public static void main(String[] args) {
        System.out.println("main 線程開始執行！");
        CountDownLatch latch = new CountDownLatch(5);//初始化同步數
        for (int i = 0; i < 5; i++) {
            int threadId = i+1;
            new Thread(()->{
                System.out.println("線程"+threadId+"執行！");
                latch.countDown();
            }).start();//java8 lamda表達式
        }
        System.out.println("即將被阻塞！");
        try {
            latch.await();//阻塞主線程,等待子線程將state減至0被喚醒
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
        System.out.println("main 線程執行完畢！");
    }

 /**
  * CountDownLatch唯一的構造函數,實例化時只能使用指定同步數的構造方法
  */
  public CountDownLatch(int count) {
      if (count < 0) throw new IllegalArgumentException("count < 0");
      this.sync = new Sync(count);//利用內部類(繼承AQS)對state進行設置初始化大小
  }

public void await() throws InterruptedException {
    //核心成員變量sync調用AQS中的方法acquireSharedInterruptibly
    sync.acquireSharedInterruptibly(1);
}

  public final void acquireSharedInterruptibly(int arg)
              throws InterruptedException {
      if (Thread.interrupted())//判斷是否有中斷標志
          throw new InterruptedException();
          /**
          * 該方法是由子類重寫,AQS強制其子類重寫,否則報錯
          * 根據if中的值判斷是否需要阻塞操作 1代表不需要阻塞 -1代表需要阻塞
          */
      if (tryAcquireShared(arg) < 0)
          doAcquireSharedInterruptibly(arg);//調用AQS共享鎖阻塞操作
  }

/**
 * 獲取同步數并判斷是否需要喚醒
 * 同步數state為0,則需要喚醒返回1即不需要阻塞
 * 同步數state不為1,則不需要喚醒,返回-1后的操作即阻塞
 */
 protected int tryAcquireShared(int acquires) {
     return (getState() == 0) ? 1 : -1;//獲取AQS中的state進行返回是否需要進行阻塞操作
 }

//以共享鎖的方式進行阻塞
private void doAcquireSharedInterruptibly(int arg)
    throws InterruptedException {
    /**
    * addWaiter方法主要是基于當前線程創建一個等待著并入隊且會創建一個哨兵節點
    * addWaiter具體細節和其內部enq初始化隊列方法請轉入AQS分析
    */
    final Node node = addWaiter(Node.SHARED);//以共享鎖創建一個等待者node
    boolean failed = true;
    try {
        for (;;) {//自旋,是否需要阻塞
            final Node p = node.predecessor();//當前線程的前繼節點
            if (p == head) {//前繼節點是否為頭節點
                int r = tryAcquireShared(arg);//嘗試獲取共享鎖即是否需要阻塞1和-1值
                if (r >= 0) {//當其大于等于時,r值只能時1或者-1,滿足該條件時則說明不需要阻塞
                    setHeadAndPropagate(node, r);//設置新的頭結點并釋放共享鎖
                    p.next = null; // help GC
                    failed = false;
                    return;
                }
            }
            /**
            * shouldParkAfterFailedAcquire主要是改變前節點的等待信號量
            * parkAndCheckInterrupt在前者返回TRUE的情況下會直接調用LockSupport.park()進行阻塞
            * 上述兩種方法在AQS分析中可找到詳細解釋
            */
            if (shouldParkAfterFailedAcquire(p, node) &&
                parkAndCheckInterrupt())
                throw new InterruptedException();//上述兩個條件滿足則代表線程被中斷過
        }
    } finally {
        if (failed)//出現異常且未執行for循環中改變?cè)揻ailed值
            cancelAcquire(node);//取消超時節點和當前節點取消喚醒,AQS原理分析中詳細講解
    }
}

//用于子線程調用將同步數-1
public void countDown() {
    sync.releaseShared(1);//通過內部成員變量sync調用內部Sync類繼承AQS中的釋放方法
}

public final boolean releaseShared(int arg) {
    if (tryReleaseShared(arg)) {//AQS類中定義強制子類重寫該方法,用于是否需要喚醒被阻塞的線程
        doReleaseShared();//滿足判斷條件則進行正常釋放
        return true;//釋放成功
    }
    return false;//不需要釋放
}

/**
* 主要利用自旋鎖的原理,對state值進行-1
*/
protected boolean tryReleaseShared(int releases) {
    for (;;) {
        int c = getState();//獲取state值
        if (c == 0)//還未開始自減,已為0則代表不能正常釋放
            return false;
        int nextc = c-1;
        if (compareAndSetState(c, nextc))//CAS對state值進行設置新的值
            return nextc == 0;//計數器是否為0,此狀態為0代表可以正常釋放
    }
}

/**
 * 釋放共享鎖
 */
private void doReleaseShared() {
    for (;;) {//自旋
        Node h = head;//頭節點
        if (h != null && h != tail) {//代表可喚醒且不是尾結點
            int ws = h.waitStatus;
            if (ws == Node.SIGNAL) {//頭節點的等待狀態為喚醒信號量
                if (!compareAndSetWaitStatus(h, Node.SIGNAL, 0))
                    continue;            // loop to recheck cases
                unparkSuccessor(h);//if中cas操作成功,則執行該喚醒方法,否則進行自旋或者結束
            }else if (ws == 0 &&//初始化但未被改變時
                     !compareAndSetWaitStatus(h, 0, Node.PROPAGATE))//設置為無條件喚醒
                continue;// loop on failed CAS 該else if中CAS失敗進行自旋
        }
        if (h == head)//loop if head changed 循環判定頭結點是否發生變化,實際上是喚醒后會執行這里結束自旋
            break;
    }
}

/**
* (1)對信號量節點即前繼節點等待值還原
* (2)對于node節點的后繼節點不為null直接喚醒或從后往前找尋信號量最靠前的線程進行喚醒
*/
private void unparkSuccessor(Node node) {
    int ws = node.waitStatus;//該節點等待狀態即頭結點的信號量
    if (ws < 0)
        compareAndSetWaitStatus(node, ws, 0);//將該節點的狀態值設置為0即初始值
    Node s = node.next;//獲取喚醒節點即node的下一節點
    if (s == null || s.waitStatus > 0) {
        s = null;
        for (Node t = tail; t != null && t != node; t = t.prev)//從后往前查找最靠前的信號量node
            if (t.waitStatus <= 0)//信號量或初始化值
                s = t;
    }
    if (s != null)//找到喚醒節點
        LockSupport.unpark(s.thread);對該線程進行喚醒
}