C++基于reactor的服務器百萬并發實現與講解

更新時間：2022年07月01日 14:09:52 作者：恒者走天下

這篇文章主要介紹了C++基于reactor的服務器百萬并發實現與講解，本文通過實例圖文相結合給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下

一、服務器的代碼實現與講解

結構體代碼主要構建的結構如圖所示
鏈表結構，每個eventblock結點，包括一個ntyevent數組，數組中存儲fd

在這里插入圖片描述

/*結構體定義鏈表數組*/
struct ntyevent {
	int fd;//要監聽的文件描述符
	int events;//對應的監聽事件，	EPOLLIN和EPOLLOUT（不同的事件，走不同的回調函數）
	void *arg;//指向自己結構體指針
	int (*callback)(int fd, int events, void *arg);
	
	int status;//是否在監聽：1->在紅黑樹上（監聽），0->不在（不監聽）
	char buffer[BUFFER_LENGTH];
	int length;
	long last_active;
};

struct eventblock {

	struct eventblock *next;
	struct ntyevent *events;//數組
	
};

struct ntyreactor {
	//句柄
	int epfd;
	//結點個數
	int blkcnt;
	struct eventblock *evblk; //fd --> 100w
};

初始化fd 上樹、下樹代碼

//nty_event_set(event, sockfd, acceptor, reactor);
//初始化sockfd
void nty_event_set(struct ntyevent *ev, int fd, NCALLBACK callback, void *arg) {

	ev->fd = fd;
	ev->callback = callback;
	ev->events = 0;
	ev->arg = arg;
	ev->last_active = time(NULL);

	return ;
	
}
//nty_event_add(reactor->epfd, EPOLLIN, event);
//對監聽的epoll紅黑樹上的結點的修改
int nty_event_add(int epfd, int events, struct ntyevent *ev) {

	struct epoll_event ep_ev = {0, {0}};
	ep_ev.data.ptr = ev;
	ep_ev.events = ev->events = events;

	int op;
	if (ev->status == 1) {
		op = EPOLL_CTL_MOD;
	} else {
		op = EPOLL_CTL_ADD;
		ev->status = 1;
	}

	if (epoll_ctl(epfd, op, ev->fd, &ep_ev) < 0) {
		printf("event add failed [fd=%d], events[%d]\n", ev->fd, events);
		return -1;
	}

	return 0;
}

int nty_event_del(int epfd, struct ntyevent *ev) {

	struct epoll_event ep_ev = {0, {0}};

	if (ev->status != 1) {
		return -1;
	}
	ep_ev.data.ptr = ev;
	ev->status = 0;
	epoll_ctl(epfd, EPOLL_CTL_DEL, ev->fd, &ep_ev);

	return 0;
}

回調函數代碼的書寫
注意看recv_cb的回調函數中，recv之后，立馬下樹，然后又重新初始化fd，上樹。這樣做的目的是因?yàn)榇a邏輯是recv收到數據后，立即原樣send,所以需要對fd的屬性進行更改，需要重新初始化賦值，然后上樹

int recv_cb(int fd, int events, void *arg) {

	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	struct ntyevent *ev = ntyreactor_idx(reactor, fd);

	int len = recv(fd, ev->buffer, BUFFER_LENGTH , 0); // 
	nty_event_del(reactor->epfd, ev);

	if (len > 0) {
		
		ev->length = len;
		ev->buffer[len] = '\0';

		printf("C[%d]:%s\n", fd, ev->buffer);

		nty_event_set(ev, fd, send_cb, reactor);
		nty_event_add(reactor->epfd, EPOLLOUT, ev);
		
		
	} else if (len == 0) {

		close(ev->fd);
		//printf("[fd=%d] pos[%ld], closed\n", fd, ev-reactor->events);
		 
	} else {

		close(ev->fd);
		printf("recv[fd=%d] error[%d]:%s\n", fd, errno, strerror(errno));
		
	}

	return len;
}

int send_cb(int fd, int events, void *arg) {

	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	struct ntyevent *ev = ntyreactor_idx(reactor, fd);

	int len = send(fd, ev->buffer, ev->length, 0);
	if (len > 0) {
		printf("send[fd=%d], [%d]%s\n", fd, len, ev->buffer);

		nty_event_del(reactor->epfd, ev);
		nty_event_set(ev, fd, recv_cb, reactor);
		nty_event_add(reactor->epfd, EPOLLIN, ev);
		
	} else {

		close(ev->fd);

		nty_event_del(reactor->epfd, ev);
		printf("send[fd=%d] error %s\n", fd, strerror(errno));

	}

	return len;
}

int accept_cb(int fd, int events, void *arg) {

	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	if (reactor == NULL) return -1;

	struct sockaddr_in client_addr;
	socklen_t len = sizeof(client_addr);

	int clientfd;

	if ((clientfd = accept(fd, (struct sockaddr*)&client_addr, &len)) == -1) {
		if (errno != EAGAIN && errno != EINTR) {
			
		}
		printf("accept: %s\n", strerror(errno));
		return -1;
	}
	int flag = 0;
	if ((flag = fcntl(clientfd, F_SETFL, O_NONBLOCK)) < 0) {
		printf("%s: fcntl nonblocking failed, %d\n", __func__, MAX_EPOLL_EVENTS);
		return -1;
	}
	/*存儲*/
	struct ntyevent *event = ntyreactor_idx(reactor, clientfd);
	
	nty_event_set(event, clientfd, recv_cb, reactor);
	nty_event_add(reactor->epfd, EPOLLIN, event);

	
	printf("new connect [%s:%d], pos[%d]\n", 
		inet_ntoa(client_addr.sin_addr), ntohs(client_addr.sin_port), clientfd);

	return 0;

}

鏈表的初始化與銷毀

//初始化鏈表
int ntyreactor_init(struct ntyreactor *reactor) {

	if (reactor == NULL) return -1;
	memset(reactor, 0, sizeof(struct ntyreactor));

	reactor->epfd = epoll_create(1);
	if (reactor->epfd <= 0) {
		printf("create epfd in %s err %s\n", __func__, strerror(errno));
		return -2;
	}

	struct ntyevent *evs = (struct ntyevent*)malloc((MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	if (evs == NULL) {
		printf("ntyreactor_alloc ntyevents failed\n");
		return -2;
	}
	memset(evs, 0, (MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));

	struct eventblock *block = (struct eventblock *)malloc(sizeof(struct eventblock));
	if (block == NULL) {
		printf("ntyreactor_alloc eventblock failed\n");
		return -2;
	}
	memset(block, 0, sizeof(struct eventblock));

	block->events = evs;
	block->next = NULL;

	reactor->evblk = block;
	reactor->blkcnt = 1;

	return 0;
}

找到fd應在鏈表數組中存儲的位置并返回

//新增塊數(eventblock結點個數)
//ntyreactor_alloc(reactor);
int ntyreactor_alloc(struct ntyreactor *reactor) {

	if (reactor == NULL) return -1;
	if (reactor->evblk == NULL) return -1;

	struct eventblock *blk = reactor->evblk;
	while (blk->next != NULL) {
		blk = blk->next;
	}

	struct ntyevent *evs = (struct ntyevent*)malloc((MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	if (evs == NULL) {
		printf("ntyreactor_alloc ntyevents failed\n");
		return -2;
	}
	memset(evs, 0, (MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));

	struct eventblock *block = (struct eventblock *)malloc(sizeof(struct eventblock));
	if (block == NULL) {
		printf("ntyreactor_alloc eventblock failed\n");
		return -2;
	}
	memset(block, 0, sizeof(struct eventblock));

	block->events = evs;
	block->next = NULL;

	blk->next = block;
	reactor->blkcnt ++; //

	return 0;
}

//struct ntyevent *event = ntyreactor_idx(reactor, sockfd);
struct ntyevent *ntyreactor_idx(struct ntyreactor *reactor, int sockfd) {

	int blkidx = sockfd / MAX_EPOLL_EVENTS;
	//如果塊數(eventblock結點個數)不能滿足新的sockfd的存放
	while (blkidx >= reactor->blkcnt) {
		//新增塊數(eventblock結點個數)
		ntyreactor_alloc(reactor);
	}

	//找到存放sockfd的塊(eventblock對應的結點)
	int i = 0;
	struct eventblock *blk = reactor->evblk;
	while(i ++ < blkidx && blk != NULL) {
		blk = blk->next;
	}

	//返回對應塊(eventblock對應的結點)的存放sockfd數組的那個具體位置
	return &blk->events[sockfd % MAX_EPOLL_EVENTS];
}

上樹，并初始化鏈表數組上對應的fd

//ntyreactor_addlistener(reactor, sockfds[i], accept_cb);
//上樹，并初始化鏈表數組上對應的fd
int ntyreactor_addlistener(struct ntyreactor *reactor, int sockfd, NCALLBACK *acceptor) {

	if (reactor == NULL) return -1;
	if (reactor->evblk == NULL) return -1;

	//reactor->evblk->events[sockfd];
	//找到sock所在的具體位置
	struct ntyevent *event = ntyreactor_idx(reactor, sockfd);

	初始化sockfd
	nty_event_set(event, sockfd, acceptor, reactor);
	//對監聽的epoll紅黑樹上的結點的修改
	nty_event_add(reactor->epfd, EPOLLIN, event);

	return 0;
}

epollwait

//ntyreactor_run(reactor);
int ntyreactor_run(struct ntyreactor *reactor) {
	if (reactor == NULL) return -1;
	if (reactor->epfd < 0) return -1;
	if (reactor->evblk == NULL) return -1;
	
	struct epoll_event events[MAX_EPOLL_EVENTS+1];
	
	int checkpos = 0, i;

	while (1) {
/*
		long now = time(NULL);
		for (i = 0;i < 100;i ++, checkpos ++) {
			if (checkpos == MAX_EPOLL_EVENTS) {
				checkpos = 0;
			}

			if (reactor->events[checkpos].status != 1) {
				continue;
			}

			long duration = now - reactor->events[checkpos].last_active;

			if (duration >= 60) {
				close(reactor->events[checkpos].fd);
				printf("[fd=%d] timeout\n", reactor->events[checkpos].fd);
				nty_event_del(reactor->epfd, &reactor->events[checkpos]);
			}
		}
*/

		int nready = epoll_wait(reactor->epfd, events, MAX_EPOLL_EVENTS, 1000);
		if (nready < 0) {
			printf("epoll_wait error, exit\n");
			continue;
		}

		for (i = 0;i < nready;i ++) {

			struct ntyevent *ev = (struct ntyevent*)events[i].data.ptr;

			//看fd連接是否發生變化
			if ((events[i].events & EPOLLIN) && (ev->events & EPOLLIN)) {
				ev->callback(ev->fd, events[i].events, ev->arg);
			}
			if ((events[i].events & EPOLLOUT) && (ev->events & EPOLLOUT)) {
				ev->callback(ev->fd, events[i].events, ev->arg);
			}
			
		}

	}
}

main函數；此服務器代碼開設了100個監聽的端口，目的是因?yàn)榭蛻舳藴y試程序也是運行在虛擬機的Ubuntu上，通過開三臺來充當客戶端來進行測試。有因?yàn)橐慌_Ubuntu最多有6w個端口，3臺有18w端口。如果服務器只開設一個監聽端口，則最多有18w端口。因此要達到100w并發則應多開設端口

// 3, 6w, 1, 100 == 
// <remoteip, remoteport, localip, localport>
int main(int argc, char *argv[]) {

	unsigned short port = SERVER_PORT; // listen 8888
	if (argc == 2) {
		port = atoi(argv[1]);//把參數 str 所指向的字符串轉換為一個整數（類型為 int 型）
	}
	struct ntyreactor *reactor = (struct ntyreactor*)malloc(sizeof(struct ntyreactor));
	/*初始化三個結構體，建立鏈表*/
	ntyreactor_init(reactor);

	int i = 0;
	int sockfds[PORT_COUNT] = {0};
	for (i = 0;i < PORT_COUNT;i ++) {
		//端口號的監聽
		sockfds[i] = init_sock(port+i);
		//上樹
		ntyreactor_addlistener(reactor, sockfds[i], accept_cb);
	}

	// epoll_wait
	ntyreactor_run(reactor);
	//
	ntyreactor_destory(reactor);

	for (i = 0;i < PORT_COUNT;i ++) {
		close(sockfds[i]);
	}

	free(reactor);

	return 0;
}

完整服務器代碼展示

/*鏈表存儲數組，把epoll變成對事件的管理,用鏈表數組的目的就是為了回調函數*/
/*recv寫法：代碼邏輯是收到數據后，立即原樣返回所以才那樣寫*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <sys/epoll.h>
#include <arpa/inet.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <time.h>
#define BUFFER_LENGTH		4096
#define MAX_EPOLL_EVENTS	1024
#define SERVER_PORT			8888
#define PORT_COUNT			100
typedef int NCALLBACK(int ,int, void*);
//struct ntyevent *evs = (struct ntyevent*)malloc((MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
struct ntyevent {
	int fd;//要監聽的文件描述符
	int events;//對應的監聽事件，	EPOLLIN和EPOLLOUT（不同的事件，走不同的回調函數）
	void *arg;//指向自己結構體指針
	int (*callback)(int fd, int events, void *arg);
	int status;//是否在監聽：1->在紅黑樹上（監聽），0->不在（不監聽）
	char buffer[BUFFER_LENGTH];
	int length;
	long last_active;
};
struct eventblock {
	struct eventblock *next;
	struct ntyevent *events;//數組
};
struct ntyreactor {
	//句柄
	int epfd;
	//結點個數
	int blkcnt;
	struct eventblock *evblk; //fd --> 100w
};
int recv_cb(int fd, int events, void *arg);
int send_cb(int fd, int events, void *arg);
struct ntyevent *ntyreactor_idx(struct ntyreactor *reactor, int sockfd);
//nty_event_set(event, sockfd, acceptor, reactor);
//初始化sockfd
void nty_event_set(struct ntyevent *ev, int fd, NCALLBACK callback, void *arg) {
	ev->fd = fd;
	ev->callback = callback;
	ev->events = 0;
	ev->arg = arg;
	ev->last_active = time(NULL);
	return ;
}
//nty_event_add(reactor->epfd, EPOLLIN, event);
//對監聽的epoll紅黑樹上的結點的修改
int nty_event_add(int epfd, int events, struct ntyevent *ev) {
	struct epoll_event ep_ev = {0, {0}};
	ep_ev.data.ptr = ev;
	ep_ev.events = ev->events = events;
	int op;
	if (ev->status == 1) {
		op = EPOLL_CTL_MOD;
	} else {
		op = EPOLL_CTL_ADD;
		ev->status = 1;
	}
	if (epoll_ctl(epfd, op, ev->fd, &ep_ev) < 0) {
		printf("event add failed [fd=%d], events[%d]\n", ev->fd, events);
		return -1;
	}
	return 0;
}
int nty_event_del(int epfd, struct ntyevent *ev) {
	struct epoll_event ep_ev = {0, {0}};
	if (ev->status != 1) {
		return -1;
	}
	ep_ev.data.ptr = ev;
	ev->status = 0;
	epoll_ctl(epfd, EPOLL_CTL_DEL, ev->fd, &ep_ev);
	return 0;
}
int recv_cb(int fd, int events, void *arg) {
	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	struct ntyevent *ev = ntyreactor_idx(reactor, fd);
	int len = recv(fd, ev->buffer, BUFFER_LENGTH , 0); // 
	nty_event_del(reactor->epfd, ev);
	if (len > 0) {
		ev->length = len;
		ev->buffer[len] = '\0';
		printf("C[%d]:%s\n", fd, ev->buffer);
		nty_event_set(ev, fd, send_cb, reactor);
		nty_event_add(reactor->epfd, EPOLLOUT, ev);
	} else if (len == 0) {
		close(ev->fd);
		//printf("[fd=%d] pos[%ld], closed\n", fd, ev-reactor->events);
	} else {
		close(ev->fd);
		printf("recv[fd=%d] error[%d]:%s\n", fd, errno, strerror(errno));
	}
	return len;
}
int send_cb(int fd, int events, void *arg) {
	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	struct ntyevent *ev = ntyreactor_idx(reactor, fd);
	int len = send(fd, ev->buffer, ev->length, 0);
	if (len > 0) {
		printf("send[fd=%d], [%d]%s\n", fd, len, ev->buffer);
		nty_event_del(reactor->epfd, ev);
		nty_event_set(ev, fd, recv_cb, reactor);
		nty_event_add(reactor->epfd, EPOLLIN, ev);
	} else {
		close(ev->fd);
		nty_event_del(reactor->epfd, ev);
		printf("send[fd=%d] error %s\n", fd, strerror(errno));
	}
	return len;
}
int accept_cb(int fd, int events, void *arg) {
	struct ntyreactor *reactor = (struct ntyreactor*)arg;
	if (reactor == NULL) return -1;
	struct sockaddr_in client_addr;
	socklen_t len = sizeof(client_addr);
	int clientfd;
	if ((clientfd = accept(fd, (struct sockaddr*)&client_addr, &len)) == -1) {
		if (errno != EAGAIN && errno != EINTR) {
		}
		printf("accept: %s\n", strerror(errno));
		return -1;
	}
	int flag = 0;
	if ((flag = fcntl(clientfd, F_SETFL, O_NONBLOCK)) < 0) {
		printf("%s: fcntl nonblocking failed, %d\n", __func__, MAX_EPOLL_EVENTS);
		return -1;
	}
	/*存儲*/
	struct ntyevent *event = ntyreactor_idx(reactor, clientfd);
	nty_event_set(event, clientfd, recv_cb, reactor);
	nty_event_add(reactor->epfd, EPOLLIN, event);
	printf("new connect [%s:%d], pos[%d]\n", 
		inet_ntoa(client_addr.sin_addr), ntohs(client_addr.sin_port), clientfd);
	return 0;
}
int init_sock(short port) {
	int fd = socket(AF_INET, SOCK_STREAM, 0);
	fcntl(fd, F_SETFL, O_NONBLOCK);
	struct sockaddr_in server_addr;
	memset(&server_addr, 0, sizeof(server_addr));
	server_addr.sin_family = AF_INET;
	server_addr.sin_addr.s_addr = htonl(INADDR_ANY);
	server_addr.sin_port = htons(port);
	bind(fd, (struct sockaddr*)&server_addr, sizeof(server_addr));
	if (listen(fd, 20) < 0) {
		printf("listen failed : %s\n", strerror(errno));
	}
	return fd;
}
//新增塊數(eventblock結點個數)
//ntyreactor_alloc(reactor);
int ntyreactor_alloc(struct ntyreactor *reactor) {
	if (reactor == NULL) return -1;
	if (reactor->evblk == NULL) return -1;
	struct eventblock *blk = reactor->evblk;
	while (blk->next != NULL) {
		blk = blk->next;
	}
	struct ntyevent *evs = (struct ntyevent*)malloc((MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	if (evs == NULL) {
		printf("ntyreactor_alloc ntyevents failed\n");
		return -2;
	}
	memset(evs, 0, (MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	struct eventblock *block = (struct eventblock *)malloc(sizeof(struct eventblock));
	if (block == NULL) {
		printf("ntyreactor_alloc eventblock failed\n");
		return -2;
	}
	memset(block, 0, sizeof(struct eventblock));
	block->events = evs;
	block->next = NULL;
	blk->next = block;
	reactor->blkcnt ++; //
	return 0;
}
//struct ntyevent *event = ntyreactor_idx(reactor, sockfd);
struct ntyevent *ntyreactor_idx(struct ntyreactor *reactor, int sockfd) {
	int blkidx = sockfd / MAX_EPOLL_EVENTS;
	//如果塊數(eventblock結點個數)不能滿足新的sockfd的存放
	while (blkidx >= reactor->blkcnt) {
		//新增塊數(eventblock結點個數)
		ntyreactor_alloc(reactor);
	}
	//找到存放sockfd的塊(eventblock對應的結點)
	int i = 0;
	struct eventblock *blk = reactor->evblk;
	while(i ++ < blkidx && blk != NULL) {
		blk = blk->next;
	}
	//返回對應塊(eventblock對應的結點)的存放sockfd數組的那個具體位置
	return &blk->events[sockfd % MAX_EPOLL_EVENTS];
}
//初始化鏈表
int ntyreactor_init(struct ntyreactor *reactor) {
	if (reactor == NULL) return -1;
	memset(reactor, 0, sizeof(struct ntyreactor));
	reactor->epfd = epoll_create(1);
	if (reactor->epfd <= 0) {
		printf("create epfd in %s err %s\n", __func__, strerror(errno));
		return -2;
	}
	struct ntyevent *evs = (struct ntyevent*)malloc((MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	if (evs == NULL) {
		printf("ntyreactor_alloc ntyevents failed\n");
		return -2;
	}
	memset(evs, 0, (MAX_EPOLL_EVENTS) * sizeof(struct ntyevent));
	struct eventblock *block = (struct eventblock *)malloc(sizeof(struct eventblock));
	if (block == NULL) {
		printf("ntyreactor_alloc eventblock failed\n");
		return -2;
	}
	memset(block, 0, sizeof(struct eventblock));
	block->events = evs;
	block->next = NULL;
	reactor->evblk = block;
	reactor->blkcnt = 1;
	return 0;
}
int ntyreactor_destory(struct ntyreactor *reactor) {
	close(reactor->epfd);
	//free(reactor->events);
	struct eventblock *blk = reactor->evblk;
	struct eventblock *blk_next = NULL;
	while (blk != NULL) {
		blk_next = blk->next;
		free(blk->events);
		free(blk);
		blk = blk_next;
	}
	return 0;
}
//ntyreactor_addlistener(reactor, sockfds[i], accept_cb);
//上樹，并初始化鏈表數組上對應的fd
int ntyreactor_addlistener(struct ntyreactor *reactor, int sockfd, NCALLBACK *acceptor) {
	if (reactor == NULL) return -1;
	if (reactor->evblk == NULL) return -1;
	//reactor->evblk->events[sockfd];
	//找到sock所在的具體位置
	struct ntyevent *event = ntyreactor_idx(reactor, sockfd);
	初始化sockfd
	nty_event_set(event, sockfd, acceptor, reactor);
	//對監聽的epoll紅黑樹上的結點的修改
	nty_event_add(reactor->epfd, EPOLLIN, event);
	return 0;
}
//ntyreactor_run(reactor);
int ntyreactor_run(struct ntyreactor *reactor) {
	if (reactor == NULL) return -1;
	if (reactor->epfd < 0) return -1;
	if (reactor->evblk == NULL) return -1;
	struct epoll_event events[MAX_EPOLL_EVENTS+1];
	int checkpos = 0, i;
	while (1) {
/*
		long now = time(NULL);
		for (i = 0;i < 100;i ++, checkpos ++) {
			if (checkpos == MAX_EPOLL_EVENTS) {
				checkpos = 0;
			}
			if (reactor->events[checkpos].status != 1) {
				continue;
			}
			long duration = now - reactor->events[checkpos].last_active;
			if (duration >= 60) {
				close(reactor->events[checkpos].fd);
				printf("[fd=%d] timeout\n", reactor->events[checkpos].fd);
				nty_event_del(reactor->epfd, &reactor->events[checkpos]);
			}
		}
*/
		int nready = epoll_wait(reactor->epfd, events, MAX_EPOLL_EVENTS, 1000);
		if (nready < 0) {
			printf("epoll_wait error, exit\n");
			continue;
		}
		for (i = 0;i < nready;i ++) {
			struct ntyevent *ev = (struct ntyevent*)events[i].data.ptr;
			//看fd連接是否發生變化
			if ((events[i].events & EPOLLIN) && (ev->events & EPOLLIN)) {
				ev->callback(ev->fd, events[i].events, ev->arg);
			}
			if ((events[i].events & EPOLLOUT) && (ev->events & EPOLLOUT)) {
				ev->callback(ev->fd, events[i].events, ev->arg);
			}
		}
	}
}
// 3, 6w, 1, 100 == 
// <remoteip, remoteport, localip, localport>
int main(int argc, char *argv[]) {
	unsigned short port = SERVER_PORT; // listen 8888
	if (argc == 2) {
		port = atoi(argv[1]);//把參數 str 所指向的字符串轉換為一個整數（類型為 int 型）
	}
	struct ntyreactor *reactor = (struct ntyreactor*)malloc(sizeof(struct ntyreactor));
	/*初始化三個結構體，建立鏈表*/
	ntyreactor_init(reactor);
	int i = 0;
	int sockfds[PORT_COUNT] = {0};
	for (i = 0;i < PORT_COUNT;i ++) {
		//端口號的監聽
		sockfds[i] = init_sock(port+i);
		//上樹
		ntyreactor_addlistener(reactor, sockfds[i], accept_cb);
	}
	// epoll_wait
	ntyreactor_run(reactor);
	//
	ntyreactor_destory(reactor);
	for (i = 0;i < PORT_COUNT;i ++) {
		close(sockfds[i]);
	}
	free(reactor);
	return 0;
}

reactor的寫法感覺和epoll的普通寫法，感覺差別就是reactor多了個回調函數，具體沒啥優點？
epoll是針對io的管理。 reactor對針對事件的管理
不同的事件，針對不同的回調函數
性能上沒啥差異，但提高了代碼的復用性。具體需要自己慢慢體會體會，嗚嗚嗚嗚還有體會到，編程思想不過關。

二、環境設置

限制是fd的限制，系統默認fd最多有1024個，按照一個連接一個fd的做法，那就需要百萬個fd。這里有兩種修改方法，一是使用ulimit -n命令，這個命令重啟就失效；二是修改/etc/security/limits.conf文件，這是永久有效的，重啟或sysctl -p生效。

* hard nofile 1048576
* soft nofile 1048576

hard是硬限制，不能超過該值，soft是軟限制，可以超過，超過后就開始回收。
這個文件里還有一些其他的參數可以了解一下，fs.file_max是fd可取到的最大值，注意與fd最大個數區分。
突破這兩個限制后，還會遇到一個問題，客戶端會報錯：connection timedout。連接超時，即是客戶端未收到服務器對客戶端connect()的回應包。這里有兩種可能，客戶端為收到服務器的包或是服務器未收到客戶端的connect包。事實上，是因?yàn)橄到y(tǒng)有個防火墻iotables，這個防火墻是基于網卡和協議棧之間的過濾機制netfilter實現的。netfilter當連接數到達一定程度時，會不允許再向外發送connect包。修改也是通過/etc/security/limits.conf文件

net.nf_conntrack_max=1048576

突破這些限制，就可以實現百萬并發了。
這里再介紹/etc/security/limits.conf中幾個參數
net.ipv4.tcp_mem=262144 524288 786432是所有TCP協議棧所占空間的大小，單位是頁（4KB）。介紹一下后面寫的三個值，當所占空間大小超過第二個值時，系統會進行優化，此時如果占用空間降到第一個值以下，不再優化，第三個值是上限，不允許分配超過比大小的空間。
net.ipv4.tcp_wmem=2048 2048 4096是每個socket對應的寫緩沖區大小，三個值分別是最小值、默認值、最大值，單位是B。
net.ipv4.tcp_rmem=2048 2048 4096是每個socket對應的讀緩沖區大小，三個值分別是最小值、默認值、最大值，單位是B。
做百萬并發時，如果內存不大，可以相應調小。在實際應用中，如果傳輸大文件，調大；如果傳輸?shù)亩际亲址{(diào)小，就可以接收更多fd。

到此這篇關于C++基于reactor的服務器百萬并發實現的文章就介紹到這了,更多相關reactor服務器百萬并發內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: