ORA-00349|激活 ADG 備庫時遇到的問題及處理方法
近日有一套實時同步的 ASM 管理的單機 11204 ADG 備庫，由于業務需要，想要脫離主庫的約束，想激活拉成讀寫庫直接升級成 ASM 管理的 19C，閃回快照模式無法滿足要求，只能 ALTER DATABASE ACTIVATE STANDBY DATABASE 強制切成可讀寫的主庫。說干就干，先將其切成主庫，升級過程等下次在一起討論。
--主庫 --主庫設置為 defer, 取消備庫日志應用，關庫啟動到 mount 狀態進行。 show parameter log_archive_dest_state_2 alter system set log_archive_dest_state_2=defer scope=both sid='*'; --備庫 alter database recover managed standby database cancel; shu immediate startup mount --強制拉成主庫，很遺憾報錯 ORA-00349 SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE; ALTER DATABASE ACTIVATE STANDBY DATABASE * ERROR at line 1: ORA-00349: failure obtaining block size for '+JIEKE_DATA' ORA-15001: diskgroup "JIEKE_DATA" does not exist or is not mounted ORA-15001: diskgroup "JIEKE_DATA" does not exist or is not mounted
使用 ACTIVATE 命令想強制拉成主庫，很遺憾如下圖報錯 ORA-00349。alert 日志中發現有很多清理 redo log 的報錯，“ORA-00313: open failed…”無法打開日志組 5、6、23，于是查看日志組成員確實發現 redolog 創建的有問題，member 成員顯示的為不存在的磁盤組 “+JIEKE_DATA” 而不是具體路徑，真是存在的磁盤組“+JIEKER_DATA”。這就是問題所在，redolog 創建錯誤，切成主庫時 redolog 又是必須的，故報錯了，那么現在就是將這個錯誤的 redolog 重建，問題就會得到解決。但實際上不是這樣的，折騰了好久也沒解決，繼續往下看。
GROUP# Member
---------- ---------------------------------------------------------------------------------------------------
5 +JIEKE_DATA
5 +JIEKE_DATA
6 +JIEKE_DATA
6 +JIEKE_DATA
23 +JIEKE_DATA
23 +JIEKE_DATA
11 +JIEKER_DATA/jiekexu/onlinelog/group_11.1621.1065127343
11 +JIEKER_ARCH/jiekexu/onlinelog/group_11.389.1065127355
12 +JIEKER_DATA/jiekexu/onlinelog/group_12.1620.1065127363
12 +JIEKER_ARCH/jiekexu/onlinelog/group_12.395.1065127371
13 +JIEKER_DATA/jiekexu/onlinelog/group_13.1619.1065127381
SELECT to_char(f.group#) groupno, to_char(l.thread#) thread, f.member member, f.type redo_file_type, l.status group_status, f.status member_status, l.bytes/1024/1024 bytes, l.archived archived
FROM v$logfile f, v$log l WHERE f.group# = l.grSQL> oup# ORDER BY f.group#, f.member;
SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2
Group Thread Member Redo Type Group Status Member Status Size(M) Archived
------ ------ -------------------- ---------- ------------ --------------- -------- ----------
5 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
6 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
23 1 +JIEKE_DATA ONLINE CLEARING_CUR INVALID 4,096 YES
RENT
1 +JIEKE_DATA ONLINE CLEARING_CUR INVALID 4,096 YES
RENT
27 2 +JIEKER_DATA/jiekexu/ ONLINE UNUSED 4,096 YES
onlinelog/group_27.1
741.1065129955
28 2 +JIEKER_DATA/jiekexu/ ONLINE UNUSED 4,096 YES
onlinelog/group_28.1
742.1065129973
alert 日志如下：
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 5 of thread 1
Clearing online redo logfile 5 +JIEKE_DATA
Clearing online log 5 of thread 1 sequence number 4751
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 5 of thread 1
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 5 of thread 1
Clearing online redo logfile 5 complete
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 6 of thread 2
Clearing online redo logfile 6 +JIEKE_DATA
Clearing online log 6 of thread 2 sequence number 2592
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 6 of thread 2
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 6 of thread 2
Clearing online redo logfile 6 complete
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 23 of thread 1
Clearing online redo logfile 23 +JIEKE_DATA
Clearing online log 23 of thread 1 sequence number 4752
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 23 of thread 1
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 23 of thread 1
Clearing online redo logfile 23 complete
Resetting resetlogs activation ID 2008461997 (0x77b6b2ad)
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 5 of thread 1
Errors in file /app/oracle/diag/rdbms/jiekexu/jiekexu/trace/jiekexu_ora_30872.trc:
ORA-00313: open failed for members of log group 5 of thread 1
ORA-349 signalled during: ALTER DATABASE ACTIVATE PHYSICAL STANDBY DATABASE...
Tue Mar 02 22:42:30 2021
alter database drop logfile group 23
ORA-1623 signalled during: alter database drop logfile group 23...
Tue Mar 02 22:45:07 2021
RFS[7]: Assigned to RFS process 10180
RFS[7]: Opened log for thread 2 sequence 2592 dbid 1797812601 branch 1063804222
Archived Log entry 1100 added for thread 2 sequence 2592 rlc 1063804222 ID 0x77b6b2ad dest 2:
Tue Mar 02 22:45:08 2021
RFS[8]: Assigned to RFS process 10277
RFS[8]: Selected log 17 for thread 2 sequence 2593 dbid 1797812601 branch 1063804222
Tue Mar 02 22:45:08 2021
Primary database is in MAXIMUM PERFORMANCE mode
重建備庫 redolog
那么，這里將上演的是重建備庫 redolog 的相關操作步驟。
SQL> alter database drop logfile group 27; alter database drop logfile group 27 * ERROR at line 1: ORA-01156: recovery or flashback in progress may need access to files --由于開啟了日志應用進程，直接刪除會報錯，故需要停止日志應用，修改參數 standby_file_management 為手動。 SQL> alter database recover managed standby database cancel; Database altered. SQL> alter system set standby_file_management='manual' scope=both sid='*'; Database altered. SQL> show parameter standby_file_management NAME TYPE VALUE ------------------------------------ ---------------------- ------------------------------ standby_file_management string manual SQL> alter database drop logfile group 27; Database altered. --由于日志組不能少于 2 個，故 日志組 28 不不能夠刪除。 SQL> alter database drop logfile group 28; alter database drop logfile group 28 * ERROR at line 1: ORA-01567: dropping log 28 would leave less than 2 log files for instance JIEKEXU2 (thread 2) ORA-00312: online log 28 thread 2: '+JIEKER_DATA/jiekexu/onlinelog/group_28.1742.1065129973'
下面則通過繼續應用日志、重啟、主庫切日志、重命名等各種手段繼續嘗試刪除這三個有問題的日志組。
--重啟備庫刪除日志組 6、23，由于是當前日志組無法刪除，慶幸日志組 5 成功刪除了。 SQL> alter database drop logfile group 6; alter database drop logfile group 6 * ERROR at line 1: ORA-01623: log 6 is current log for instance JIEKEXU2 (thread 2) - cannot drop ORA-00312: online log 6 thread 2: '+JIEKE_DATA' ORA-00312: online log 6 thread 2: '+JIEKE_DATA' SQL> alter database drop logfile group 5; Database altered. SQL> alter database drop logfile group 23; alter database drop logfile group 23 * ERROR at line 1: ORA-01623: log 23 is current log for instance jiekexu (thread 1) - cannot drop ORA-00312: online log 23 thread 1: '+JIEKE_DATA' ORA-00312: online log 23 thread 1: '+JIEKE_DATA' --只剩兩組日志組也是當前日志組，則當前日志組無法刪除，嘗試進行 rename 操作，但也是無效或者缺失命令。 SQL> alter database rename '+JIEKE_DATA' to '+JIEKER_DATA'; alter database rename '+JIEKE_DATA' to '+JIEKER_DATA' * ERROR at line 1: ORA-02231: missing or invalid option to ALTER DATABASE SQL> alter database rename '+JIEKE_DATA' to '+JIEKER_DATA/jiekexu/onlinelog/group_6.dbf'; alter database rename '+JIEKE_DATA' to '+JIEKER_DATA/jiekexu/onlinelog/group_6.dbf' * ERROR at line 1: ORA-02231: missing or invalid option to ALTER DATABASE --當然繼續激活為主庫肯定也是報錯。那就繼續開啟日志同步模式，先保持備庫同步吧。 SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE; ALTER DATABASE ACTIVATE STANDBY DATABASE * ERROR at line 1: ORA-00349: failure obtaining block size for '+JIEKE_DATA' ORA-15001: diskgroup "JIEKE_DATA" does not exist or is not mounted ORA-15001: diskgroup "JIEKE_DATA" does not exist or is not mounted SQL> alter database recover managed standby database using current logfile disconnect from session; Database altered.
重建備庫控制文件解決
第二日早晨，睡醒之后頭腦清晰想到備庫既然無法刪除，那主庫肯定是可以刪除的。通過主庫刪除日志組 6、23 之后，再重建一個備庫的控制文件就可以解決。這樣也很簡單，主庫刪除備庫有問題的兩組日志組后使用 rman 備份一個備庫的 控制文件，然后 scp 到備庫，備庫重啟到 nomount 恢復控制文件，啟動到 mount 就好了。
--主庫： SQL> alter database drop logfile group 6; Database altered. SQL> alter database drop logfile group 23; Database altered. rman target / RMAN> backup current controlfile for standby format '/home/oracle/backup20210303%d_%I_%s_%p.ctl'; scp /home/oracle/backup20210303%d_%I_%s_%p.ctl jiekeadg:/home/oracle/ --備庫 SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL; Database altered. SQL> shu immediate ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup nomount ORACLE instance started. Total System Global Area 1.0689E+11 bytes Fixed Size 2265864 bytes Variable Size 4.2144E+10 bytes Database Buffers 6.4425E+10 bytes Redo Buffers 323678208 bytes SQL> exit jiekeadg:/home/oracle(jiekexu)>rman target / Recovery Manager: Release 11.2.0.4.0 - Production on Wed Mar 3 10:07:34 2021 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: JIEKEXU (not mounted) RMAN> restore standby controlfile from '/home/oracle/backup20210303JIEKEXU_1797812601_106_1.ctl'; Starting restore at 2021-03-03 10:08:03 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=3009 device type=DISK channel ORA_DISK_1: restoring control file channel ORA_DISK_1: restore complete, elapsed time: 00:00:01 output file name=+JIEKER_DATA/jiekexu/controlfile/current.1739.1065125909 output file name=+JIEKER_ARCH/jiekexu/controlfile/current.323.1065125911 Finished restore at 2021-03-03 10:08:04 RMAN> sql'alter database mount'; sql statement: alter database mount released channel: ORA_DISK_1 RMAN> exit -- SQLPLUS 里應用 MRP0 進程同步數據。 jiekeadg:/home/oracle(jiekexu)>sqlplus / as sysdba SQL> alter database recover managed standby database using current logfile disconnect from session; Database altered. SQL> / NAME VALUE UNIT TIME_COMPUTED ------------- -------------------- ------------------------------ ------------------------------ transport lag +00 00:00:00 day(2) to second(0) interval 03/03/2021 10:19:08 apply lag +00 00:00:00 day(2) to second(0) interval 03/03/2021 10:19:08
重建控制文件后恢復的備庫中就沒有了錯誤的磁盤組，但這樣時間長一些則備庫日志應用會延遲，因?yàn)?standby_log 日志狀態全部為 UNASSIGNED 的。需要重建備庫 standby redolog 日志組后它的狀態才會變成 ACTIVE。
取消日志應用，修改參數為 manual 刪除原有日志組，重建日志組改回參數應用日志同步進程即可。
SELECT to_char(f.group#) groupno, to_char(l.thread#) thread, f.member member, f.type redo_file_type, l.status group_status, f.status member_status, l.bytes/1024/1024 bytes, l.archived archived
FROM v$logfile f, v$log l WHERE f.group# = l.group# ORDER BY f.group#, f.member;SQL>
SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2
Group Thread Member Redo Type Group Status Member Status Size(M) Archived
------ ------ -------------------- ---------- ------------ --------------- -------- ----------
1 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
3 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
4 1 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES
5 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
7 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
8 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
9 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
10 2 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES
24 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Database altered.
SQL> show parameter standby_file_management
NAME TYPE VALUE
------------------------------------ ---------------------- ------------------------------standby_file_management string manual
SQL>
SQL> select inst_id,GROUP#,THREAD#,SEQUENCE#,USED,ARCHIVED,STATUS from gv$standby_log;
INST_ID GROUP# THREAD# SEQUENCE# USED Archived STATUS
---------- ---------- ---------- ---------- ---------- ---------- --------------------
1 11 1 0 0 YES UNASSIGNED
1 12 1 0 0 YES UNASSIGNED
1 13 1 0 0 YES UNASSIGNED
1 14 1 0 0 YES UNASSIGNED
1 15 1 0 0 YES UNASSIGNED
alter database drop logfile group 11;
alter database drop logfile group 12;
alter database drop logfile group 13;
alter database drop logfile group 14;
alter database drop logfile group 15;
ALTER DATABASE ADD standby LOGFILE THREAD 1 ('+JIEKER_DATA','+JIEKER_ARCH') SIZE 4G;
ALTER DATABASE ADD standby LOGFILE THREAD 1 ('+JIEKER_DATA','+JIEKER_ARCH') SIZE 4G;
ALTER DATABASE ADD standby LOGFILE THREAD 1 ('+JIEKER_DATA','+JIEKER_ARCH') SIZE 4G;
ALTER DATABASE ADD standby LOGFILE THREAD 1 ('+JIEKER_DATA','+JIEKER_ARCH') SIZE 4G;
ALTER DATABASE ADD standby LOGFILE THREAD 1 ('+JIEKER_DATA','+JIEKER_ARCH') SIZE 4G;
SQL> select inst_id,GROUP#,THREAD#,SEQUENCE#,USED,ARCHIVED,STATUS from gv$standby_log;
INST_ID GROUP# THREAD# SEQUENCE# USED Archived STATUS
---------- ---------- ---------- ---------- ---------- ---------- --------------------
1 6 1 4797 3026358272 YES ACTIVE
1 11 1 0 0 YES UNASSIGNED
1 12 1 0 0 YES UNASSIGNED
1 13 1 0 0 YES UNASSIGNED
1 14 1 0 0 YES UNASSIGNED
SQL> alter system set standby_file_management='AUTO' scope=both sid='*';
SQL> alter database open;
alter database recover managed standby database using current logfile disconnect from session;
Database altered.
找到最終問題所在
完成重建后，本以為已經萬事大吉了，但一開庫應用日志卻發現后臺日志中所有 redolog 日志組都被清理了。這才意識到問題的根源所在，立馬查看了路徑相關的參數發現 db_create_online_log_dest 參數設置錯誤，導致創建出了錯誤的磁盤組。
jiekeadg:/home/oracle(jiekexu)>sqlplus / as sysdba SQL*Plus: Release 11.2.0.4.0 Production on Wed Mar 3 10:52:04 2021 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> show parameter db_create_online_log_dest_ NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_create_online_log_dest_1 string +JIEKE_DATA db_create_online_log_dest_2 string +JIEKE_DATA db_create_online_log_dest_3 string db_create_online_log_dest_4 string db_create_online_log_dest_5 string SQL> alter system set db_create_online_log_dest_1='+JIEKER_DATA' scope=spfile; System altered. SQL> alter system set db_create_online_log_dest_2='+JIEKER_DATA' scope=spfile; System altered.
但是現在修改完參數所有的日志組成員也都出現在錯誤的磁盤組了，因?yàn)橛辛?strong>當前日志組 4、10 占用了，重建日志組也行不通，故只能再次重建備庫控制文件了。以上主庫備份控制文件傳到備庫恢復的過程再來一遍即可。
SELECT to_char(f.group#) groupno, to_char(l.thread#) thread, f.member member, f.type redo_file_type, l.status group_status, f.status member_status, l.bytes/1024/1024 bytes, l.archived archived FROM v$logfile f, v$log l WHERE f.group# = l.group# ORDER BY f.group#, f.member;SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 Group Thread Member Redo Type Group Status Member Status Size(M) Archived ------ ------ -------------------- ---------- ------------ --------------- -------- ---------- 1 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 2 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 3 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 4 1 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES 1 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES 5 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 1 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 7 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 8 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 9 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 10 2 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES 2 +JIEKE_DATA ONLINE CURRENT INVALID 4,096 YES 24 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 2 +JIEKE_DATA ONLINE CLEARING INVALID 4,096 YES 20 rows selected.
最終激活備庫
再一次重建后正常恢復同步，然后關閉實例啟動到 mount 狀態，激活 ADG 備庫，重啟驗證即可。
SQL> shu immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> SQL> startup mount ORACLE instance started. Total System Global Area 1.0689E+11 bytes Fixed Size 2265864 bytes Variable Size 4.2144E+10 bytes Database Buffers 6.4425E+10 bytes Redo Buffers 323678208 bytes Database mounted. SQL> SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE; Database altered. SQL> alter database open; Database altered. SQL> select DATABASE_ROLE from v$database; DATABASE_ROLE -------------------------------- PRIMARY SQL> shu immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. Total System Global Area 1.0689E+11 bytes Fixed Size 2265864 bytes Variable Size 4.2144E+10 bytes Database Buffers 6.4425E+10 bytes Redo Buffers 323678208 bytes Database mounted. Database opened. SQL> exit
到此這篇關于ORA-00349|激活 ADG 備庫時遇到的問題及處理方法的文章就介紹到這了,更多相關ORA-00349內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Oracle視圖的創建、使用以及刪除操作方法大全
這篇文章主要給大家介紹了關于Oracle視圖的創建、使用以及刪除操作方法的相關資料,視圖是基于一個表或多個表或視圖的邏輯表,本身不包含數據,通過它可以對表里面的數據進行查詢和修改,需要的朋友可以參考下2023-12-12
oracle常用分析函數與聚合函數的用法
今天小編就為大家分享一篇關于oracle常用分析函數與聚合函數的用法，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2019-01-01
PLSQL Developer連接oracle數據庫配置教程
這篇文章主要介紹了PLSQL Developer連接oracle數據庫配置步驟,本文圖文并茂給大家介紹的非常詳細，具有一定的參考借鑒價值，需要的朋友可以參考下2019-09-09
Oracle BULK COLLECT批量取數據解決方法
在oracle使用中為了提高取數據效率，本文將詳細介紹Oracle BULK COLLECT批量取數據,需要了解跟多的朋友可以參考下2012-11-11
Oracle臨時表空間刪除和重建實現過程
這篇文章主要介紹了Oracle臨時表空間刪除和重建實現過程，臨時表空間是NOLOGGING模式以及它不保存永久類型對象，因此即使數據庫損毀，做Recovery也不需要恢復Temporary?Tablespace。下文更多詳細內容介紹需要的小伙伴可以參考一下2022-03-03
Oracle庫恢復刪除數據的方法小結
誤刪?Oracle?庫中的數據,在不考慮全庫備份和利用歸檔日志情況,如何恢復數據呢,這篇文章將給大家介紹幾種方法恢復數據,文章通過代碼示例給大家介紹的非常詳細,需要的朋友可以參考下2023-12-12
常見數據庫系統比較 Oracle數據庫
常見數據庫系統比較 Oracle數據庫...2007-03-03
oracle 發送郵件 實現方法
oracle 發送郵件 實現方法2009-05-05
這篇文章主要介紹了Windows10環境安裝sdk8,本文通過圖文并茂的形式給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-06-06
使用contains謂詞有個條件，那就是列要建立索引，本節主要介紹了oracle使用instr或like方法判斷是否包含字符串,需要的朋友可以參考下2014-08-08