>
</dependency>加入jsp頁面等靜態資源
在src/main目錄下創建webapp目錄

這時webapp目錄并不能正常使用,因?yàn)橹挥衱eb工程才有webapp目錄,在pom文件中修改項目為web工程

這時webapp目錄,可以正常使用了!

導入第一天案例中靜態資源,注意WEB-INF就不用了哈!

修改login.jsp中認證的url地址

修改header.jsp中退出登錄的url地址

提供SpringSecurity配置類
@Configuration
@EnableWebSecurity
@EnableGlobalMethodSecurity(securedEnabled=true)
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {
@Autowired
private UserService userService;
@Bean
public BCryptPasswordEncoder passwordEncoder(){
return new BCryptPasswordEncoder();
}
//指定認證對象的來源
public void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.userDetailsService(userService).passwordEncoder(passwordEncoder());
}
//SpringSecurity配置信息
public void configure(HttpSecurity http) throws Exception {
http.authorizeRequests()
.antMatchers("/login.jsp", "failer.jsp", "/css/**", "/img/**", "/plugins/**").permitAll()
.antMatchers("/product").hasAnyRole("USER")
.anyRequest().authenticated()
.and()
.formLogin()
.loginPage("/login.jsp")
.loginProcessingUrl("/login")
.successForwardUrl("/index.jsp")
.failureForwardUrl("/failer.jsp")
.and()
.logout()
.logoutSuccessUrl("/logout")
.invalidateHttpSession(true)
.logoutSuccessUrl("/login.jsp")
.and()
.csrf()
.disable();
}
}修改產品處理器
有頁面了,就跳轉一個真的吧!
@Controller
@RequestMapping("/product")
public class ProductController {
@RequestMapping("/findAll")
public String findAll(){
return "product-list";
}
}配置視圖解析器

使用tomcat插件啟動項目

測試效果
自定義的認證頁面

認證成功頁面

整合認證第三版【數據庫認證】 數據庫環境準備
依然使用security_authority數據庫,sql語句在第一天資料里。
導入數據庫操作相關jar包
<!--MySQL驅動包-->
<dependency>
<groupId>mysql</groupId>
<artifactId>mysql-connector-java</artifactId>
<version>5.1.47</version>
</dependency>
<!--springboot啟動類-->
<dependency>
<groupId>tk.mybatis</groupId>
<artifactId>mapper-spring-boot-starter</artifactId>
<version>2.1.5</version>
</dependency>
<!--導入通用Mapper-->
<dependency>
<groupId>tk.mybatis</groupId>
<artifactId>mapper-spring-boot-starter</artifactId>
<version>2.1.5</version>
</dependency>在配置文件中添加數據庫操作相關配置

在啟動類上添加掃描dao接口包注解

創建用戶pojo對象
這里直接實現SpringSecurity的用戶對象接口,并添加角色集合私有屬性。注意接口屬性都要標記不參與json的處理
@Data
public class SysRole implements GrantedAuthority {
private Integer id;
private String roleName;
private String roleDesc;
}創建角色pojo對象
這里直接使用SpringSecurity的角色規范,我們實現UserDetails的類型
@Data
public class SysUser implements UserDetails {
private Integer id;
private String username;
private String password;
private Integer status;
private List<SysRole> roles;
@JsonIgnore
@Override
public Collection<? extends GrantedAuthority> getAuthorities() {
return roles;
}
@Override
public String getPassword() {
return password;
}
@Override
public String getUsername() {
return username;
}
@JsonIgnore
@Override
public boolean isAccountNonExpired() {
return true;
}
@JsonIgnore
@Override
public boolean isAccountNonLocked() {
return true;
}
@JsonIgnore
@Override
public boolean isCredentialsNonExpired() {
return true;
}
@JsonIgnore
@Override
public boolean isEnabled() {
return true;
}
}提供角色mapper接口
public interface RoleMapper extends Mapper<SysRole> {
@Select("SELECT r.id, r.role_name roleName, r.role_desc roleDesc " +
"FROM sys_role r, sys_user_role ur " +
"WHERE r.id=ur.rid AND ur.uid=#{uid}")
public List<SysRole> findByUid(Integer uid);
}提供用戶mapper接口
這里就用到了Mybatis的一對多進行操作
public interface UserMapper extends Mapper<SysUser> {
@Select("select * from sys_user where username = #{username}")
@Results({
@Result(id = true, property = "id", column = "id"),
@Result(property = "roles", column = "id", javaType = List.class,
many = @Many(select = "com.itheima.mapper.RoleMapper.findByUid"))
})
public SysUser findByName(String username);
}提供認證service接口
@Service
@Transactional
public class UserServiceImpl implements UserService {
@Autowired
private UserMapper userMapper;
@Override
public UserDetails loadUserByUsername(String s) throws UsernameNotFoundException {
return userMapper.findByUsername(s);
}
}在啟動類中把加密對象放入IOC容器
@SpringBootApplication
@MapperScan("com.itheima.mapper")
public class SecurityApplication {
public static void main(String[] args) {
SpringApplication.run(SecurityApplication.class, args);
}
@Bean
public BCryptPasswordEncoder passwordEncoder(){
return new BCryptPasswordEncoder();
}
}修改配置類
@Configuration
@EnableWebSecurity
@EnableGlobalMethodSecurity(securedEnabled=true)
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {
@Autowired
private UserService userService;
@Bean
public BCryptPasswordEncoder passwordEncoder(){
return new BCryptPasswordEncoder();
}
//指定認證對象的來源
public void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.userDetailsService(userService).passwordEncoder(passwordEncoder());
}
//SpringSecurity配置信息
public void configure(HttpSecurity http) throws Exception {
http.authorizeRequests()
.antMatchers("/login.jsp", "failer.jsp", "/css/**", "/img/**", "/plugins/**").permitAll()
.antMatchers("/product").hasAnyRole("USER")
.anyRequest().authenticated()
.and()
.formLogin()
.loginPage("/login.jsp")
.loginProcessingUrl("/login")
.successForwardUrl("/index.jsp")
.failureForwardUrl("/failer.jsp")
.and()
.logout()
.logoutSuccessUrl("/logout")
.invalidateHttpSession(true)
.logoutSuccessUrl("/login.jsp")
.and()
.csrf()
.disable();
}
}大功告成盡管測試,注意還是用插件啟動項目,使用數據庫表中的用戶名和密碼。
整合實現授權功能
在啟動類上添加開啟方法級的授權注解

在產品處理器類上添加注解
要求產品列表功能必須具有ROLE_ADMIN角色才能訪問!

重啟項目測試
再次訪問產品列表發現權限不足

指定自定義異常頁面
編寫異常處理器攔截403異常
@ControllerAdvice
public class HandleControllerException {
@ExceptionHandler(RuntimeException.class)
public String exceptionHandler(RuntimeException e){
if(e instanceof AccessDeniedException){
//如果是權限不足異常,則跳轉到權限不足頁面!
return "redirect:/403.jsp";
}
//其余的異常都到500頁面!
return "redirect:/500.jsp";
}
}再次測試產品列表就可以到自定義異常頁面了

到此這篇關于SpringSecurity在單機環境下使用的文章就介紹到這了,更多相關SpringSecurity單機環境使用內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
- SpringSecurity在分布式環境下的使用流程分析
- SpringSecurity實現動態權限校驗的過程
- SpringBoot3.x接入Security6.x實現JWT認證的完整步驟
- SpringSecurity安全框架的使用
- Spring?Clou整合?Security?+?Oauth2?+?jwt實現權限認證的詳細過程
- Spring Security的持久化用戶和授權實現方式
相關文章
學會在Java中使用Optional功能
這篇文章主要介紹了學會在Java中使用Optional功能,在本文中,我們將了解如何、何時以及在哪里最好地應用Optional,具體相關內容需要的朋友可以參考下面文章內容2022-09-09
調用java.lang.Runtime.exec的正確姿勢分享
這篇文章主要介紹了調用java.lang.Runtime.exec的正確姿勢,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-11-11
springboot2?使用activiti6?idea插件的過程詳解
這篇文章主要介紹了springboot2?使用activiti6?idea插件,本文通過截圖實例代碼相結合給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2022-03-03
Struts 2 數據校驗功能及校驗問題的解決方案
這篇文章主要介紹了Struts 2 數據校驗功能及校驗問題的解決方案的相關資料,需要的朋友可以參考下2016-09-09
解決idea2020.1找不到程序包和符號的問題
這篇文章主要介紹了解決idea2020.1找不到程序包和符號的問題,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-01-01
SpringBoot創建自定義Starter代碼實例
這篇文章主要介紹了SpringBoot創建自定義Starter代碼實例,自定義 Starter 是一種在軟件開發中常用的技術,它可以幫助開發者快速搭建項目的基礎框架和配置,可以將一些常用的功能、依賴和配置封裝成一個可復用的模塊,方便在不同的項目中使用,需要的朋友可以參考下2023-11-11
java封裝空值建議使用Optional替代null的方法示例解析
這篇文章主要為大家介紹了java封裝空值建議使用Optional替代null的方法原理解析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-11-11

