@echo off
setlocal enabledelayedexpansion
title 修改本機IP地址 by:小小滄海20130409
:init
cls&echo ——————————————自動修改本機IP地址——————————————
rem 系統版本，值可為Windows7或是WindowsXP，或是auto（表示自動獲取）
set SYSVER=auto
rem 要更改的網卡名稱，auto表示自動獲取第一塊“以太網適配器”
set ETH=auto
rem IP來源，值僅為兩個static和dhcp，ques表示詢問，由使用者填寫
rem 靜態IP請?zhí)顚憇tatic，從網關自動獲取IP請?zhí)顚慸hcp
set IPSOURCE=ques
rem 要改成的IP地址，ques同上
set IPADDR=ques
rem 要改成的子網掩碼，ques同上
set MASK=ques
rem 要使用的默認網關，ques同上
set GATEWAY=ques
rem DNS模式，值僅為兩個static和dhcp
rem 靜態DNS請?zhí)顚憇tatic，從網關自動獲取DNS請?zhí)顚慸hcp
set DNSSOURCE=ques
rem 要使用的首選DNS，ques同上
set DNS1=ques
rem 要使用的備用DNS，ques同上
set DNS2=ques
set LOG=%TEMP%\changeIP_log.txt
echo 運行日期:%date% %time%>%LOG%


:start
rem ===============使用者填寫參數值=======================
rem 自動獲取系統版本，結果為 Windows7 或是 WindowsXP(只測試了這兩個系統)
if "%SYSVER%"=="auto" (
  set /p=正在自動獲取系統版本...<nul
  for /f "skip=1 tokens=2-3 delims= " %%i in ('wmic os get caption') do set SYSVER=%%i%%j
  if /i "!SYSVER!"=="Windows7" (
    echo 成功！[Win7]
  ) else (
    if /i "!SYSVER!"=="WindowsXP" (
      echo 成功！[WinXP]
    ) else (
      echo [!SYSVER!]
      echo 【注意】非Win7和XP系統不保證能執行成功！&pause>nul
    )
  )
)

rem 自動獲取網卡名稱
if "%ETH%"=="auto" (
  echo 正在自動獲取網絡適配器信息...
  set index=0
  set select=1
  for /f "skip=3 tokens=4* delims= " %%i in ('netsh interface ipv4 show interfaces^|find /i /v "Loopback"') do (
    set /a index=!index!+1
    set ethname=%%j
    echo [!index!]!ethname!
  )
  if !index!==1 (
    set ETH=!ethname!
  ) else ( if !index! GTR 1 (
    :select
    set /p=請選擇要設置的網卡編號:<nul
    set select=0&set /p select=
    if /i !select! LSS 1 goto select
    if /i !select! GTR !index! goto select
    set index=0
    for /f "skip=3 tokens=4* delims= " %%i in ('netsh interface ipv4 show interfaces^|find /i /v "Loopback"') do (
      set /a index=!index!+1
      if !index!==!select! (
        set ETH=%%j
      )
    )
  ))

  if "!ETH!"=="auto" (
    echo 自動獲取網卡名稱失敗，請右鍵編輯本批處理，手動填寫網卡名稱！&pause>nul&exit
  ) else (
    rem set/p=[!ETH!]<nul
    echo 成功！
  )
)

:quesIP
if "%IPSOURCE%"=="ques" (
  echo →請?zhí)顚憽綢P地址來源】^(值僅為兩個static和dhcp，直接回車為static^)
  set /p IPSOURCE=
  if "!IPSOURCE!"=="ques" set IPSOURCE=static
  if /i "!IPSOURCE!" NEQ "static" (if /i "!IPSOURCE!" NEQ "dhcp" (
    set IPSOURCE=static
    echo IP來源填寫錯誤，將變更為static模式
    pause>nul
  ))
)
if /i "%IPSOURCE%"=="dhcp" goto quesDNS

if "%IPADDR%"=="ques" (
  echo →請?zhí)顚憽綢P地址】^(直接回車為192.168.1.100^)
  set /p IPADDR=
  if "!IPADDR!"=="ques" set IPADDR=192.168.1.100
)

if "%MASK%"=="ques" (
  echo →請?zhí)顚憽咀泳W(wǎng)掩碼】^(直接回車為255.255.255.0^)
  set /p MASK=
  if "!MASK!"=="ques" set MASK=255.255.255.0
)

if "%GATEWAY%"=="ques" (
  echo →請?zhí)顚憽灸J網關】^(直接回車為192.168.1.1^)
  set /p GATEWAY=
  if "!GATEWAY!"=="ques" set GATEWAY=192.168.1.1
)

:quesDNS
if "%DNSSOURCE%"=="ques" (
  echo →請?zhí)顚憽綝NS來源】^(值僅為兩個static和dhcp，直接回車為static^)
  set /p DNSSOURCE=
  if "!DNSSOURCE!"=="ques" set DNSSOURCE=static
  if /i "!DNSSOURCE!" NEQ "static" (if /i "!DNSSOURCE!" NEQ "dhcp" (
    set DNSSOURCE=static
    echo DNS來源填寫錯誤，將變更為static模式
    pause>nul
  ))
)
if /i "%DNSSOURCE%"=="dhcp" goto checkInfo

if "%DNS1%"=="ques" (
  echo →請?zhí)顚憽臼走xDNS地址】^(直接回車為8.8.8.8^)
  set /p DNS1=
  if "!DNS1!"=="ques" set DNS1=8.8.8.8
)

if "%DNS2%"=="ques" (
  echo →請?zhí)顚憽緜溆肈NS地址】^(直接回車為8.8.4.4^)
  set /p DNS2=
  if "!DNS2!"=="ques" set DNS2=8.8.4.4
)


:checkInfo
cls
echo 即將應用以下配置：
call :showInfo
echo 請確認信息是否正確，輸入Y繼續，輸入N退出，輸入Q顯示本機網絡信息
set choose=nul&set /p choose=
if /i "%choose%"=="nul" goto checkInfo
if /i "%choose%"=="N" exit
if /i "%choose%"=="Q" call :getInfo & pause & goto checkInfo
if /i "%choose%" NEQ "Y" goto checkInfo
echo ★注意★請關閉防火墻或允許所有彈出的安全軟件提示，否則無法成功執行！

:changeIP
rem 通過dhcp刪除原有IP配置
echo →設置"%ETH%"的IP源為DHCP，以刪除原有IP地址 >>%LOG%
netsh -c interface ip set address name="%ETH%" source=dhcp >>%LOG%
if /i "%IPSOURCE%"=="static" (
  echo →設置IP為"%IPADDR%"，掩碼為"%MASK%"，網關為"%GATEWAY%" >>%LOG%
  netsh -c interface ip set address name="%ETH%" source=static address="%IPADDR%" mask="%MASK%" gateway="%GATEWAY%" gwmetric=1 >>%LOG%
)
rem 刪除原有DNS配置
echo →刪除原有DNS配置 >>%LOG%
netsh -c interface ip delete dns "%ETH%" all >>%LOG%
if /i "%DNSSOURCE%"=="static" (
  echo →設置首選DNS為%DNS1% >>%LOG%
  netsh -c interface ip add dns name="%ETH%" addr="%DNS1%" index=1 >>%LOG%
  echo →設置備用DNS為%DNS2% >>%LOG%
  netsh -c interface ip add dns name="%ETH%" addr="%DNS2%" index=2 >>%LOG%
  rem ↑此處可繼續增加多個DNS服務器地址
) else (if /i "%DNSSOURCE%"=="dhcp" (
  echo →設置DNS為DHCP模式 >>%LOG%
  netsh -c interface ip set dns name="%ETH%" dhcp >>%LOG%
))

:end
cls
rem echo 【要設定的信息】
rem call :showInfo
echo 【當前本機信息】
call :getInfo
echo ======================================
echo 如果上下一致則說明修改成功！
echo 如果不一致則請查看日志文件！
echo 輸入L查看日志文件，輸入E退出程序。
set choose=nul&set /p choose=
if /i "%choose%"=="L" start %LOG%&goto end
if /i "%choose%"=="E" exit
if /i "%choose%"=="nul" goto end


echo 程序執行結束，按任意鍵退出...
pause>nul
exit


:showInfo
echo 【本機系統】：%SYSVER%
echo 【網卡名稱】：%ETH%
echo 【IP來源 】：%IPSOURCE%
if "%IPSOURCE%"=="static" (
  echo 【IP地址 】：%IPADDR%
  echo 【子網掩碼】：%MASK%
  echo 【默認網關】：%GATEWAY%
)
echo 【DNS來源 】：%DNSSOURCE%
if "%DNSSOURCE%"=="static" (
  echo 【首選DNS 】：%DNS1%
  echo 【備用DNS 】：%DNS2%
)
rem goto :eof等于返回return
goto :eof


:getInfo
netsh -c interface ip show address name="%ETH%"
netsh -c interface ip show dns name="%ETH%"
goto :eof

:windows7

==============================================
接口 "本地連接" 的配置
  DHCP 已啟用:            否
  IP 地址:              192.168.1.253
  子網前綴:             192.168.1.0/24 (掩碼 255.255.255.0)
  默認網關:             192.168.1.1
  網關躍點數:            1
  InterfaceMetric:          20
  
  
接口 "本地連接" 的配置
  靜態配置的 DNS 服務器:      8.8.8.8
                   8.8.4.4
  用哪個前綴注冊:          只是主要

@echo off
mode con cols=70 lines=38
color a
title D-小蘇-學習-Bat-快速修改本地IP地址
:ShowReadme
cls
echo.
echo *********************學習-Bat-快速修改本地IP地址**********************
echo.
echo 實現功能（以下情況下測試通過）：
echo 1.多連接名稱：自動獲取網絡連接名稱
echo 2.多連接屬性：有線連接，無線連接，虛擬連接
echo 3.多操作系統：Windows XP，Windows 7 / 8.1
echo 4.多網絡連接：無線連接2個，有線連接1個，VMware連接2個
echo 5.區域的DNS：判斷計算機可以連接互聯網則采用當前DNS設置
echo 6.空格名稱：VMware Virtual Ethernet Adapter for VMnet1
echo 7.優化設置：優化選擇步驟，添加選擇序號，保存配置內容
echo 8.設置方法：可轉換Netsh interface ip set 和WMIC nicconfig 
echo 9.獲取優化：判斷網關值，存儲有效的網關值以打開路由器設置頁
echo.
echo *********************學習-Bat-快速修改本地IP地址**********************
ping -n 1 127.1 >nul
:Set_localTemp
setlocal enabledelayedexpansion
ver | find "6." > NUL &&(cls&echo. &echo -------------------------------當前系統為 Windows 7以上系統 &Set "WindowsVer=Windows 7" &goto :Set_NetConnectionID)
cls&echo. &echo -------------------------------當前系統不是 Windows 7以上系統 &Set "WindowsVer=WindowsXP" &goto :Set_NetConnectionID
:Set_NetConnectionID
rem 獲取設置網絡連接名稱
cls
echo.
echo *************選擇網絡連接名稱*****************IN %WindowsVer%**********
echo.
set "str=DefaultIPGateway^,IPAddress^,DNSServerSearchOrder^,IPSubnet^,DHCPEnabled"
for /f "skip=1tokens=1*" %%i in ('wmic Nic where "Manufacturer<>'Microsoft' and NetConnectionStatus='2'" get Index^,NetConnectionID^') do (
  for /f "tokens=1* delims=:" %%j in ("%%j") do (
    set $%%i=%%j
Echo %%i_%%j>>適配器_Index_Name.txt
echo. 
echo 適配器_ID_Index： %%i 
echo 適配器_名_NName： %%j
    for /f "tokens=1-3delims={}," %%a in ('wmic Nicconfig where "Index='%%i'" get %str% /value') do (
      for /f %%c in (%%c) do if /i "%%a" == "DNSServerSearchOrder=" set "DNS2=%%c"
      for /f %%c in ("%%a%%~b") do set "%%c"
    )
    if /i "!DHCPEnabled!" == "TRUE" (
     echo 適配器_IP_模式 ： 自動
    ) else echo 適配器_IP_模式 ： 手動 
IF not defined Net_IP set Net_IP=!IPAddress! 
echo 適配器_IP_地址 ： !IPAddress! Net_IP_地址 : !Net_IP!
IF not defined Net_MASK set Net_MASK=!IPSubnet! 
Rem 判斷是否存在值，以解決之后Net_MASK賦值為空的情況，保證Net_MASK存在值
echo 適配器_子網掩碼： !IPSubnet!  Net_子網掩碼: !Net_MASK!
IF not defined Net_gateway set Net_gateway=!DefaultIPGateway!
    echo 適配器_默認網關： !DefaultIPGateway!  Net_默認網關: !Net_gateway!
IF not defined Net_dnsPra set Net_dnsPra=!DNSServerSearchOrder!
echo 適配器_首選_DNS： !DNSServerSearchOrder!  Net_首選_DNS: !Net_dnsPra!
    IF defined dns2 set Net_dns2=!DNS2! &echo 適配器_配用_DNS ：!DNS2!  Net_配用_DNS: !Net_dns2!
  )
)
echo. 
echo. 
echo ************************選擇網絡連接名稱*****************************
(for /f "tokens=1* delims=:" %%a in ('findstr /n .* 適配器_Index_Name.txt') do echo ID_%%a_%%b)>適配器_ID_Index_Name.txt
REM 生成選擇結構，添加序號ID_，避免純查找數字序號會關鍵詞的查找重復
for /f "tokens=2-4 delims=_" %%a in (適配器_ID_Index_Name.txt) do (
set NetConID=%%a 
  set NetConnectionID_Index=%%b
set NetConnectionName_Index=%%c
echo 適配器ID：!NetConID! 標號Index：!NetConnectionID_Index! 名稱：!NetConnectionName_Index!
)
echo *************選擇網絡連接名稱*****************IN %WindowsVer%***********
:Set_Net_Ask
Echo.
echo.
set /p NetConID=選擇需要配置 適配器 對應 數字ID :
if /i "%NetConID%" == "q" exit
echo.
echo.
set NetConnectionName_Index=
for /f "tokens=2-4 delims=_" %%a in ('findstr "ID_%NetConID%" 適配器_ID_Index_Name.txt') do (
setlocal enabledelayedexpansion
  set NetConnectionID_Index=%%b 
set NetConnectionName_Index=%%c
echo 當前選擇適配器ID：!NetConID! 標號Index：!NetConnectionID_Index! 名稱：!NetConnectionName_Index!
)
if "%NetConnectionName_Index%" == "" (echo 選擇選項超出范疇 ... &ping -n 3 127.1>nul &goto Set_Net_Ask) else (set net_interface=%NetConnectionName_Index% &echo 名稱：!net_interface! )
if exist 適配器_Index_Name.txt (del /a /f /s /q 適配器_Index_Name.txt) else echo 適配器_Index_Name.txt文件夾不存在
if exist 適配器_ID_Index_Name.txt (del /a /f /s /q 適配器_ID_Index_Name.txt) else echo 適配器_ID_Index_Name.txt文件夾不存在
ping -n 1 127.1>nul
:Set_RamdonIP
Rem 如果計算機可以連接互聯網，判斷網絡DNS、網關是否可用，可以連接互聯網則只改IP，啟用當前區域DNS...
Rem 獲得可上網IP前三位，設置為隨機IP前三位
if "%Net_IP%" == "" (echo 設置Net_IP &set Net_IP=192.168.1.128) 
for /f "tokens=1-4 delims=/." %%a in ("%Net_IP%") do (set IPa_=%%a.%%b.%%c)
set /a IPb_=%random%%%255+3
set "net_IPnew=%IPa_%.%IPb_%"
echo 隨機IP前三位[%IPa_%]  生成隨機IP [%net_IPnew%]
ping 127.0.0.1 -n 1 >nul 1>nul
ping www.baidu.com &echo %errorlevel%
if %errorlevel% equ 1 goto:Set_Net_Set_NoHave
if %errorlevel% equ 0 goto:Set_Net_Set_Have
:Set_Net_Set_Have
Echo 當前計算機可以連通互聯網...啟用當前區域DNS...
set Net_Ping=1
set Net_IP_Diy=%net_IPnew%
Rem 當前IP地址
ping -n 1 127.0.0.1>nul
goto DiyCHOICE
:Set_Net_Set_NoHave
Echo 當前計算機無法連通互聯網...
set Net_Ping=0
set Net_IP_Diy=%net_IPnew%
set "Net_MASK=255.255.255.0"
set "Net_gateway=192.168.1.1"
set "Net_dnsPra=202.100.192.68"
set "Net_dns2=202.100.199.8"
ping -n 1 127.0.0.1>nul
goto DiyCHOICE
:DiyCHOICE
cls
echo.
echo ****************************IP快速切換程序***************************
echo.
echo 當前選擇網絡連接：
echo  ID：%NetConID%  名稱：%net_interface%
echo.
echo.
echo --------------1.修改為隨機IP---------------------%Net_IP_Diy%
echo --------------2.設自動獲取IP---------------------XXX.XXX.X.XXX
echo --------------3.手動設網關IP---------------------192.XXX.X.XXX
echo --------------4.查看網絡設置---------------------%Net_IP%
echo --------------5.設置路由器頁---------------------%Net_gateway%
echo.
echo --------------r.重啟網卡-------------------------x.退出程序---
echo.
echo.
echo **** IN %WindowsVer% *******************************Tools By S34205****
echo.
echo.
echo.
if "%Net_Ping%" == "1" (echo 當前計算機可以連接互聯網，啟用當前區域DNS...) else (echo 當前計算機無法連接互聯網，可能需要設置您區域DNS....)
echo 隨機的IP:[%Net_IP_Diy%]
echo 子網掩碼:[%Net_MASK%]
echo 默認網關:[%Net_gateway%]
echo 首選DNS:[%Net_dnsPra%]
IF defined dns2 echo 備用DNS:[%Net_dns2%]
echo.
echo.
ping -n 1 127.1 >nul 
echo.
:Diysetchoice
set /p SetChoice_C= 請輸入操作：
Echo.
Echo.
IF NOT "%SetChoice_C%"=="" SET SetChoice_C=%SetChoice_C:~0,1%
if /i "%SetChoice_C%"=="1" goto Static_ip
if /i "%SetChoice_C%"=="2" goto DHCP_ip
if /i "%SetChoice_C%"=="3" goto Diy_ip
if /i "%SetChoice_C%"=="4" goto Look_ip
if /i "%SetChoice_C%"=="5" goto Set_Moden_Web
if /i "%SetChoice_C%"=="r" goto rebootnet
if /i "%SetChoice_C%"=="x" goto END
echo 輸入的選擇超出范圍...
ping -n 3 127.1>nul 
goto DiyCHOICE
:Static_ip
echo.
echo 設置隨機IP：[%Net_IP_Diy%] ...
REM netsh interface ip set address name="%net_interface%" source=static addr=%Net_IP_Diy% mask=%net_MASK%
REM echo 設置IP成功...
REM Echo 設置網關... 
REM netsh interface ip set address name="%net_interface%" gateway=%Net_gateway% gwmetric=1 
REM echo 設置DNS...
REM netsh interface ip set dns name="%net_interface%" static addr=%Net_dnsPra% register=PRIMARY
REM netsh interface ip add dns name="%net_interface%" addr=%Net_dns2% index=2
wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Net_IP_Diy%),(%net_MASK%)
wmic nicconfig where index=%NetConnectionID_Index% call setgateways(%Net_gateway%)
wmic nicconfig where index=%NetConnectionID_Index% call setdnsdomain(%Net_dnsPra%)　　
wmic nicconfig where index=%NetConnectionID_Index% call SetDNSServerSearchOrder(%Net_dns2%)
goto Set_IP_Done
:DHCP_ip
echo. 
echo 正在設置IP為自動獲取,請等待...
REM echo 設置IP中...
REM netsh interface ip set address name="%net_interface%" source=dhcp
REM echo 設置網關成功...設置DNS中... 
REM netsh interface ip set dns "%net_interface%" source=dhcp
wmic path Win32_NetworkAdapterConfiguration.index=%NetConnectionID_Index% call enabledhcp
wmic path Win32_NetworkAdapterConfiguration.index=%NetConnectionID_Index% call SetDNSServerSearchOrder()
goto Set_IP_Done
:Diy_ip
set/p Net_IP_Diy=請輸入IP地址 XXX.XXX.XXX.XXX：
set/p Net_gateway=請輸入網關地址 XXX.XXX.XXX.XXX： 
set/p Net_dnsPra=請輸入主dns地址 XXX.XXX.XXX.XXX: 
REM netsh interface ip set address name="%net_interface%"source=static addr=%Net_IP_Diy% mask=255.255.255.0 
REM netsh interface ip set address name="%net_interface%" gateway=%Net_gateway% gwmetric=0 
REM netsh interface ip set dns name="%net_interface%" source=static addr=%Net_dnsPra% register=PRIMARY 
wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Net_IP_Diy%),(%net_MASK%)
wmic nicconfig where index=%NetConnectionID_Index% call setgateways(%Net_gateway%)
wmic nicconfig where index=%NetConnectionID_Index% call setdnsdomain(%Net_dnsPra%)　　
wmic nicconfig where index=%NetConnectionID_Index% call SetDNSServerSearchOrder(%Net_dns2%)
goto Set_IP_Done
:Look_ip
Echo.
if "%LookNum%" == "2" (
Echo 打開：控制面板-網絡連接...
ping -n 1 127.1>nul
start control ncpa.cpl
Echo 說明：開啟環境延遲第二次Bat運行適配器屬性不會改變，所以第二次次信息查看需要手動查看屬性... &Echo.
echo,前次%net_interface%地址的IP:%IPAddress% &echo,前次%net_interface%子網掩碼:%IPSubnet% &echo,前次%net_interface%默認網關:%DefaultIPGateway% 
ping -n 6 127.1>nul &goto Set_IP_Done
)
set LookNum=1
set /a LookNum+=1
Echo 查看網絡連接%net_interface%的屬性：
set "w1=wmic nic where "NetConnectionID="%net_interface%"" get Index"
for /f %%a in ('%w1% ^| findstr /b [0-9]') do set "n=%%a"
set "w2=wmic nicconfig where "Index='%n%'" get DefaultIPGateway^,IPAddress^,IPSubnet"
for /f tokens^=1-2delims^={^" %%a in ('%w2% /value^|find "."')do set "%%a%%b"
echo,%net_interface%地址的IP:%IPAddress%
echo,%net_interface%子網掩碼:%IPSubnet%
echo,%net_interface%默認網關:%DefaultIPGateway%
ping -n 6 127.1>nul
goto Set_IP_Done
:rebootnet
echo 重啟網卡中...請稍等...
ping -n 3 127.1>nul
netsh interface set interface "%net_interface%" disabled
netsh interface set interface "%net_interface%" enable
goto Set_IP_Done
:Set_Moden_Web
Echo 需要修改%net_interface%IP為網關地址段[%Net_gateway%]...
set /p SetChoice_Web=是(1) 否(2) 返回(3)  : 
Echo.
IF NOT "%SetChoice_Web%"=="" SET SetChoice_Web=%SetChoice_Web:~0,1%
if /i "%SetChoice_Web%"=="1" goto Set_web_ip
if /i "%SetChoice_Web%"=="2" goto Set_no_web_ip
if /i "%SetChoice_Web%"=="2" goto DiyCHOICE
echo 輸入的選擇超出范圍...
ping -n 3 127.1>nul 
goto :Set_Moden_Web
:Set_web_ip
Rem 獲得網關前三位，設置為IP前三位，如果不存在則創建
if "%Net_gateway%" == "" (echo 設置Net_gateway &set Net_gateway=192.168.1.1) 
for /f "tokens=1-4 delims=/." %%a in ("%Net_gateway%") do (set Set_web_IPa_=%%a.%%b.%%c)
set /a Set_web_IPb_=%random%%%255+3
set "Set_web_net_IPnew=%Set_web_IPa_%.%Set_web_IPb_%"
echo IP前三位:%Set_web_IPa_%   后一位：%Set_web_IPb_%
echo 正在設置%net_interface%為網關IP[%Set_web_net_IPnew%]......
wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Set_web_net_IPnew%),(%net_MASK%)
echo 已經設置%net_interface%為網關IP[%Set_web_net_IPnew%]......
goto :Set_no_web_ip
:Set_no_web_ip
Echo 當前網關為：%Net_gateway% ，正在打開 http://%Net_gateway% ....
ping %Net_gateway% >nul
start "%programfiles%\Internet Explorer\iexplore" http://%Net_gateway%
ping -n 3 127.1>nul
goto :Set_IP_Done
:Set_IP_Done
echo.
echo OK,設置完成...
ping -n 1 127.1>nul 
echo OK,任務完成,返回選擇菜單...
ping -n 1 127.1>nul 
GOTO DiyCHOICE
:end
echo **********************退出......................*********************
Endlocal
ping -n 3 127.1>nul
exit

@echo off
for /f "delims=" %%a in ('wmic NIC where "NetEnabled='TRUE'" get MACAddress^,NetConnectionID /value^|find "="') do set %%a
for /f "delims=" %%a in ('wmic NICCONFIG where "MACAddress='%MACAddress%'" get IPAddress /value^|find "="') do set %%a
for /f "delims={," %%a in ("%IPAddress%") do set ip=%%~a
for /f "tokens=1-4 delims=." %%a in ("%ip%") do set last=%%d
echo;%ip%
echo;%last%
echo;%NetConnectionID%

netsh interface ipv4 set address name="本地連接" addr=192.168.1.%last% mask=255.255.255.0 gwmetric=30
netsh interface ipv4 add address name="本地連接" addr=192.168.2.%last% mask=255.255.255.0 gateway=192.168.2.1 gwmetric=1
exit