# 向集合添加一個或多個成員
SADD key member1 [member2]

# 獲取集合的成員數
SCARD key
# 返回第一個集合與其他集合之間的差異。
SDIFF key1 [key2]
# 返回給定所有集合的差集并存儲在 destination 中
SDIFFSTORE destination key1 [key2]
# 返回給定所有集合的交集
SINTER key1 [key2]
# 返回給定所有集合的交集并存儲在 destination 中
SINTERSTORE destination key1 [key2]
# 判斷 member 元素是否是集合 key 的成員
SISMEMBER key member
# 返回集合中的所有成員
SMEMBERS key
# 將 member 元素從 source 集合移動到 destination 集合
SMOVE source destination member
# 移除并返回集合中的一個隨機元素
SPOP key
# 返回集合中一個或多個隨機數
SRANDMEMBER key [count]
# 移除集合中一個或多個成員
SREM key member1 [member2]
# 返回所有給定集合的并集
SUNION key1 [key2]
# 所有給定集合的并集存儲在 destination 集合中
SUNIONSTORE destination key1 [key2]
# 迭代集合中的元素
SSCAN key cursor [MATCH pattern] [COUNT count]

127.0.0.1:6379>  SADD set-test xiaoming
(integer) 1
(integer) 0
127.0.0.1:6379>  SADD set-test xiaoming1
127.0.0.1:6379>  SADD set-test xiaoming2

127.0.0.1:6379> SMEMBERS set-test
1) "xiaoming2"
2) "xiaoming"
3) "xiaoming1"

void saddCommand(client *c) {
    robj *set;
    int j, added = 0;

    set = lookupKeyWrite(c->db,c->argv[1]);
    if (checkType(c,set,OBJ_SET)) return;
    
    if (set == NULL) {
        set = setTypeCreate(c->argv[2]->ptr);
        dbAdd(c->db,c->argv[1],set);
    }
    for (j = 2; j < c->argc; j++) {
        if (setTypeAdd(set,c->argv[j]->ptr)) added++;
    if (added) {
        signalModifiedKey(c,c->db,c->argv[1]);
        notifyKeyspaceEvent(NOTIFY_SET,"sadd",c->argv[1],c->db->id);
    server.dirty += added;
    addReplyLongLong(c,added);
}
// 當 value 是整數類型使用 intset
// 否則使用哈希表
robj *setTypeCreate(sds value) {
    if (isSdsRepresentableAsLongLong(value,NULL) == C_OK)
        return createIntsetObject();
    return createSetObject();
/* Add the specified value into a set.
 *
 * If the value was already member of the set, nothing is done and 0 is
 * returned, otherwise the new element is added and 1 is returned. */
int setTypeAdd(robj *subject, sds value) {
    long long llval;
    // 如果是 OBJ_ENCODING_HT 說明是哈希類型
    if (subject->encoding == OBJ_ENCODING_HT) {
        dict *ht = subject->ptr;
        dictEntry *de = dictAddRaw(ht,value,NULL);
        if (de) {
            // 設置key ,value 設置成null
            dictSetKey(ht,de,sdsdup(value));
            dictSetVal(ht,de,NULL);
            return 1;
        }
    // OBJ_ENCODING_INTSET 代表是 inset
    } else if (subject->encoding == OBJ_ENCODING_INTSET) {
        if (isSdsRepresentableAsLongLong(value,&llval) == C_OK) {
            uint8_t success = 0;
            subject->ptr = intsetAdd(subject->ptr,llval,&success);
            if (success) {
                /* Convert to regular set when the intset contains
                 * too many entries. */
                // 如果條目過多將會轉換成集合
                size_t max_entries = server.set_max_intset_entries;
                /* limit to 1G entries due to intset internals. */
                if (max_entries >= 1<<30) max_entries = 1<<30;
                if (intsetLen(subject->ptr) > max_entries)
                    setTypeConvert(subject,OBJ_ENCODING_HT);
                return 1;
            }
        } else {
            /* Failed to get integer from object, convert to regular set. */
            setTypeConvert(subject,OBJ_ENCODING_HT);
            /* The set *was* an intset and this value is not integer
             * encodable, so dictAdd should always work. */
            serverAssert(dictAdd(subject->ptr,sdsdup(value),NULL) == DICT_OK);
    } else {
        serverPanic("Unknown set encoding");
    return 0;

typedef struct intset {
    // 編碼方法，指定當前存儲的是 16 位，32 位，還是 64 位的整數
    uint32_t encoding;
    uint32_t length;
    // 實際保存元素的數組
    int8_t contents[];
} intset;

/* Insert an integer in the intset */
intset *intsetAdd(intset *is, int64_t value, uint8_t *success) {
    // 計算value的編碼長度
    uint8_t valenc = _intsetValueEncoding(value);
    uint32_t pos;
    if (success) *success = 1;

    /* Upgrade encoding if necessary. If we need to upgrade, we know that
     * this value should be either appended (if > 0) or prepended (if < 0),
     * because it lies outside the range of existing values. */
    // 如果value的編碼長度大于當前的編碼位數，進行升級
    if (valenc > intrev32ifbe(is->encoding)) {
        /* This always succeeds, so we don't need to curry *success. */
        return intsetUpgradeAndAdd(is,value);
    } else {
        /* Abort if the value is already present in the set.
         * This call will populate "pos" with the right position to insert
         * the value when it cannot be found. */
        // 當前值不存在的時候才進行插入  
        if (intsetSearch(is,value,&pos)) {
            if (success) *success = 0;
            return is;
        }
        is = intsetResize(is,intrev32ifbe(is->length)+1);
        if (pos < intrev32ifbe(is->length)) intsetMoveTail(is,pos,pos+1);
    }
    // 數據插入
    _intsetSet(is,pos,value);
    is->length = intrev32ifbe(intrev32ifbe(is->length)+1);
    return is;
}

/* Search for the position of "value". Return 1 when the value was found and
 * sets "pos" to the position of the value within the intset. Return 0 when
 * the value is not present in the intset and sets "pos" to the position
 * where "value" can be inserted. */
// 如果找到了對應的數據，返回 1 將 pos 設置為對應的位置
// 如果找不到，返回0，設置 pos 為可以為數據可以插入的位置
// intset 中的數據是排好序的，所以使用二分查找來尋找對應的元素  
static uint8_t intsetSearch(intset *is, int64_t value, uint32_t *pos) {
    int min = 0, max = intrev32ifbe(is->length)-1, mid = -1;
    int64_t cur = -1;

    /* The value can never be found when the set is empty */
    if (intrev32ifbe(is->length) == 0) {
        if (pos) *pos = 0;
        return 0;
    } else {
        /* Check for the case where we know we cannot find the value,
         * but do know the insert position. */
        if (value > _intsetGet(is,max)) {
            if (pos) *pos = intrev32ifbe(is->length);
            return 0;
        } else if (value < _intsetGet(is,0)) {
            if (pos) *pos = 0;
        }
    }
    // 使用二分查找
    while(max >= min) {
        mid = ((unsigned int)min + (unsigned int)max) >> 1;
        cur = _intsetGet(is,mid);
        if (value > cur) {
            min = mid+1;
        } else if (value < cur) {
            max = mid-1;
        } else {
            break;
    if (value == cur) {
        if (pos) *pos = mid;
        return 1;
        if (pos) *pos = min;
}

typedef struct dict {
    dictType *type;
    void *privdata;
    // 哈希表數組，長度為2，一個正常存儲數據，一個用來擴容
    dictht ht[2];
    long rehashidx; /* rehashing not in progress if rehashidx == -1 */
    int16_t pauserehash; /* If >0 rehashing is paused (<0 indicates coding error) */
} dict;

// 哈希表結構，通過兩個哈希表使用，實現增量的 rehash  
typedef struct dictht {
    dictEntry **table;
    // hash 容量大小
    unsigned long size;
    // 總是等于 size - 1，用于計算索引值
    unsigned long sizemask;
    // 實際存儲的 dictEntry 數量
    unsigned long used;
} dictht;
//  k/v 鍵值對節點，是實際存儲數據的節點  
typedef struct dictEntry {
    // 鍵對象，總是一個字符串類型的對象
    void *key;
    union {
        // void指針，這意味著它可以指向任何類型
        void *val;
        uint64_t u64;
        int64_t s64;
        double d;
    } v;
    // 指向下一個節點
    struct dictEntry *next;
} dictEntry;

dictEntry *dictAddRaw(dict *d, void *key, dictEntry **existing)
{
    long index;
    dictEntry *entry;
    dictht *ht;

    if (dictIsRehashing(d)) _dictRehashStep(d);
    /* Get the index of the new element, or -1 if
     * the element already exists. */
    if ((index = _dictKeyIndex(d, key, dictHashKey(d,key), existing)) == -1)
        return NULL;
    /* Allocate the memory and store the new entry.
     * Insert the element in top, with the assumption that in a database
     * system it is more likely that recently added entries are accessed
     * more frequently. */
    // 這里來判斷是否正在 Rehash 中
    ht = dictIsRehashing(d) ? &d->ht[1] : &d->ht[0];
    entry = zmalloc(sizeof(*entry));
    entry->next = ht->table[index];
    ht->table[index] = entry;
    ht->used++;
    /* Set the hash entry fields. */
    // 插入具體的數據  
    dictSetKey(d, entry, key);
    return entry;
}

int dictRehash(dict *d, int n) {
    int empty_visits = n*10; /* Max number of empty buckets to visit. */
    // 這里來判斷是否正在 Rehash 中
    if (!dictIsRehashing(d)) return 0;

    // used 實際存儲的 dictEntry 數量
    // 如果有數據進行下面的遷移
    while(n-- && d->ht[0].used != 0) {
        dictEntry *de, *nextde;
        /* Note that rehashidx can't overflow as we are sure there are more
         * elements because ht[0].used != 0 */
        assert(d->ht[0].size > (unsigned long)d->rehashidx);
        while(d->ht[0].table[d->rehashidx] == NULL) {
            d->rehashidx++;
            if (--empty_visits == 0) return 1;
        }
        // 獲取老數據中的數據
        de = d->ht[0].table[d->rehashidx];
        /* Move all the keys in this bucket from the old to the new hash HT */
        while(de) {
            uint64_t h;
            nextde = de->next;
            /* Get the index in the new hash table */
            // 獲取新哈希表的索引
            h = dictHashKey(d, de->key) & d->ht[1].sizemask;
            de->next = d->ht[1].table[h];
            // 將數據放入到新的 dity 中
            d->ht[1].table[h] = de;
            d->ht[0].used--;
            d->ht[1].used++;
            de = nextde;
        d->ht[0].table[d->rehashidx] = NULL;
        d->rehashidx++;
    }
    /* Check if we already rehashed the whole table... */
    // 這里來檢測是否完成了整個的 rehash 操作  
    if (d->ht[0].used == 0) {
        zfree(d->ht[0].table);
        // 將 ht[1] 的內容放入到 ht[0] 中，ht[1] 作為備用，下次 rehash 使用
        d->ht[0] = d->ht[1];
        _dictReset(&d->ht[1]);
        d->rehashidx = -1;
        return 0;
    /* More to rehash... */
    return 1;
}
// 使用增量的方式 rehash 
// 當然數據很大的話，一次遷移所有的數據，顯然是不合理的，會造成Redis線程阻塞，無法服務其他請求。這里 Redis 使用的是漸進式 rehash。
// 在 rehash 期間，每次執行添加，刪除，查找或者更新操作時，除了對命令本身的處理，還會順帶將哈希表1中的數據拷貝到哈希表2中。從索引0開始，每執行一次操作命令，拷貝一個索引位置的數據。  
// 如果沒有讀入和寫入操作，這時候就不能進行 rehash
// 所以會定時執行一定數量的 rehash 操作  
int incrementallyRehash(int dbid) {
    /* Keys dictionary */
    if (dictIsRehashing(server.db[dbid].dict)) {
        dictRehashMilliseconds(server.db[dbid].dict,1);
        return 1; /* already used our millisecond for this loop... */
    /* Expires */
    if (dictIsRehashing(server.db[dbid].expires)) {
        dictRehashMilliseconds(server.db[dbid].expires,1);
    return 0;

# 向有序集合添加一個或多個成員，或者更新已存在成員的分?jǐn)?shù)
ZADD key score1 member1 [score2 member2]

# 獲取有序集合的成員數
ZCARD key
# 計算在有序集合中指定區間分?jǐn)?shù)的成員數
ZCOUNT key min max
# 有序集合中對指定成員的分?jǐn)?shù)加上增量 increment
ZINCRBY key increment member
# 計算給定的一個或多個有序集的交集并將結果集存儲在新的有序集合 destination 中
ZINTERSTORE destination numkeys key [key ...]
# 在有序集合中計算指定字典區間內成員數量
ZLEXCOUNT key min max
# 通過索引區間返回有序集合指定區間內的成員
ZRANGE key start stop [WITHSCORES]
# 通過字典區間返回有序集合的成員
ZRANGEBYLEX key min max [LIMIT offset count]
# 通過分?jǐn)?shù)返回有序集合指定區間內的成員
ZRANGEBYSCORE key min max [WITHSCORES] [LIMIT]
# 返回有序集合中指定成員的索引
ZRANK key member
# 移除有序集合中的一個或多個成員
ZREM key member [member ...]
# 移除有序集合中給定的字典區間的所有成員
ZREMRANGEBYLEX key min max
# 移除有序集合中給定的排名區間的所有成員
ZREMRANGEBYRANK key start stop
# 移除有序集合中給定的分?jǐn)?shù)區間的所有成員
ZREMRANGEBYSCORE key min max
# 返回有序集中指定區間內的成員，通過索引，分?jǐn)?shù)從高到低
ZREVRANGE key start stop [WITHSCORES]
# 返回有序集中指定分?jǐn)?shù)區間內的成員，分?jǐn)?shù)從高到低排序
ZREVRANGEBYSCORE key max min [WITHSCORES]
# 返回有序集合中指定成員的排名，有序集成員按分?jǐn)?shù)值遞減(從大到小)排序
ZREVRANK key member
# 返回有序集中，成員的分?jǐn)?shù)值
ZSCORE key member
# 計算給定的一個或多個有序集的并集，并存儲在新的 key 中
ZUNIONSTORE destination numkeys key [key ...]
# 迭代有序集合中的元素（包括元素成員和元素分值）
ZSCAN key cursor [MATCH pattern] [COUNT count]

127.0.0.1:6379> ZADD test-sset 1 member1
(integer) 1
127.0.0.1:6379> ZADD test-sset 2 member2
(integer) 1
127.0.0.1:6379> ZADD test-sset 3 member3
(integer) 1
127.0.0.1:6379> ZADD test-sset 3 member3
(integer) 0
127.0.0.1:6379> ZADD test-sset 4 member3
(integer) 0
127.0.0.1:6379> ZADD test-sset 5 member5
(integer) 1
127.0.0.1:6379> ZRANGE test-sset 0 10 WITHSCORES
1) "member1"
2) "1"
3) "member2"
4) "2"
5) "member3"
6) "4"
7) "member5"
8) "5"

typedef struct zset {
    dict *dict;
    zskiplist *zsl;
} zset;

typedef struct zskiplist {
    // 頭，尾節點
    struct zskiplistNode *header, *tail;
    // 節點數量
    unsigned long length;
    // 目前表內節點的最大層數
    int level;
} zskiplist;
/* ZSETs use a specialized version of Skiplists */
// ZSETs 使用的是特定版的 Skiplists
typedef struct zskiplistNode {
    // 這里使用 sds 存儲具體的元素
    sds ele;
    // 元素的權重
    double score;
    // 后向指針（為了便于從跳表的尾節點倒序查找）
    struct zskiplistNode *backward;
    // 層
    // 保存著指向其他元素的指針。高層的指針越過的元素?cái)?shù)量大于等于低層的指針，為了提高查找的效率，程序總是從高層先開始訪問，然后隨著元素值范圍的縮小，慢慢降低層次。
    struct zskiplistLevel {
        // 節點上的前向指針
        struct zskiplistNode *forward;
        // 跨度
        // 用于記錄兩個節點之間的距離
        unsigned long span;
    } level[];
} zskiplistNode;

// 代碼地址 https://github.com/redis/redis/blob/6.2/src/t_zset.c
// ZADD 命令
void zaddCommand(client *c) {
    zaddGenericCommand(c,ZADD_IN_NONE);
}

/* This generic command implements both ZADD and ZINCRBY. */
void zaddGenericCommand(client *c, int flags) {
    ...
    /* Lookup the key and create the sorted set if does not exist. */
    zobj = lookupKeyWrite(c->db,key);
    if (checkType(c,zobj,OBJ_ZSET)) goto cleanup;
    if (zobj == NULL) {
        if (xx) goto reply_to_client; /* No key + XX option: nothing to do. */
        // 超過閾值（zset-max-ziplist-entries、zset-max-ziplist-value）后，使用 hashtable + skiplist 存儲
        if (server.zset_max_ziplist_entries == 0 ||
            server.zset_max_ziplist_value < sdslen(c->argv[scoreidx+1]->ptr))
        {
            zobj = createZsetObject();
        } else {
            zobj = createZsetZiplistObject();
        }
        dbAdd(c->db,key,zobj);
    }
// 看下具體的插入過程
int zsetAdd(robj *zobj, double score, sds ele, int in_flags, int *out_flags, double *newscore) {
    /* Turn options into simple to check vars. */
    int incr = (in_flags & ZADD_IN_INCR) != 0;
    int nx = (in_flags & ZADD_IN_NX) != 0;
    int xx = (in_flags & ZADD_IN_XX) != 0;
    int gt = (in_flags & ZADD_IN_GT) != 0;
    int lt = (in_flags & ZADD_IN_LT) != 0;
    /* Update the sorted set according to its encoding. */
    // 如果類型是 ZIPLIST
    if (zobj->encoding == OBJ_ENCODING_ZIPLIST) {
        unsigned char *eptr;
        if ((eptr = zzlFind(zobj->ptr,ele,&curscore)) != NULL) {
             ...
            /* Remove and re-insert when score changed. */
            // 當分?jǐn)?shù)改變時移除并重新插入
            if (score != curscore) {
                zobj->ptr = zzlDelete(zobj->ptr,eptr);
                zobj->ptr = zzlInsert(zobj->ptr,ele,score);
                *out_flags |= ZADD_OUT_UPDATED;
            }
            return 1;
        // 新元素
        } else if (!xx) {
            /* check if the element is too large or the list
             * becomes too long *before* executing zzlInsert. */
            // 如果元素過大就使用跳表
            if (zzlLength(zobj->ptr)+1 > server.zset_max_ziplist_entries ||
                sdslen(ele) > server.zset_max_ziplist_value ||
                !ziplistSafeToAdd(zobj->ptr, sdslen(ele)))
            {
                zsetConvert(zobj,OBJ_ENCODING_SKIPLIST);
            } else {
                if (newscore) *newscore = score;
                *out_flags |= ZADD_OUT_ADDED;
                return 1;
            *out_flags |= ZADD_OUT_NOP;
    /* Note that the above block handling ziplist would have either returned or
     * converted the key to skiplist. */
    // 表示使用的類型是跳表
    if (zobj->encoding == OBJ_ENCODING_SKIPLIST) {
        zset *zs = zobj->ptr;
        zskiplistNode *znode;
        dictEntry *de;
        // 在哈希表中查找元素
        de = dictFind(zs->dict,ele);
        if (de != NULL) {
            /* NX? Return, same element already exists. */
            if (nx) {
                *out_flags |= ZADD_OUT_NOP;
            // 哈希表中獲取元素的權重
            curscore = *(double*)dictGetVal(de);
            /* Prepare the score for the increment if needed. */
            // 更新權重值
            if (incr) {
                score += curscore;
                if (isnan(score)) {
                    *out_flags |= ZADD_OUT_NAN;
                    return 0;
                }
            /* GT/LT? Only update if score is greater/less than current. */
            if ((lt && score >= curscore) || (gt && score <= curscore)) {
            if (newscore) *newscore = score;
            /* Remove and re-insert when score changes. */
            // 如果權重發生變化了
                znode = zslUpdateScore(zs->zsl,curscore,ele,score);
                /* Note that we did not removed the original element from
                 * the hash table representing the sorted set, so we just
                 * update the score. */
                dictGetVal(de) = &znode->score; /* Update score ptr. */
        // 如果新元素不存在
            ele = sdsdup(ele);
            // 插入到跳表節點
            znode = zslInsert(zs->zsl,score,ele);
            // 在哈希表中插入
            serverAssert(dictAdd(zs->dict,ele,&znode->score) == DICT_OK);
            *out_flags |= ZADD_OUT_ADDED;
    } else {
        serverPanic("Unknown sorted set encoding");
    return 0; /* Never reached. */

// 獲取有序集合中, 指定數據的排名.
// 若reverse==0, 排名以得分升序排列. 否則排名以得分降序排列.
// 第一個數據的排名為0, 而不是1
// 使用壓縮列表或者跳表，里面的數據都是排好序的
long zsetRank(robj *zobj, sds ele, int reverse) {
    unsigned long llen;
    unsigned long rank;

    llen = zsetLength(zobj);
    // 壓縮列表
    if (zobj->encoding == OBJ_ENCODING_ZIPLIST) {
        unsigned char *zl = zobj->ptr;
        unsigned char *eptr, *sptr;
        eptr = ziplistIndex(zl,0);
        serverAssert(eptr != NULL);
        sptr = ziplistNext(zl,eptr);
        serverAssert(sptr != NULL);
        rank = 1;
        while(eptr != NULL) {
            if (ziplistCompare(eptr,(unsigned char*)ele,sdslen(ele)))
                break;
            rank++;
            zzlNext(zl,&eptr,&sptr);
        }
        if (eptr != NULL) {
             // 逆向取rank
             // 返回后面的數據
            if (reverse)
                return llen-rank;
            else
                return rank-1;
        } else {
            return -1;
    // 跳表
    } else if (zobj->encoding == OBJ_ENCODING_SKIPLIST) {
        zset *zs = zobj->ptr;
        zskiplist *zsl = zs->zsl;
        dictEntry *de;
        double score;
        de = dictFind(zs->dict,ele);
        if (de != NULL) {
            score = *(double*)dictGetVal(de);
            // 查找包含給定分值和成員對象的節點在跳躍表中的排位
            rank = zslGetRank(zsl,score,ele);
            /* Existing elements always have a rank. */
            serverAssert(rank != 0);
            // 逆向取rank
    } else {
        serverPanic("Unknown sorted set encoding");
    }
}
/*
 * 查找包含給定分值和成員對象的節點在跳躍表中的排位。
 *
 * 如果沒有包含給定分值和成員對象的節點，返回 0 ，否則返回排位。
 * 注意，因?yàn)樘S表的表頭也被計算在內，所以返回的排位以 1 為起始值。
 * T_wrost = O(N), T_avg = O(log N)
 */
unsigned long zslGetRank(zskiplist *zsl, double score, sds ele) {
    zskiplistNode *x;
    unsigned long rank = 0;
    int i;
    x = zsl->header;
    for (i = zsl->level-1; i >= 0; i--) {
        // 遍歷所有對比的節點
        while (x->level[i].forward &&
            (x->level[i].forward->score < score ||
                (x->level[i].forward->score == score &&
                sdscmp(x->level[i].forward->ele,ele) <= 0))) {
            rank += x->level[i].span;
            // 沿著前進指針遍歷跳躍表
            x = x->level[i].forward;
        /* x might be equal to zsl->header, so test if obj is non-NULL */
        if (x->ele && sdscmp(x->ele,ele) == 0) {
            return rank;
    return 0;