docker?machine安裝極狐gitlab的過程詳解
更新時間：2022年07月19日 09:49:52 作者：leffss
這篇文章主要介紹了docker?machine安裝極狐gitlab的相關知識，本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
1. 環境信息
1.1 主機信息
| 主機 | 用途 |
|---|---|
| 10.10.10.60 | 極狐gitlab |
1.2 配置信息
[root@localhost ~]# cat /etc/centos-release
CentOS Linux release 7.9.2009 (Core)
[root@localhost ~]#
[root@localhost ~]# uname -r
3.10.0-1160.el7.x86_64
[root@localhost ~]#
[root@localhost ~]# free -m
total used free shared buff/cache available
Mem: 8004 208 7482 8 313 7548
Swap: 3967 0 3967
[root@localhost ~]#
[root@localhost ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 141
Model name: 11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz
Stepping: 1
CPU MHz: 2304.002
BogoMIPS: 4608.00
Hypervisor vendor: VMware
Virtualization type: full
L1d cache: 48K
L1i cache: 32K
L2 cache: 1280K
L3 cache: 24576K
NUMA node0 CPU(s): 0,1
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology tsc_reliable nonstop_tsc eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 arat avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq movdiri movdir64b md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities
[root@localhost ~]# 1.3 環境初始化
echo "設置時鐘同步" yum install -y chrony systemctl start chronyd.service systemctl enable chronyd.service echo "關閉防火墻" systemctl stop firewalld systemctl disable firewalld echo "關閉 selinux" setenforce 0 sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config getenforce echo "優化 ssh 登錄速度" sed -i 's/#UseDNS yes/UseDNS no/g' /etc/ssh/sshd_config systemctl restart sshd echo "安裝基礎軟件 lrzsz, epel-release" yum install epel-release lrzsz -y
1.4 升級內核
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
# 安裝ELRepo
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
# 載入elrepo-kernel元數據
yum --disablerepo=\* --enablerepo=elrepo-kernel repolist
# 查看可用的rpm包
yum --disablerepo=\* --enablerepo=elrepo-kernel list kernel*
# 安裝長期支持版本的kernel
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt.x86_64
# 刪除舊版本工具包
yum remove kernel-tools-libs.x86_64 kernel-tools.x86_64 -y
# 安裝新版本工具包
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt-tools.x86_64
#查看默認啟動順序
awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg
#默認啟動的順序是從0開始，新內核是從頭插入（目前位置在0，而4.4.4的是在1），所以需要選擇0。
grub2-set-default 0
reboot當前最新穩定內核版本 CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)
1.5 安裝 docker
參考：Get Docker | Docker Documentation 或者
echo " net.ipv4.ip_forward = 1 net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1" >> /etc/sysctl.conf sysctl -p curl https://releases.rancher.com/install-docker/19.03.sh | sh systemctl enable docker
設置國內源
vi /etc/docker/daemon.json
{
"registry-mirrors": ["https://hccwwfjl.mirror.aliyuncs.com"]
}
systemctl restart docker其他源：http://hub-mirror.c.163.com，建議用這個 163 的
1.6 安裝 docker machine
參考：Testing Environment | GitLab
$ curl -L https://github.com/docker/machine/releases/download/v0.16.2/docker-machine-`uname -s`-`uname -m` >/usr/local/bin/docker-machine && \ chmod +x /usr/local/bin/docker-machine $ docker-machine version docker-machine version 0.16.2, build bd45ab13
2. 安裝極狐gitlab
參考官方文檔：Testing Environment | GitLab
2.1 獲取可用的極狐gitlab鏡像tags
$ curl https://version.gitlab.cn/api/v1/versions
[{"id":138,"version":"15.1.2","major":15,"minor":1,"created_at":"2022-07-18T08:56:08.077+08:00"},{"id":137,"version":"15.1.1","major":15,"minor":1,"created_at":"2022-07-04T21:40:13.500+08:00"},{"id":136,"version":"15.0.4","major":15,"minor":0,"created_at":"2022-07-04T20:49:12.275+08:00"},{"id":135,"version":"14.10.5","major":14,"minor":10,"created_at":"2022-07-04T20:48:53.544+08:00"},{"id":134,"version":"15.1.0","major":15,"minor":1,"created_at":"2022-06-29T08:48:24.417+08:00"},{"id":133,"version":"15.0.3","major":15,"minor":0,"created_at":"2022-06-21T11:34:56.890+08:00"},{"id":132,"version":"14.10.4","major":14,"minor":10,"created_at":"2022-06-09T00:38:44.427+08:00"},{"id":131,"version":"15.0.2","major":15,"minor":0,"created_at":"2022-06-09T00:38:35.091+08:00"},{"id":130,"version":"14.9.5","major":14,"minor":9,"created_at":"2022-06-09T00:38:25.486+08:00"},{"id":129,"version":"14.10.3","major":14,"minor":10,"created_at":"2022-06-09T00:38:20.119+08:00"},{"id":128,"version":"15.0.1","major":15,"minor":0,"created_at":"2022-06-09T00:37:57.686+08:00"},{"id":127,"version":"15.0.0","major":15,"minor":0,"created_at":"2022-05-30T14:47:01.074+08:00"},{"id":126,"version":"14.9.4","major":14,"minor":9,"created_at":"2022-05-16T10:20:15.342+08:00"},{"id":125,"version":"14.10.2","major":14,"minor":10,"created_at":"2022-05-16T10:20:05.693+08:00"},{"id":124,"version":"14.8.6","major":14,"minor":8,"created_at":"2022-05-11T09:38:30.199+08:00"},{"id":123,"version":"14.10.1","major":14,"minor":10,"created_at":"2022-05-11T09:38:25.259+08:00"},{"id":122,"version":"14.10.0","major":14,"minor":10,"created_at":"2022-04-28T10:55:42.550+08:00"},{"id":121,"version":"14.9.3","major":14,"minor":9,"created_at":"2022-04-15T15:27:32.220+08:00"},{"id":120,"version":"14.7.7","major":14,"minor":7,"created_at":"2022-04-07T23:33:06.372+08:00"},{"id":119,"version":"14.8.5","major":14,"minor":8,"created_at":"2022-04-07T20:10:25.222+08:00"},{"id":118,"version":"14.9.2","major":14,"minor":9,"created_at":"2022-04-07T18:05:01.894+08:00"},{"id":117,"version":"14.7.6","major":14,"minor":7,"created_at":"2022-04-01T11:05:38.177+08:00"},{"id":116,"version":"14.9.1","major":14,"minor":9,"created_at":"2022-03-30T15:02:25.234+08:00"},{"id":115,"version":"14.7.5","major":14,"minor":7,"created_at":"2022-03-30T07:06:00.278+08:00"},{"id":114,"version":"14.9.0","major":14,"minor":9,"created_at":"2022-03-28T15:14:45.356+08:00"}]2.2 設置環境變量
export SSH_PORT=2222 export HTTP_PORT=8888 export VERSION=15.1.2 export ENV_NAME=gitlab-test-env export CONTAINER_NAME=gitlab-test-14.7.3
2.3 創建 docker host
docker-machine create \ --virtualbox-cpu-count -1 \ --virtualbox-memory 4096 \ --virtualbox-disk-size 30000 \ --driver virtualbox $ENV_NAME
會出現以下報錯
Creating CA: /root/.docker/machine/certs/ca.pem Creating client certificate: /root/.docker/machine/certs/cert.pem Running pre-create checks... Error with pre-create check: "VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path"
原因是未安裝 VirtualBox，解決方法如下
Linux_Downloads – Oracle VM VirtualBox
wget https://download.virtualbox.org/virtualbox/6.1.32/VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm yum install -y VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm
必須使用 yum 安裝 rpm 包，以便解決依賴
再次運行 docker-machine 創建命令，出現以下報錯：
Running pre-create checks... Error with pre-create check: "We support Virtualbox starting with version 5. Your VirtualBox install is \"WARNING: The vboxdrv kernel module is not loaded. Either there is no module\\n available for the current kernel (5.4.180-1.el7.elrepo.x86_64) or it failed to\\n load. Please recompile the kernel module and install it by\\n\\n sudo /sbin/vboxconfig\\n\\n You will not be able to start VMs until this problem is fixed.\\n6.1.32r149290\". Please upgrade at https://www.virtualbox.org"
按照提示執行命令 /sbin/vboxconfig
$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the gcc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
This system is currently not set up to build kernel modules.
Please install the gcc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
There were problems setting up VirtualBox. To re-start the set-up process, run
/sbin/vboxconfig
as root. If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.
根據提示執行
yum install -y gcc make perl # 會提示找不到 kernel-devel-5.4.180-1.el7.elrepo.x86_64 yum install -y kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
原因是前面我們升級了內核到 5.4，內核太新了，重新使用默認 3.10 內核
#查看默認啟動順序
$ awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg
CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)
CentOS Linux (3.10.0-1160.el7.x86_64) 7 (Core)
CentOS Linux (0-rescue-5fe30f5d6bc041278a5ab7b332967cb0) 7 (Core)
#默認啟動的順序是從0開始，所以需要選擇1。
grub2-set-default 1
reboot重啟后執行 /sbin/vboxconfig
$ uname -r
3.10.0-1160.el7.x86_64
$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
There were problems setting up VirtualBox. To re-start the set-up process, run
/sbin/vboxconfig
as root. If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.根據提示執行
yum install -y kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
再執行 /sbin/vboxconfig
$ /sbin/vboxconfig vboxdrv.sh: Stopping VirtualBox services. vboxdrv.sh: Starting VirtualBox services. vboxdrv.sh: Building VirtualBox kernel modules.
成功編譯進內核
再次執行 docker-machine，還是報錯：
Running pre-create checks... Error with pre-create check: "This computer doesn't have VT-X/AMD-v enabled. Enabling it in the BIOS is mandatory"
原因是 vm 未開啟硬件虛擬化，關閉虛擬機，開啟即可
圖片此處省略
- 勾選
虛擬化 Intel VT-X/EPT 或 AMD-V/RVI(V)
重啟后再次運行 docker-machine，結果因?yàn)榫W(wǎng)絡原因下載鏡像失敗
Running pre-create checks... (gitlab-test-env) No default Boot2Docker ISO found locally, downloading the latest release... (gitlab-test-env) Latest release for github.com/boot2docker/boot2docker is v19.03.12 (gitlab-test-env) Downloading /root/.docker/machine/cache/boot2docker.iso from https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso... Error with pre-create check: "Get https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso: read tcp 10.10.10.60:38606->20.205.243.166:443: read: connection reset by peer"
解決方法很簡單，先在合適網絡下下載 https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso，然后把 boot2docker.iso 放到目錄 /root/.docker/machine/cache/ 下即可
再次運行 docker-machine
$ docker-machine create \ > --virtualbox-cpu-count -1 \ > --virtualbox-memory 4096 \ > --virtualbox-disk-size 30000 \ > --driver virtualbox $ENV_NAME Running pre-create checks... Creating machine... (gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso... (gitlab-test-env) Creating VirtualBox VM... (gitlab-test-env) Creating SSH key... (gitlab-test-env) Starting the VM... (gitlab-test-env) Check network to re-create if needed... (gitlab-test-env) Found a new host-only adapter: "vboxnet0" Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet0 --ip 192.168.99.1 --netmask 255.255.255.0 failed: VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available) VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp
解決方法如下：
1. docker-machine ls 的所有計算機
2. 用 docker-machine rm -y <machineName> 刪除它們
3. 用 VBoxManage list hostonlyifs 查找所有 host-only 以太網適配器
4. 用 VBoxManage hostonlyif remove <networkName> 逐個刪除它們
5. 創建 /etc/vbox 文件夾
6. 寫入文件 echo "* 0.0.0.0/0 ::/0" > /etc/vbox/networks.conf
這種解決方法可能會導致啟動 docker 機器時 Waiting for an IP...會花費多一點時間
再次創建 host，正常運行了
$ docker-machine create \ > --virtualbox-cpu-count -1 \ > --virtualbox-memory 4096 \ > --virtualbox-disk-size 30000 \ > --driver virtualbox $ENV_NAME Running pre-create checks... Creating machine... (gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso... (gitlab-test-env) Creating VirtualBox VM... (gitlab-test-env) Creating SSH key... (gitlab-test-env) Starting the VM... (gitlab-test-env) Check network to re-create if needed... (gitlab-test-env) Found a new host-only adapter: "vboxnet0" (gitlab-test-env) Waiting for an IP... Waiting for machine to be running, this may take a few minutes... Detecting operating system of created instance... Waiting for SSH to be available... Detecting the provisioner... Provisioning with boot2docker... Copying certs to the local machine directory... Copying certs to the remote machine... Setting Docker configuration on the remote daemon... Checking connection to Docker... Docker is up and running! To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env gitlab-test-env $ docker-machine ls NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS gitlab-test-env - virtualbox Running tcp://192.168.99.100:2376 v19.03.12
2.4 連接到 docker host
eval "$(docker-machine env ${ENV_NAME})"如果需要長期使用可以添加到配置文件：echo 'eval "$(docker-machine env gitlab-test-env)"' >> ~/.bash_profile
查看是否生效
docker info Client: Debug Mode: false Server: Containers: 0 Running: 0 Paused: 0 Stopped: 0 Images: 0 Server Version: 19.03.12 Storage Driver: overlay2 Backing Filesystem: extfs Supports d_type: true Native Overlay Diff: true Logging Driver: json-file Cgroup Driver: cgroupfs Plugins: Volume: local Network: bridge host ipvlan macvlan null overlay Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog Swarm: inactive Runtimes: runc Default Runtime: runc Init Binary: docker-init containerd version: 7ad184331fa3e55e52b890ea95e65ba581ae3429 runc version: dc9208a3303feef5b3839f4323d9beb36df0a9dd init version: fec3683 Security Options: seccomp Profile: default Kernel Version: 4.19.130-boot2docker Operating System: Boot2Docker 19.03.12 (TCL 10.1) OSType: linux Architecture: x86_64 CPUs: 2 Total Memory: 3.852GiB Name: gitlab-test-env ID: AFYU:KGWR:RTE4:FG6E:ZYSC:2TUX:CYRC:3RJW:KDUE:OPZM:KJL2:LMDR Docker Root Dir: /mnt/sda1/var/lib/docker Debug Mode: false Registry: https://index.docker.io/v1/ Labels: provider=virtualbox Experimental: false Insecure Registries: 127.0.0.0/8 Live Restore Enabled: false Product License: Community Engine
可以看到 Name 是 gitlab-test-env，證明已生效
2.5 創建極狐gitlab容器
export IP=$(docker-machine ip $ENV_NAME) docker run -d \ --env GITLAB_OMNIBUS_CONFIG="external_url 'http://$IP:$HTTP_PORT'; gitlab_rails['gitlab_shell_ssh_port'] = $SSH_PORT;" \ --hostname $IP \ -p $HTTP_PORT:$HTTP_PORT -p $SSH_PORT:22 \ --name $CONTAINER_NAME \ registry.gitlab.cn/omnibus/gitlab-jh:$VERSION $ docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 87d83d00755d gitlab/gitlab-ee:14.7.3-ee.0 "/assets/wrapper" 3 minutes ago Up About a minute (health: starting) 80/tcp, 443/tcp, 0.0.0.0:8888->8888/tcp, 0.0.0.0:2222->22/tcp gitlab-test-14.7.3
2.6 訪問極狐gitlab
首先獲取 docker host 虛擬機 ip
$ echo $IP
192.168.99.100
# 獲取 root 賬號初始密碼
docker exec ${CONTAINER_NAME} cat /etc/gitlab/initial_root_password訪問 http://192.168.99.100:8888 即可看到極狐gitlab頁面
到此這篇關于docker machine安裝極狐gitlab的文章就介紹到這了,更多相關docker安裝gitlab內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Docker部署Tomcat并開放8082端口的實現步驟
本文主要介紹了Docker部署Tomcat并開放8082端口的實現步驟,首先安裝docker環境,創建tomcat鏡像,隨后開放端口,具有一定的參考價值,感興趣的可以了解一下2023-10-10
Docker容器定時備份數據庫并發送到指定郵箱(設計思路)
這篇文章主要介紹了Docker容器定時備份數據庫并發送到指定郵箱,文中寫了一下shell腳本，邏輯也很簡單，當前時間與啟動時間相同時，則調用sendmail函數發送郵件，具體腳本跟隨小編一起看看吧2022-01-01
Docker搭建本地私有倉庫的詳細步驟
本篇文章主要介紹了Docker搭建本地私有倉庫的詳細步驟，具有一定的參考價值，感興趣的小伙伴們可以參考一下。2017-02-02
Docker Base Image自己創建具體實現
這篇文章主要介紹了Docker Base Image創建具體實現的相關資料,這里提供了詳細的具體步驟，需要的朋友可以參考下2016-11-11
Docker執行DockerFile構建過程指令解析
這篇文章主要為大家介紹了Docker執行DockerFile構建過程及DockerFile的指令解析，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步早日升職加薪<BR>2022-04-04
這篇文章主要介紹了Mac上使用Docker搭建kafka集群方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-02-02
這篇文章主要介紹了Docker nginx安裝與配置掛載的方法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2019-01-01
Intellij IDEA快速實現Docker鏡像部署的方法步驟
本文主要介紹了Intellij IDEA快速實現Docker鏡像部署的方法步驟，文中通過示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-09-09
MinIO在 Docker中修改登錄賬號和密碼的步驟
本文介紹了如何在Docker容器中運行的MinIO修改登錄賬號和密碼,包括備份數據、停止容器、刪除舊容器、啟動新容器并設置新的賬號和密碼以及驗證修改結果的步驟,感興趣的朋友一起2025-03-03
Docker registry私有鏡像倉庫服務部署案例演示
這篇文章主要為大家介紹了Docker registry私有鏡像倉庫服務部署案例演示，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步早日升職加薪2022-04-04