var thread: Thread?
var isStopped: Bool = false
func createLiveThread() {
		thread = Thread.init(block: { [weak self] in
				guard let self = self else { return }
				let port = NSMachPort.init()
        RunLoop.current.add(port, forMode: .default)
				while !self.isStopped {
		        RunLoop.current.run(mode: .default, before: Date.distantFuture)
        }
		})
		thread?.start()
}
func stop() {
		self.perform(#selector(self.stopThread), on: thread!, with: nil, waitUntilDone: false)
}
@objc func stopThread() {
		self.isStopped = true
		RunLoop.current.run(mode: .default, before: Date.init())
    self.thread = nil
}

**public func CFRunLoopRemoveSource(_ rl: CFRunLoop!, _ source: CFRunLoopSource!, _ mode: CFRunLoopMode!)
public func CFRunLoopRemoveObserver(_ rl: CFRunLoop!, _ observer: CFRunLoopObserver!, _ mode: CFRunLoopMode!)
public func CFRunLoopRemoveTimer(_ rl: CFRunLoop!, _ timer: CFRunLoopTimer!, _ mode: CFRunLoopMode!)**

func setupImageView() {
		self.performSelector(onMainThread: #selector(self.setupImage), 
												 with: nil, 
												 waitUntilDone: false,
												 modes: [RunLoop.Mode.default.rawValue])
}
@objc func setupImage() {
		imageView.setImage()
}

// 抽象的超類，用來充當其它對象的一個替身
// Timer/CADisplayLink可以使用NSProxy做消息轉發，可以避免循環引用
// swift中我們是沒發使用NSInvocation的，所以我們直接使用NSobject來做消息轉發
class WeakProxy: NSObject {
    private weak var target: NSObjectProtocol?
    init(target: NSObjectProtocol) {
        self.target = target
        super.init()
    }
    override func responds(to aSelector: Selector!) -> Bool {
        return (target?.responds(to: aSelector) ?? false) || super.responds(to: aSelector)
    }
    override func forwardingTarget(for aSelector: Selector!) -> Any? {
        return target
    }
}
class FPSLabel: UILabel {
    var link: CADisplayLink!
    var count: Int = 0
    var lastTime: TimeInterval = 0.0
    fileprivate let defaultSize = CGSize.init(width: 80, height: 20)
    override init(frame: CGRect) {
        super.init(frame: frame)
        if frame.size.width == 0 || frame.size.height == 0 {
            self.frame.size = defaultSize
        }
        layer.cornerRadius = 5.0
        clipsToBounds = true
        textAlignment = .center
        isUserInteractionEnabled = false
        backgroundColor = UIColor.white.withAlphaComponent(0.7)
        link = CADisplayLink.init(target: WeakProxy.init(target: self), selector: #selector(FPSLabel.tick(link:)))
        link.add(to: RunLoop.main, forMode: .common)
    }
    required init?(coder: NSCoder) {
        fatalError("init(coder:) has not been implemented")
    }
    deinit {
        link.invalidate()
    }
    @objc func tick(link: CADisplayLink) {
        guard lastTime != 0 else {
            lastTime = link.timestamp
            return
        }
        count += 1
        let timeDuration = link.timestamp - lastTime
        // 1、設置刷新的時間: 這里是設置為1秒（即每秒刷新）
        guard timeDuration >= 1.0 else { return }
        // 2、計算當前的FPS
        let fps = Double(count)/timeDuration
        count = 0
        lastTime = link.timestamp
        // 3、開始設置FPS了
        let progress = fps/60.0
        let color = UIColor(hue: CGFloat(0.27 * (progress - 0.2)), saturation: 1, brightness: 0.9, alpha: 1)
        self.text = "\(Int(round(fps))) FPS"
        self.textColor = color
    }
}

class PingMonitor {
    static let timeoutInterval: TimeInterval = 0.2
    static let queueIdentifier: String = "com.queue.PingMonitor"
    private var queue: DispatchQueue = DispatchQueue.init(label: queueIdentifier)
    private var isMonitor: Bool = false
    private var semphore: DispatchSemaphore = DispatchSemaphore.init(value: 0)
    func startMonitor() {
        guard isMonitor == false else { return }
        isMonitor = true
        queue.async {
            while self.isMonitor {
                var timeout = true
                DispatchQueue.main.async {
                    timeout = false
                    self.semphore.signal()
                }
                Thread.sleep(forTimeInterval:PingMonitor.timeoutInterval)
                // 說明等了timeoutInterval之后，主線程依然沒有執行派發的任務，這里就認為它是處于卡頓的
                if timeout == true {
                    //TODO: 這里需要取出崩潰方法棧中的符號來判斷為什么出現了卡頓
                    // 可以使用微軟的框架:PLCrashReporter
                }
                self.semphore.wait()
            }
        }
    }
}

class RunLoopMonitor {
    private init() {}
    static let shared: RunLoopMonitor = RunLoopMonitor.init()
    var timeoutCount = 0
    var runloopObserver: CFRunLoopObserver?
    var runLoopActivity: CFRunLoopActivity?
    var dispatchSemaphore: DispatchSemaphore?
    // 原理：進入睡眠前方法的執行時間過長導致無法進入睡眠，或者線程喚醒之后，一直沒進入下一步
    func beginMonitor() {
        let uptr = Unmanaged.passRetained(self).toOpaque()
        let vptr = UnsafeMutableRawPointer(uptr)
        var context = CFRunLoopObserverContext.init(version: 0, info: vptr, retain: nil, release: nil, copyDescription: nil)
        runloopObserver = CFRunLoopObserverCreate(kCFAllocatorDefault,
                                                  CFRunLoopActivity.allActivities.rawValue,
                                                  true,
                                                  0,
                                                  observerCallBack(),
                                                  &context)
        CFRunLoopAddObserver(CFRunLoopGetMain(), runloopObserver, .commonModes)
        // 初始化的信號量為0
        dispatchSemaphore = DispatchSemaphore.init(value: 0)
        DispatchQueue.global().async {
            while true {
                // 方案一：可以通過設置單次超時時間來判斷 比如250毫秒
								// 方案二：可以通過設置連續多次超時就是卡頓 戴銘在GCDFetchFeed中認為連續三次超時80秒就是卡頓
                let st = self.dispatchSemaphore?.wait(timeout: DispatchTime.now() + .milliseconds(80))
                if st == .timedOut {
                    guard self.runloopObserver != nil else {
                        self.dispatchSemaphore = nil
                        self.runLoopActivity = nil
												self.timeoutCount = 0
                        return
                    }
                    if self.runLoopActivity == .afterWaiting || self.runLoopActivity == .beforeSources {
												self.timeoutCount += 1
                        if self.timeoutCount < 3 { continue }
                        DispatchQueue.global().async {
                            let config = PLCrashReporterConfig.init(signalHandlerType: .BSD, symbolicationStrategy: .all)
                            guard let crashReporter = PLCrashReporter.init(configuration: config) else { return }
                            let data = crashReporter.generateLiveReport()
                            do {
                                let reporter = try PLCrashReport.init(data: data)
                                let report = PLCrashReportTextFormatter.stringValue(for: reporter, with: PLCrashReportTextFormatiOS) ?? ""
                                NSLog("------------卡頓時方法棧:\n \(report)\n")
                            } catch _ {
                                NSLog("解析crash data錯誤")
                            }
                        }
                    }
                }
            }
        }
    }
    func end() {
        guard let _ = runloopObserver else { return }
        CFRunLoopRemoveObserver(CFRunLoopGetMain(), runloopObserver, .commonModes)
        runloopObserver = nil
    }
    private func observerCallBack() -> CFRunLoopObserverCallBack {
        return { (observer, activity, context) in
            let weakself = Unmanaged<RunLoopMonitor>.fromOpaque(context!).takeUnretainedValue()
            weakself.runLoopActivity = activity
            weakself.dispatchSemaphore?.signal()
        }
    }
}

let runloop = CFRunLoopGetCurrent()
guard let allModes = CFRunLoopCopyAllModes(runloop) as? [CFRunLoopMode] else {
    return
}
 while true {
	  for mode in allModes {
        CFRunLoopRunInMode(mode, 0.001, false)
    }
 }

- (void)startDisplayLink:(NSString *)scene {
    FPSInfo(@"startDisplayLink");
    m_displayLink = [CADisplayLink displayLinkWithTarget:self selector:@selector(onFrameCallback:)];
    [m_displayLink addToRunLoop:[NSRunLoop currentRunLoop] forMode:NSRunLoopCommonModes];
		...
}
- (void)onFrameCallback:(id)sender {
    // 當前時間: 單位為秒
    double nowTime = CFAbsoluteTimeGetCurrent();
    // 將單位轉化為毫秒
    double diff = (nowTime - m_lastTime) * 1000;
		// 1、如果時間間隔超過最大的幀間隔：那么此次屏幕刷新方法超時
    if (diff > self.pluginConfig.maxFrameInterval) {
        m_currRecorder.dumpTimeTotal += diff;
        m_dropTime += self.pluginConfig.maxFrameInterval * pow(diff / self.pluginConfig.maxFrameInterval, self.pluginConfig.powFactor);
        // 總超時時間超過閾值：展示超時信息
        if (m_currRecorder.dumpTimeTotal > self.pluginConfig.dumpInterval * self.pluginConfig.dumpMaxCount) {
            FPSInfo(@"diff %lf exceed, begin: %lf, end: %lf, scene: %@, you can see more detail in record id: %d",
                    m_currRecorder.dumpTimeTotal,
                    m_currRecorder.dumpTimeBegin,
                    m_currRecorder.dumpTimeBegin + m_currRecorder.dumpTimeTotal / 1000.0,
                    m_scene,
                    m_currRecorder.recordID);
						...... 
        }
		// 2、如果時間間隔沒有最大的幀間隔：那么此次屏幕刷新方法不超時
    } else {
        // 總超時時間超過閾值：展示超時信息
        if (m_currRecorder.dumpTimeTotal > self.pluginConfig.maxDumpTimestamp) {
            FPSInfo(@"diff %lf exceed, begin: %lf, end: %lf, scene: %@, you can see more detail in record id: %d",
                    m_currRecorder.dumpTimeTotal,
                    m_currRecorder.dumpTimeBegin,
                    m_currRecorder.dumpTimeBegin + m_currRecorder.dumpTimeTotal / 1000.0,
                    m_scene,
                    m_currRecorder.recordID);
						....
				// 總超時時間不超過閾值：將時間歸0 重新計數
        } else {
            m_currRecorder.dumpTimeTotal = 0;
            m_currRecorder.dumpTimeBegin = nowTime + 0.0001;
        }
    }
    m_lastTime = nowTime;
}