//HashMap的主干數組，可以看到就是一個Entry數組，初始值為空數組{}，主干數組的長度一定是2的次冪，至于為什么這么做，后面會有詳細分析。
transient Entry<K,V>[] table = (Entry<K,V>[]) EMPTY_TABLE;

static class Entry<K,V> implements Map.Entry<K,V> {
        final K key;
        V value;
        Entry<K,V> next;//存儲指向下一個Entry的引用，單鏈表結構
        int hash;//對key的hashcode值進行hash運算后得到的值，存儲在Entry，避免重復計算

        /**
         * Creates new entry.
         */
        Entry(int h, K k, V v, Entry<K,V> n) {
            value = v;
            next = n;
            key = k;
            hash = h;
        }

//實際存儲的key-value鍵值對的個數
transient int size;
//閾值，當table == {}時，該值為初始容量（初始容量默認為16）；當table被填充了，也就是為table分配內存空間后，threshold一般為 capacity*loadFactory。HashMap在進行擴容時需要參考threshold，后面會詳細談到
int threshold;
//負載因子，代表了table的填充度有多少，默認是0.75
final float loadFactor;
//用于快速失敗，由于HashMap非線程安全，在對HashMap進行迭代時，如果期間其他線程的參與導致HashMap的結構發生變化了（比如put，remove等操作），需要拋出異常ConcurrentModificationException
transient int modCount;

public HashMap(int initialCapacity, float loadFactor) {
　　　　　//此處對傳入的初始容量進行校驗，最大不能超過MAXIMUM_CAPACITY = 1<<30(230)
        if (initialCapacity < 0)
            throw new IllegalArgumentException("Illegal initial capacity: " +
                                               initialCapacity);
        if (initialCapacity > MAXIMUM_CAPACITY)
            initialCapacity = MAXIMUM_CAPACITY;
        if (loadFactor <= 0 || Float.isNaN(loadFactor))
            throw new IllegalArgumentException("Illegal load factor: " +
                                               loadFactor);

        this.loadFactor = loadFactor;
        threshold = initialCapacity;
　　　　　
        init();//init方法在HashMap中沒有實際實現，不過在其子類如 linkedHashMap中就會有對應實現
    }

public V put(K key, V value) {
        //如果table數組為空數組{}，進行數組填充（為table分配實際內存空間），入?yún)閠hreshold，此時threshold為initialCapacity 默認是1<<4(24=16)
        if (table == EMPTY_TABLE) {
            inflateTable(threshold);
        }
       //如果key為null，存儲位置為table[0]或table[0]的沖突鏈上
        if (key == null)
            return putForNullKey(value);
        int hash = hash(key);//對key的hashcode進一步計算，確保散列均勻
        int i = indexFor(hash, table.length);//獲取在table中的實際位置
        for (Entry<K,V> e = table[i]; e != null; e = e.next) {
        //如果該對應數據已存在，執行覆蓋操作。用新value替換舊value，并返回舊value
            Object k;
            if (e.hash == hash && ((k = e.key) == key || key.equals(k))) {
                V oldValue = e.value;
                e.value = value;
                e.recordAccess(this);
                return oldValue;
            }
        }
        modCount++;//保證并發訪問時，若HashMap內部結構發生變化，快速響應失敗
        addEntry(hash, key, value, i);//新增一個entry
        return null;
    }

private void inflateTable(int toSize) {
        int capacity = roundUpToPowerOf2(toSize);//capacity一定是2的次冪
        threshold = (int) Math.min(capacity * loadFactor, MAXIMUM_CAPACITY + 1);//此處為threshold賦值，取capacity*loadFactor和MAXIMUM_CAPACITY+1的最小值，capaticy一定不會超過MAXIMUM_CAPACITY，除非loadFactor大于1
        table = new Entry[capacity];
        initHashSeedAsNeeded(capacity);
    }

private static int roundUpToPowerOf2(int number) {
        // assert number >= 0 : "number must be non-negative";
        return number >= MAXIMUM_CAPACITY
                ? MAXIMUM_CAPACITY
                : (number > 1) ? Integer.highestOneBit((number - 1) << 1) : 1;
    }

//這是一個神奇的函數，用了很多的異或，移位等運算，對key的hashcode進一步進行計算以及二進制位的調整等來保證最終獲取的存儲位置盡量分布均勻
final int hash(Object k) {
        int h = hashSeed;
        if (0 != h && k instanceof String) {
            return sun.misc.Hashing.stringHash32((String) k);
        }

        h ^= k.hashCode();

        h ^= (h >>> 20) ^ (h >>> 12);
        return h ^ (h >>> 7) ^ (h >>> 4);
    }

/**
     * 返回?cái)?shù)組下標
     */
    static int indexFor(int h, int length) {
        return h & (length-1);
    }

void addEntry(int hash, K key, V value, int bucketIndex) {
        if ((size >= threshold) && (null != table[bucketIndex])) {
            resize(2 * table.length);//當size超過臨界閾值threshold，并且即將發生哈希沖突時進行擴容
            hash = (null != key) ? hash(key) : 0;
            bucketIndex = indexFor(hash, table.length);
        }

        createEntry(hash, key, value, bucketIndex);
    }

void resize(int newCapacity) {
        Entry[] oldTable = table;
        int oldCapacity = oldTable.length;
        if (oldCapacity == MAXIMUM_CAPACITY) {
            threshold = Integer.MAX_VALUE;
            return;
        }

        Entry[] newTable = new Entry[newCapacity];
        transfer(newTable, initHashSeedAsNeeded(newCapacity));
        table = newTable;
        threshold = (int)Math.min(newCapacity * loadFactor, MAXIMUM_CAPACITY + 1);
    }

void transfer(Entry[] newTable, boolean rehash) {
        int newCapacity = newTable.length;
　　　　　//for循環中的代碼，逐個遍歷鏈表，重新計算索引位置，將老數組數據復制到新數組中去（數組不存儲實際數據，所以僅僅是拷貝引用而已）
        for (Entry<K,V> e : table) {
            while(null != e) {
                Entry<K,V> next = e.next;
                if (rehash) {
                    e.hash = null == e.key ? 0 : hash(e.key);
                }
                int i = indexFor(e.hash, newCapacity);
　　　　　　　　　 //將當前entry的next鏈指向新的索引位置,newTable[i]有可能為空，有可能也是個entry鏈，如果是entry鏈，直接在鏈表頭部插入。
                e.next = newTable[i];
                newTable[i] = e;
                e = next;
            }
        }
    }

public V get(Object key) {
　　　　 //如果key為null,則直接去table[0]處去檢索即可。
        if (key == null)
            return getForNullKey();
        Entry<K,V> entry = getEntry(key);
        return null == entry ? null : entry.getValue();
 }

final Entry<K,V> getEntry(Object key) {
            
        if (size == 0) {
            return null;
        }
        //通過key的hashcode值計算hash值
        int hash = (key == null) ? 0 : hash(key);
        //indexFor (hash&length-1) 獲取最終數組索引，然后遍歷鏈表，通過equals方法比對找出對應記錄
        for (Entry<K,V> e = table[indexFor(hash, table.length)];
             e != null;
             e = e.next) {
            Object k;
            if (e.hash == hash && 
                ((k = e.key) == key || (key != null && key.equals(k))))
                return e;
        }
        return null;
    }

/**
 * Created by chengxiao on 2016/11/15.
 */
public class MyTest {
    private static class Person{
        int idCard;
        String name;

        public Person(int idCard, String name) {
            this.idCard = idCard;
            this.name = name;
        }
        @Override
        public boolean equals(Object o) {
            if (this == o) {
                return true;
            }
            if (o == null || getClass() != o.getClass()){
                return false;
            }
            Person person = (Person) o;
            //兩個對象是否等值，通過idCard來確定
            return this.idCard == person.idCard;
        }

    }
    public static void main(String []args){
        HashMap<Person,String> map = new HashMap<Person, String>();
        Person person = new Person(1234,"喬峰");
        //put到hashmap中去
        map.put(person,"天龍八部");
        //get取出，從邏輯上講應該能輸出“天龍八部”
        System.out.println("結果:"+map.get(new Person(1234,"蕭峰")));
    }
}