Opencv實現鼠標事件與窗口互動功能過程
更新時間：2022年12月07日 11:52:37 作者：明月醉窗臺
平時在做圖像處理demo或者研究測試算法時，經常會用到imshow和鼠標的交互，比如在顯示圖像的窗口上畫點、線、圓、矩形、多邊形等操作，故在此做出用法總結
1.opencv API及參數介紹
cv::setMouseCallback(const string& windowname, MouseCallback onMouse, void* userdata=0)
{
....
}
// windowname: 要操作的窗口名稱
// onMouse: 鼠標事件函數，鼠標事件發生以后，要執行的回調函數。函數原型是
// void onMouse(int event, int x, int y, int flags, void * para)
// userdata: 回調函數的參數
鼠標回調函數介紹：
void onMouse(int event, int x, int y, int flags, void *para) // int event: 鼠標事件，見后續說明 // x, y 是鼠標在圖像坐標系中的坐標 // flags : // para： 是用戶傳遞到回調函數中的參數
截取感興趣區域ROI：
cv::selectROIs("MultiTracker", frame, bboxes_, showCrosshair, fromCenter);
// “MultiTracker” : windowsName
// frame: 當前畫面；格式為cv::Mat
// bboxes： 要存儲的框框格式為：std::vector<cv::Rect>
// showCrosshair:默認為True
// fromCenter:從中心點還是從對角點，默認為false，為true時，選框從中心點開始
涉及的相關參數：
// EVENT的參數定義
enum
{
CV_EVENT_MOUSEMOVE =0,//滑動
CV_EVENT_LBUTTONDOWN =1,//左鍵點擊
CV_EVENT_RBUTTONDOWN =2,//右鍵點擊
CV_EVENT_MBUTTONDOWN =3,//中鍵點擊
CV_EVENT_LBUTTONUP =4,//左鍵放開
CV_EVENT_RBUTTONUP =5,//右鍵放開
CV_EVENT_MBUTTONUP =6,//中鍵放開
CV_EVENT_LBUTTONDBLCLK =7,//左鍵雙擊
CV_EVENT_RBUTTONDBLCLK =8,//右鍵雙擊
CV_EVENT_MBUTTONDBLCLK =9//中鍵雙擊
};
enum
{
CV_EVENT_FLAG_LBUTTON =1,//左鍵拖拽
CV_EVENT_FLAG_RBUTTON =2,//右鍵拖拽
CV_EVENT_FLAG_MBUTTON =4,//中鍵拖拽
CV_EVENT_FLAG_CTRLKEY =8,//按CTRL不放
CV_EVENT_FLAG_SHIFTKEY =16,//按SHIFT不放
CV_EVENT_FLAG_ALTKEY =32//按ALT不放
};
或者python-opencv中的參數也相同：
# mouse callback function
def mouse_event(event, x, y, flags, param):
'''
:param event: 點擊事件標識
:param x: 坐標x
:param y: 坐標y
:param flags:按鍵事件標識
:param param: 攜帶參數
:return:
'''
if flags == cv2.EVENT_FLAG_ALTKEY:
print('摁住Alt')
if flags == cv2.EVENT_FLAG_CTRLKEY:
print('摁住Ctrl')
if flags == cv2.EVENT_FLAG_SHIFTKEY:
print('摁住Shift')
if flags == cv2.EVENT_FLAG_LBUTTON:
print('摁住左鍵')
if flags == cv2.EVENT_FLAG_MBUTTON:
print('摁住中鍵')
if flags == cv2.EVENT_FLAG_RBUTTON:
print('摁住右鍵')
if event == cv2.EVENT_LBUTTONDBLCLK:
print('左鍵雙擊')
if event == cv2.EVENT_MBUTTONDBLCLK:
print('中鍵雙擊')
if event == cv2.EVENT_RBUTTONDBLCLK:
print('右鍵雙擊')
if event == cv2.EVENT_LBUTTONDOWN:
print('左鍵擊下')
if event == cv2.EVENT_LBUTTONUP:
print('左鍵彈起')
if event == cv2.EVENT_MBUTTONDOWN:
print('中鍵擊下')
if event == cv2.EVENT_MBUTTONUP:
print('中鍵彈起')
if event == cv2.EVENT_RBUTTONDOWN:
print('右鍵擊下')
if event == cv2.EVENT_RBUTTONUP:
print('右鍵彈起')
if event == cv2.EVENT_MOUSEWHEEL:
if flags > 0:
print('向前滾動')
else:
print('向后滾動')
if event == cv2.EVENT_MOUSEHWHEEL:
if flags > 0:
print('向左滾動') # 按住Alt
else:
print('向右滾動')
if __name__ == '__main__':
img = np.mat(np.zeros((300, 300, 3), np.uint8)) # 構造一個像素值全為1的圖形
cv2.namedWindow('mouse') #命名窗口為mouse
cv2.setMouseCallback('mouse', mouse_event) # 窗口與回調函數綁定
while True:
cv2.imshow('mouse', img)
if cv2.waitKey(1) & 0xFF == ord('q'): # 摁下q退出
break
cv2.destroyAllWindows() #銷毀所有窗口
2.一個可以繪制矩形和控制縮放的demo
#include <opencv2/opencv.hpp>
using namespace std;
using namespace cv;
#define WINNAME "畫板"
struct MouseParam
{
Mat img; //用于畫好一個后顯示
Mat imgZoomBackup; //用于zoom的還原備份
Mat imgTmp; //用于實時顯示
Mat imgBackup; //清空，顯示最初的圖
Point pt1;
Point pt2;
bool mouseLflag;
float scale;
};
//繪制矩形
void draw_rectangle(Mat& img, const Point& pt1, const Point& pt2)
{
rectangle(img, pt1, pt2, Scalar(0, 255, 0), 1, 0, 0);
}
//繪制十字線：即過一點的水平、豎直線
void draw_crossline(Mat& img, const Point& pt)
{
int width = img.cols;
int height = img.rows;
cv::Point ptv1;
cv::Point ptv2;
cv::Point pth1;
cv::Point pth2;
ptv1 = cv::Point(pt.x, 0);
ptv2 = cv::Point(pt.x, height);
pth1 = cv::Point(0, pt.y);
pth2 = cv::Point(width, pt.y);
cv::line(img, ptv1, ptv2, Scalar(255, 255, 0), 1);
cv::line(img, pth1, pth2, Scalar(255, 255, 0), 1);
}
/*
* func:實現圖像繞某一點進行縮放功能
*/
void zoom(Mat& img, const Mat& srcimg, const Point& pt, const float scale)
{
int x1, y1, x2, y2;
int width, height;
width = (int)(srcimg.cols * scale / 2.0);
height = (int)(srcimg.rows * scale / 2.0);
x1 = max(pt.x - width, 0);
y1 = max(pt.y - height, 0);
x2 = min(pt.x + width, srcimg.cols);
y2 = min(pt.y + height, srcimg.rows);
Rect zoomRect(Point(x1, y1), Point(x2, y2));
img = srcimg(zoomRect).clone();
}
void on_mouse(int event, int x, int y, int flags, void* param)
{
MouseParam* par = (MouseParam*)param;
Point pt(x, y);
double value;
float step = 0.05;
if (event == EVENT_RBUTTONDOWN) //按下右鍵，重畫
{
par->img = par->imgBackup.clone();
}
else if (event == EVENT_LBUTTONDOWN) //按下左鍵
{
par->pt1 = pt;
par->pt2 = pt;
par->mouseLflag = true;
}
else if (event == EVENT_MOUSEMOVE && flags == EVENT_FLAG_LBUTTON) //按下左鍵并移動
{
par->pt2 = pt;
}
else if (event == EVENT_LBUTTONUP)//左鍵放開進行繪制矩形框
{
par->pt2 = pt;
draw_rectangle(par->img, par->pt1, par->pt2);
//par->imgZoomBackup = par->img.clone();
par->mouseLflag = false;
}
else if (event == EVENT_MOUSEMOVE) //鼠標移動將顯示十字線
{
par->pt1 = pt;
}
else if (event == EVENT_MOUSEWHEEL) //鼠標滾動
{
value = getMouseWheelDelta(flags);
if (value > 0) //滾輪向前滾動，設為縮小
par->scale += step;
else if (value < 0) //鼠標向后滾動，設為放大
par->scale -= step;
par->scale = max((float)0.3, par->scale);
par->scale = min((float)1.0, par->scale);
zoom(par->img, par->imgZoomBackup, par->pt1, par->scale);
}
}
int main()
{
//Mat img(512, 512, CV_8UC3, Scalar::all(255));
Mat img = imread("./imgs/1/L.png");
MouseParam mouseParam;
mouseParam.img = img.clone();
mouseParam.imgBackup = img.clone();
mouseParam.imgZoomBackup = img.clone();
mouseParam.mouseLflag = false;
float step = 0.05;
mouseParam.scale = 1.0;
namedWindow(WINNAME, 0);
setMouseCallback(WINNAME, on_mouse, &mouseParam);
int key;
while (1)
{
mouseParam.imgTmp = mouseParam.img.clone();
draw_crossline(mouseParam.imgTmp, mouseParam.pt1);
if (mouseParam.mouseLflag == true)
draw_rectangle(mouseParam.imgTmp, mouseParam.pt1, mouseParam.pt2);
imshow(WINNAME, mouseParam.imgTmp);
key = waitKey(40);
if (key == 27)
{
break;
}
else if (key == toascii('q'))
{
mouseParam.scale -= step;
zoom(mouseParam.img, mouseParam.imgZoomBackup, mouseParam.pt1, mouseParam.scale);
}
else if (key == toascii('e'))
{
mouseParam.scale += step;
zoom(mouseParam.img, mouseParam.imgZoomBackup, mouseParam.pt1, mouseParam.scale);
}
}
return 0;
}3.圖象中畫點
- 對于拼接后的圖像顯示窗口，依次繪制左右圖中的對應點程序
- 右鍵刪除尚未調通
std::vector<cv::Point2f>pointsL; //依次存放左右圖中的對應點
std::vector<cv::Point2f>pointsR;
cv::Mat mask;
cv::Point2f p_;
//鼠標回調函數
void on_mouse(int event, int x, int y, int flags, void* param)
{
float cols = mask.cols/2;
int rad = 6;
if (event == cv::EVENT_LBUTTONUP || !(flags & cv::EVENT_FLAG_LBUTTON))
cv::Point2f pt = cv::Point2f(-10, -10);
else if (event == cv::EVENT_LBUTTONDOWN)
{
cv::Point2f pt(x, y);
if (pt.x>=0&&pt.x <= cols)
{
pointsL.push_back(pt);
cv::circle(mask, pt, rad, cv::Scalar(0, 255, 0), 2);
}
else {
pointsR.push_back(pt);
cv::circle(mask, pt, rad, cv::Scalar(0, 0, 255), 2);
}
//cv::circle(mask, pt, 2, cv::Scalar(0, 255, 0), 2);
cv::imshow("image", mask);
}
else if (event == cv::EVENT_RBUTTONDOWN) //按下右鍵，重畫
{
cv::Point2f pt(x, y);
if (pointsL.size()>0)
{
pointsL.pop_back();
}
else if (pointsR.size() > 0)
{
pointsR.pop_back();
}
}
std::cout << "pointsL" << std::endl;
for (int i = 0; i < pointsL.size(); ++i)
{
std::cout << pointsL[i] << std::endl;
}
std::cout << "pointsR" << std::endl;
for (int i = 0; i < pointsR.size(); ++i)
{
std::cout << pointsR[i] << std::endl;
}
}4.opencv例程分水嶺分割中的界面應用
鼠標時間包含繪制直線的交互操作
static void help(char** argv)
{
cout << "\nThis program demonstrates the famous watershed segmentation algorithm in OpenCV: watershed()\n"
"Usage:\n" << argv[0] << " [image_name -- default is fruits.jpg]\n" << endl;
cout << "Hot keys: \n"
"\tESC - quit the program\n"
"\tr - restore the original image\n"
"\tw or SPACE - run watershed segmentation algorithm\n"
"\t\t(before running it, *roughly* mark the areas to segment on the image)\n"
"\t (before that, roughly outline several markers on the image)\n";
}
Mat markerMask, img;
Point prevPt(-1, -1);
static void onMouse(int event, int x, int y, int flags, void*)
{
if (x < 0 || x >= img.cols || y < 0 || y >= img.rows)
return;
if (event == EVENT_LBUTTONUP || !(flags & EVENT_FLAG_LBUTTON))
prevPt = Point(-1, -1);
else if (event == EVENT_LBUTTONDOWN)
prevPt = Point(x, y);
else if (event == EVENT_MOUSEMOVE && (flags & EVENT_FLAG_LBUTTON))
{
Point pt(x, y);
if (prevPt.x < 0)
prevPt = pt;
line(markerMask, prevPt, pt, Scalar(12,234,12), 40, 8, 0);
line(img, prevPt, pt, Scalar(12,234,12), 40, 8, 0);
prevPt = pt;
imshow("image", img);
}
}
int main(int argc, char** argv)
{
cv::CommandLineParser parser(argc, argv, "{help h | | }{ @input | fruits.jpg | }");
if (parser.has("help"))
{
help(argv);
return 0;
}
//string filename = samples::findFile(parser.get<string>("@input"));
Mat img0 = imread("..."), imgGray;
if (img0.empty())
{
cout << "Couldn't open image ";
help(argv);
return 0;
}
help(argv);
//img0 = img0(Rect(1000, 1000, 800, 800));
namedWindow("image", WINDOW_NORMAL);
img0.copyTo(img);
cvtColor(img, markerMask, COLOR_BGR2GRAY);
cvtColor(markerMask, imgGray, COLOR_GRAY2BGR);
markerMask = Scalar::all(0);
imshow("image", img);
setMouseCallback("image", onMouse, 0);
for (;;)
{
char c = (char)waitKey(0);
if (c == 27)
break;
if (c == 'r')
{
markerMask = Scalar::all(0);
img0.copyTo(img);
namedWindow("image", WINDOW_NORMAL);
imshow("image", img);
}
if (c == 'w' || c == ' ')
{
//對繪制完成的圖像進行下一步操作
//須在鍵入相應按鍵后執行
}
}
return 0;
}到此這篇關于Opencv實現鼠標事件與窗口互動功能過程的文章就介紹到這了,更多相關Opencv鼠標事件與窗口互動內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Python中byte字符串轉string的實現
本文主要介紹了Python中byte字符串轉string的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-07-07
python打印9宮格、25宮格等奇數格 滿足橫豎斜相加和相等
這篇文章主要為大家詳細介紹了python打印9宮格、25宮格等奇數格，滿足橫豎斜相加和相等，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-07-07
Python實現刪除重復視頻文件的方法詳解
這篇文章主要為大家詳細介紹了如何利用Python實現刪除重復視頻文件功能，文中的示例代碼講解詳細，對我們學習Python有一定幫助，需要的可以參考一下2022-10-10
Python報錯之如何解決matplotlib繪圖中文顯示成框框問題
這篇文章主要介紹了Python報錯之如何解決matplotlib繪圖中文顯示成框框問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2023-09-09
pycharm開發一個簡單界面和通用mvc模板(操作方法圖解)
這篇文章主要介紹了pycharm開發最簡單的界面和通用mvc模板的方法，本文通過圖文并茂的形式給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-05-05
為了順利買到演唱會的票用Python制作了自動搶票的腳本
大麥網，是中國綜合類現場娛樂票務營銷平臺，業務覆蓋演唱會、 話劇、音樂劇、體育賽事等領域。但是因?yàn)槠睌?shù)有限，還有黃牛們不能丟了飯碗，所以導致了，很多人都搶不到票，那么，今天帶大家用Python來制作一個自動搶票的腳本小程序2021-10-10
Python 能做很多無聊，但有意思的事情。本文為大家精心準備了五個整蠱朋友的小程序，文中的示例代碼講解詳細，感興趣的小伙伴快動手試一試2022-04-04
這篇文章主要介紹了詳解pytorch 0.4.0遷移指南，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2019-06-06
這篇文章主要為大家介紹了Djanog admin 顯示圖片及觸發器講解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2023-06-06
這篇文章主要介紹了python跨文件使用全局變量的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-11-11